Build failed in Jenkins: master-osmo-bts » lc15,origin/nrw/litecell15,0,default,osmocom-master #9247
9 Jan
2024
9 Jan
'24
5:15 p.m.
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRMWARE_VERSION=origin%2Fnrw%2Flitecell15,WITH_MANUALS=0,a4=default,label=osmocom-master/9247/display/redirect>
Changes:
------------------------------------------
[...truncated 216.66 KB...]
-(bts=0,trx=1) ramping TRX board output power to 0 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=12000, tgt_pout=33000, ramp_att=21000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 2000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=14000, tgt_pout=33000, ramp_att=19000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 4000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=16000, tgt_pout=33000, ramp_att=17000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 6000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=18000, tgt_pout=33000, ramp_att=15000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 8000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=20000, tgt_pout=33000, ramp_att=13000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 10000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=22000, tgt_pout=33000, ramp_att=11000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 12000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=24000, tgt_pout=33000, ramp_att=9000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 14000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=26000, tgt_pout=33000, ramp_att=7000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 16000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=28000, tgt_pout=33000, ramp_att=5000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 18000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=30000, tgt_pout=33000, ramp_att=3000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 20000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=32000, tgt_pout=33000, ramp_att=1000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 22000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=33000, tgt_pout=33000, ramp_att=0, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 23000 mdBm.
-(bts=0,trx=1) power_ramp_start(cur=-10000, tgt=10000)
-(bts=0,trx=1) ramp_timer_cb(cur_pout=0, tgt_pout=10000, ramp_att=10000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 0 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=2000, tgt_pout=10000, ramp_att=8000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 2000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=4000, tgt_pout=10000, ramp_att=6000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 4000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=6000, tgt_pout=10000, ramp_att=4000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 6000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=8000, tgt_pout=10000, ramp_att=2000, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 8000 mdBm.
-(bts=0,trx=1) ramp_timer_cb(cur_pout=10000, tgt_pout=10000, ramp_att=0, therm_att=0,
user_gain=0)
-(bts=0,trx=1) ramping TRX board output power to 10000 mdBm.
8. testsuite.at:48: 8. tx_power (testsuite.at:48): FAILED (testsuite.at:52)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:41: testing bs_power_loop ...
./testsuite.at:45: $abs_top_builddir/tests/power/bs_power_loop_test
--- experr 2024-01-09 16:15:13.417965955 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2024-01-09 16:15:13.417965955 +0000
@@ -1,191 +0,0 @@
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 10 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 12 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 14 dB => 16 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 18 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 18 dB => 20 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg
-50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg
-50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 16 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg
-100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg
-100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 4 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 8 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 12 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 16 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 20 dB:max 20 dB, RSSI[curr
-50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg
-50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 14 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 8 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 2 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 2 dB => 0 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg
-100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0),
RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 11 dB:max 20 dB, RSSI[curr
-79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(32), RXQUAL-FULL(0),
RXLEV-SUB(32), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 20 dB, RSSI[curr
-78, avg -78, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 13 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0),
RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 13 dB => 16 dB:max 20 dB, RSSI[curr
-77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(29), RXQUAL-FULL(0),
RXLEV-SUB(29), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 10 dB => 9 dB:max 20 dB, RSSI[curr
-81, avg -81, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 9 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(27), RXQUAL-FULL(0),
RXLEV-SUB(27), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 9 dB => 6 dB:max 20 dB, RSSI[curr -83,
avg -83, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 6 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(25), RXQUAL-FULL(0),
RXLEV-SUB(25), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 6 dB => 1 dB:max 20 dB, RSSI[curr -85,
avg -85, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 1 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(00), RXQUAL-FULL(7),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(63), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(1),
RXLEV-SUB(30), RXQUAL-SUB(1), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 1, avg 1, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(2),
RXLEV-SUB(30), RXQUAL-SUB(2), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 2, avg 2, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3),
RXLEV-SUB(30), RXQUAL-SUB(3), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 3, avg 3, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(4),
RXLEV-SUB(30), RXQUAL-SUB(4), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr
-80, avg -80, thresh -80..-80] dBm, RxQual[curr 4, avg 4, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(34), RXQUAL-FULL(5),
RXLEV-SUB(34), RXQUAL-SUB(5), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr
-76, avg -76, thresh -80..-80] dBm, RxQual[curr 5, avg 5, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(38), RXQUAL-FULL(6),
RXLEV-SUB(38), RXQUAL-SUB(6), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -72,
avg -72, thresh -80..-80] dBm, RxQual[curr 6, avg 6, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(7),
RXLEV-SUB(42), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -68,
avg -68, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(7),
RXLEV-SUB(46), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -64, avg
-64, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(0),
RXLEV-SUB(46), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -64,
avg -64, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(44), RXQUAL-FULL(0),
RXLEV-SUB(44), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -66,
avg -66, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(0),
RXLEV-SUB(42), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -68,
avg -68, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7),
RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7),
RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50,
avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0),
RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0),
RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr
-100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0),
RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 13 dB:max 16 dB, RSSI[curr
-79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0),
RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr
-82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0),
RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 16 dB, RSSI[curr
-77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0),
RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr
-82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0),
RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -79, avg
-79, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0),
RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg
-82, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0),
RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -77, avg
-77, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0),
RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg
-82, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0),
RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg
-80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0),
RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 14 dB:max 30 dB, RSSI[curr
-84, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0),
RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 11 dB:max 30 dB, RSSI[curr
-84, avg -83, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0),
RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 12 dB:max 30 dB, RSSI[curr
-75, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
-(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0),
RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 30 dB, RSSI[curr
-75, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0]
7. testsuite.at:41: 7. bs_power_loop (testsuite.at:41): FAILED (testsuite.at:45)
Build step 'Execute shell' marked build as failure
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 3628884 killed;
[ssh-agent] Stopped.
Archiving artifacts
9 Jan
9 Jan
5:44 p.m.
New subject: Jenkins build is back to normal : master-osmo-bts » lc15,origin/nrw/litecell15,0,default,osmocom-master #9248
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRMWARE_VERSION=origin%2Fnrw%2Flitecell15,WITH_MANUALS=0,a4=default,label=osmocom-master/9248/display/redirect>
121
days inactive
121
days old
jenkins-notifications@lists.osmocom.org
1 comments
1 participants
participants (1)
-
jenkins＠lists.osmocom.org