Build failed in Jenkins: master-sysmo-usim-tool » a1=default,a2=default,a3=default,a4=default,simtester #1807
See <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a2=default,a3=default,a4=default,label=simtester/1807/display/redirect?page=changes> Changes: [pmaier@sysmocom.de] cosmetic: rename Ki to Key ------------------------------------------ [...truncated 45.46 KB...] - * Authentication successful - * Remaining attempts: 3 - -Reading Milenage Sequence parameters... - * Initalizing... - * Current SQN Configuration: - IND (bits): 5 - SQN Check enabled: 1 - SQN Age Limit enabled: 0 - SQN Max Delta enabled: 1 - SQNms Offset (into SQN array): 0 - Max Delta: 268435456 - Age Limit: 268435456 - - * Current SQN Array: - SEQ[000]: 0 - SEQ[001]: 0 - SEQ[002]: 0 - SEQ[003]: 0 - SEQ[004]: 0 - SEQ[005]: 0 - SEQ[006]: 0 - SEQ[007]: 0 - SEQ[008]: 0 - SEQ[009]: 0 - SEQ[010]: 0 - SEQ[011]: 0 - SEQ[012]: 0 - SEQ[013]: 0 - SEQ[014]: 0 - SEQ[015]: 0 - SEQ[016]: 0 - SEQ[017]: 0 - SEQ[018]: 0 - SEQ[019]: 0 - SEQ[020]: 0 - SEQ[021]: 0 - SEQ[022]: 0 - SEQ[023]: 0 - SEQ[024]: 0 - SEQ[025]: 0 - SEQ[026]: 0 - SEQ[027]: 0 - SEQ[028]: 0 - SEQ[029]: 0 - SEQ[030]: 0 - SEQ[031]: 0 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -* Authentication Counter: DISABLED + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -67,13 +22,11 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - - * Resetting SQN Configuration to defaults... - * Initalizing... - * Resetting... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 08_seq.sh FAILED! ==> Executing Testcase 09_mnclen.sh --- 09_mnclen.out 2023-06-18 15:44:03.180489371 +0200 +++ /tmp/filetfIVeG 2023-06-22 21:49:19.608756772 +0200 @@ -6,18 +6,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -26,18 +22,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -46,18 +38,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x03 - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -66,18 +54,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x03 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -86,18 +70,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -106,15 +86,11 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 09_mnclen.sh FAILED! Summary: 9 Tests failed Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3015 killed; [ssh-agent] Stopped. Archiving artifacts
See <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a2=default,a3=default,a4=default,label=simtester/1808/display/redirect?page=changes> Changes: [pmaier@sysmocom.de] tests: restore incorrect ADM PIN ------------------------------------------ [...truncated 45.30 KB...] - * Authentication successful - * Remaining attempts: 3 - -Reading Milenage Sequence parameters... - * Initalizing... - * Current SQN Configuration: - IND (bits): 5 - SQN Check enabled: 1 - SQN Age Limit enabled: 0 - SQN Max Delta enabled: 1 - SQNms Offset (into SQN array): 0 - Max Delta: 268435456 - Age Limit: 268435456 - - * Current SQN Array: - SEQ[000]: 0 - SEQ[001]: 0 - SEQ[002]: 0 - SEQ[003]: 0 - SEQ[004]: 0 - SEQ[005]: 0 - SEQ[006]: 0 - SEQ[007]: 0 - SEQ[008]: 0 - SEQ[009]: 0 - SEQ[010]: 0 - SEQ[011]: 0 - SEQ[012]: 0 - SEQ[013]: 0 - SEQ[014]: 0 - SEQ[015]: 0 - SEQ[016]: 0 - SEQ[017]: 0 - SEQ[018]: 0 - SEQ[019]: 0 - SEQ[020]: 0 - SEQ[021]: 0 - SEQ[022]: 0 - SEQ[023]: 0 - SEQ[024]: 0 - SEQ[025]: 0 - SEQ[026]: 0 - SEQ[027]: 0 - SEQ[028]: 0 - SEQ[029]: 0 - SEQ[030]: 0 - SEQ[031]: 0 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -* Authentication Counter: DISABLED + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -67,13 +22,11 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - - * Resetting SQN Configuration to defaults... - * Initalizing... - * Resetting... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 08_seq.sh FAILED! ==> Executing Testcase 09_mnclen.sh --- 09_mnclen.out 2023-06-18 15:44:03.180489371 +0200 +++ /tmp/file9qF8Zt 2023-06-22 22:00:28.624325593 +0200 @@ -6,18 +6,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -26,18 +22,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -46,18 +38,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x03 - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -66,18 +54,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x03 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -86,18 +70,14 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH @@ -106,15 +86,11 @@ USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 09_mnclen.sh FAILED! Summary: 9 Tests failed Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3332 killed; [ssh-agent] Stopped. Archiving artifacts
participants (1)
-
jenkins@lists.osmocom.org