Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #30109
Changes:
------------------------------------------ [...truncated 1.17 MiB...] timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 codec-list fr1 hr1 fr2 fr3 hr3 allow-emergency deny amr-config 12_2k allowed amr-config 10_2k allowed amr-config 7_95k allowed amr-config 7_40k allowed amr-config 6_70k allowed amr-config 5_90k allowed amr-config 5_15k allowed amr-config 4_75k allowed amr-payload octet-aligned msc-addr addr-dyn-msc-default asp-protocol m3ua lcls-mode disabled lcls-codec-mismatch forbidden bsc mid-call-timeout 0 end [1;36m[1;33mDNM[0;m[1;36m [1;33mNOTICE[0;m[1;36m shutting down OML for BTS 0 (bsc_init.c:57)[0;m signal 15 received
RESULTS: pass: ./acch_overpower.vty pass: ./bts_features.vty pass: ./cbc.vty pass: ./early_ia.vty pass: ./gprs_params.vty pass: ./handover_cfg.vty pass: ./interf_meas.vty pass: ./msc.vty pass: ./neighbor_ident.vty pass: ./nri_cfg.vty pass: ./osmo-bsc.vty pass: ./power_ctrl.vty pass: ./si2quater_neighbor_list.vty pass: ./smlc.vty pass: ./timer.vty pass: ./timeslot.vty
make[6]: Leaving directory '/build/tests' osmotestvty.py -p /build -w /build -v test_history (__main__.TestVTY.test_history) ... confpath /build, workdir /build Running tests for specific VTY commands Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build Opening /dev/null Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/56728/fd
total 0 lr-x------ 1 build build 64 Aug 19 13:24 0 -> pipe:[20811468] l-wx------ 1 build build 64 Aug 19 13:24 1 -> pipe:[20811469] l-wx------ 1 build build 64 Aug 19 13:24 2 -> pipe:[20811470] l-wx------ 1 build build 64 Aug 19 13:24 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 0.0.0.0:3002 0.0.0.0:* LISTEN 0 10 0.0.0.0:3003 0.0.0.0:* LISTEN 0 10 127.0.0.1:4249 0.0.0.0:* LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
ps xua | grep osmo
build 1 0.0 0.0 2584 1600 ? Ss 13:22 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 7 0.0 0.0 2672 1772 ? S 13:22 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 56728 40.0 0.0 21040 15476 ? S 13:24 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 56729 40.0 0.0 21474943132 53424 ? S 13:24 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 56736 0.0 0.0 2672 1876 ? S 13:24 0:00 /bin/sh -c ps xua | grep osmo build 56738 0.0 0.0 3888 1900 ? S 13:24 0:00 grep osmo
ok test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40766), raddr=('127.0.0.1', 4242)> (1 sockets open) Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40766), raddr=('127.0.0.1', 4242)> (0 sockets open) Process returned code: 0 Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/56728/fd
total 0 lr-x------ 1 build build 64 Aug 19 13:24 0 -> pipe:[20811468] l-wx------ 1 build build 64 Aug 19 13:24 1 -> pipe:[20811469] l-wx------ 1 build build 64 Aug 19 13:24 2 -> pipe:[20811470] l-wx------ 1 build build 64 Aug 19 13:24 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 0.0.0.0:3002 0.0.0.0:* LISTEN 0 10 0.0.0.0:3003 0.0.0.0:* LISTEN 0 10 127.0.0.1:4249 0.0.0.0:* LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
ps xua | grep osmo
build 1 0.0 0.0 2584 1600 ? Ss 13:22 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 7 0.0 0.0 2672 1772 ? S 13:22 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 56728 12.1 0.0 21040 15668 ? S 13:24 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 56740 16.6 0.0 21474943132 55384 ? S 13:24 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 56747 0.0 0.0 2672 1812 ? S 13:24 0:00 /bin/sh -c ps xua | grep osmo build 56749 0.0 0.0 3888 1964 ? S 13:24 0:00 grep osmo
ok test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40776), raddr=('127.0.0.1', 4242)> (1 sockets open) Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40776), raddr=('127.0.0.1', 4242)> (0 sockets open) Process returned code: 0 Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/56728/fd
total 0 lr-x------ 1 build build 64 Aug 19 13:24 0 -> pipe:[20811468] l-wx------ 1 build build 64 Aug 19 13:24 1 -> pipe:[20811469] l-wx------ 1 build build 64 Aug 19 13:24 2 -> pipe:[20811470] l-wx------ 1 build build 64 Aug 19 13:24 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 0.0.0.0:3002 0.0.0.0:* LISTEN 0 10 0.0.0.0:3003 0.0.0.0:* LISTEN 0 10 127.0.0.1:4249 0.0.0.0:* LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
ps xua | grep osmo
build 1 0.0 0.0 2584 1600 ? Ss 13:22 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 7 0.0 0.0 2672 1772 ? S 13:22 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 56728 7.1 0.0 21040 15668 ? S 13:24 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v build 56751 33.3 0.0 21474943132 53368 ? S 13:24 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 56758 0.0 0.0 2672 1792 ? S 13:24 0:00 /bin/sh -c ps xua | grep osmo build 56760 0.0 0.0 3888 2016 ? S 13:24 0:00 grep osmo
ok
---------------------------------------------------------------------- Ran 3 tests in 0.687s
OK Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40792), raddr=('127.0.0.1', 4242)> (1 sockets open) Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40792), raddr=('127.0.0.1', 4242)> (0 sockets open) Process returned code: 0 osmotestconfig.py -p /build -w /build -v Warning: doc/examples/osmo-bsc/nokia/osmo-bsc.insite.cfg is not being tested Warning: doc/examples/osmo-bsc/nokia/osmo-bsc.metrosite.RF-hopping.2TRX.cfg is not being tested Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus01-4trx.cfg is not being tested Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-8trx.cfg is not being tested Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-1trx-1pdch-64kbps.cfg is not being tested Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-4trx.cfg is not being tested Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-1trx-1pdch-16kbps.cfg is not being tested Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.rbs2308.cfg is not being tested Warning: doc/examples/osmo-bsc/siemens/osmo-bsc.bs11.cfg is not being tested Verifying src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg, test verify_doc Opening /dev/null Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/56762/fd
total 0 lr-x------ 1 build build 64 Aug 19 13:24 0 -> pipe:[20811468] l-wx------ 1 build build 64 Aug 19 13:24 1 -> pipe:[20811469] l-wx------ 1 build build 64 Aug 19 13:24 2 -> pipe:[20811470] l-wx------ 1 build build 64 Aug 19 13:24 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 0.0.0.0:3002 0.0.0.0:* LISTEN 0 10 0.0.0.0:3003 0.0.0.0:* LISTEN 0 10 127.0.0.1:4249 0.0.0.0:* LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
ps xua | grep osmo
build 1 0.0 0.0 2584 1600 ? Ss 13:22 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 7 0.0 0.0 2672 1772 ? S 13:22 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh build 56762 30.0 0.0 21280 15896 ? S 13:24 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 56763 20.0 0.0 21474943132 59568 ? S 13:24 0:00 src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg build 56770 0.0 0.0 2672 1868 ? S 13:24 0:00 /bin/sh -c ps xua | grep osmo build 56772 0.0 0.0 3888 2008 ? S 13:24 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40798), raddr=('127.0.0.1', 4242)> (1 sockets open) Terminating took 0.897s Process returned code: 0 Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40798), raddr=('127.0.0.1', 4242)> (0 sockets open) Traceback (most recent call last): File "/usr/local/bin/osmotestconfig.py", line 192, in <module> sys.exit(test_all_apps(apps, configs, ignore_configs=ignores, ~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ confpath=confpath, verbose=args.verbose)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/bin/osmotestconfig.py", line 153, in test_all_apps test_config(app, config, tmpdir, verbose) ~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/bin/osmotestconfig.py", line 32, in test_config newconfig = copy_config(tmpdir, config) File "/usr/local/bin/osmotestconfig.py", line 74, in copy_config os.mkdir(dirname) ~~~~~~~~^^^^^^^^^ OSError: [Errno 28] No space left on device: 'writtenconfig' make[5]: *** [Makefile:711: python-tests] Error 1 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:731: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:569: check-am] Error 2 make[2]: Leaving directory '/build/tests' make[2]: *** [Makefile:419: check-recursive] Error 1 make[1]: *** [Makefile:462: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:761: check] Error 2 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build mv: error writing '/build/workspace.tar.xz': No space left on device Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3311996 killed; [ssh-agent] Stopped. Archiving artifacts
jenkins-notifications@lists.osmocom.org
-
jenkins＠lists.osmocom.org