See <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/2660/display/redirect?page=changes> Changes: [Oliver Smith] jenkins-common: use debian 13 by default ------------------------------------------ [...truncated 5.39 KiB...] --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_S1GW_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ --pull -t osmocom-build/debian-buster-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 1.69kB done #1 DONE 0.0s #2 [auth] sharing credentials for registry.osmocom.org #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian/eol:buster #3 DONE 0.0s #4 [internal] load .dockerignore #4 transferring context: 2B done #4 DONE 0.0s #5 [1/6] FROM registry.osmocom.org/debian/eol:buster@sha256:5f76f7019dfb38f3f2e55fbf5ab4ce00dfb69dcf9a4d42b5d8c800c3d0d1245d #5 DONE 0.0s #6 [6/6] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_10//RELEASE /tmp/Release #6 DONE 0.0s #7 [internal] load build context #7 transferring context: 2.04kB done #7 DONE 0.0s #8 [3/6] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #8 CACHED #9 [5/6] RUN APT-KEY add /tmp/Release.key && rm /tmp/Release.key && echo "deb " https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10/ " ./" > /etc/apt/sources.list.d/osmocom-nightly.list #9 CACHED #10 [2/6] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends autoconf autoconf-archive autogen automake bison build-essential ca-certificates cppcheck dahdi-source debhelper devscripts dh-autoreconf dh-systemd doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi git git-buildpackage gnupg libc-ares-dev libdbd-sqlite3 libdbi-dev libfftw3-dev libgnutls28-dev libgps-dev libgsm1-dev libncurses5-dev libnewlib-arm-none-eabi libortp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtool libusb-1.0-0-dev libusb-dev make netcat-openbsd pkg-config sqlite3 stow telnet tcpdump wget && apt-get clean #10 CACHED #11 [4/6] COPY .COMMON/RELEASE.KEY /tmp/Release.key #11 CACHED #12 [6/6] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_10//RELEASE /tmp/Release #12 CACHED #13 exporting to image #13 exporting layers done #13 writing image sha256:27b888cb3ed52236996d65fab436a5bafe7f995d9ec87e447a60b710a2da2add done #13 naming to docker.io/osmocom-build/debian-buster-build:latest done #13 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/debian-buster-build'> + docker_image_exists debian-buster-build + docker images -q osmocom-build/debian-buster-build + test -n 27b888cb3ed5 + list_osmo_packages debian-buster debian-buster-build + local distro=debian-buster + local image=debian-buster-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-buster-build -c + [ -n ] + return + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends sigtran-tests + local feed + depends= + [ -n ] + docker_distro_from_image_name sigtran-tests + echo debian-trixie + distro_arg=debian-trixie + [ -z ] + docker_upstream_distro_from_image_name sigtran-tests + echo debian:trixie + upstream_distro_arg=debian:trixie + docker_dir_from_image_name sigtran-tests + echo sigtran-tests + dir=sigtran-tests + [ -z ] + pull_arg=--pull + grep ^FROM ../sigtran-tests/Dockerfile + from_line=FROM $USER/debian-buster-build + echo FROM $USER/debian-buster-build + grep -q $USER + pull_arg= + set +x Building image: sigtran-tests (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../sigtran-tests BUILD_ARGS= UPSTREAM_DISTRO=debian:trixie DISTRO=debian-trixie IMAGE=osmocom-build/sigtran-tests OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/sigtran-tests'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:trixie \ --build-arg DISTRO=debian-trixie \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg M3UA_TESTTOOL_BRANCH=osmocom/master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_S1GW_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ -t osmocom-build/sigtran-tests:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 545B done #1 WARN: InvalidDefaultArgInFrom: Default value for ARG $USER/debian-buster-build results in empty or invalid base image name (line 5) #1 DONE 0.0s #2 [internal] load metadata for docker.io/osmocom-build/debian-buster-build:latest #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/4] FROM docker.io/osmocom-build/debian-buster-build:latest #4 DONE 0.0s #5 [3/4] RUN PIP3 install junit-xml #5 CACHED #6 [2/4] RUN APT-GET update && apt-get -y install guile-2.0 guile-2.0-dev gnulib tcsh python3 python3-pip #6 CACHED #7 [4/4] RUN CD /tmp && git clone https://github.com/nplab/guile-sctp && cd guile-sctp && ./bootstrap && ./configure && make && make install #7 CACHED #8 exporting to image #8 exporting layers done #8 writing image sha256:04f370fbfc91f4c07891c394f496b5440c4d822f4b2c110f4e1165a1abcc6f80 done #8 naming to docker.io/osmocom-build/sigtran-tests:latest 0.0s done #8 DONE 0.0s 1 warning found (use docker --debug to expand):  - InvalidDefaultArgInFrom: Default value for ARG $USER/debian-buster-build results in empty or invalid base image name (line 5) rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/sigtran-tests'> + docker_image_exists sigtran-tests + docker images -q osmocom-build/sigtran-tests + test -n 04f370fbfc91 + list_osmo_packages debian-trixie sigtran-tests + local distro=debian-trixie + local image=sigtran-tests + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/sigtran-tests -c + [ -n ] + return + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-stp-latest + local feed + echo debian-trixie-obs-latest + depends=debian-trixie-obs-latest + [ -n debian-trixie-obs-latest ] + docker_images_require debian-trixie-obs-latest + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-trixie-obs-latest + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-trixie-obs-latest + echo debian-trixie + distro_arg=debian-trixie + [ -z ] + docker_upstream_distro_from_image_name debian-trixie-obs-latest + echo debian:trixie + upstream_distro_arg=debian:trixie + docker_dir_from_image_name debian-trixie-obs-latest + echo debian-trixie-obs-latest + dir=debian-trixie-obs-latest + [ -z ] + pull_arg=--pull + grep ^FROM ../debian-trixie-obs-latest/Dockerfile grep: ../debian-trixie-obs-latest/Dockerfile: No such file or directory + from_line= + echo + grep -q $USER + set +x Building image: debian-trixie-obs-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-trixie-obs-latest BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:trixie DISTRO=debian-trixie IMAGE=osmocom-build/debian-trixie-obs-latest OSMO_TTCN3_BRANCH=master make: *** ../debian-trixie-obs-latest: No such file or directory. Stop. + exit 1 + RC=1 + uptime + grep --color=always -o load.* load average: 0.17, 0.24, 0.58 + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?