Build failed in Jenkins: update-osmo-ci-on-slaves » build4-deb12build-ansible #3112
See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/3112/display/redirect?page=changes> Changes: [Oliver Smith] Update Release.key for Osmocom OBS ------------------------------------------ [...truncated 1.03 MiB...] #17 23.70 Building wheel for pytlv (setup.py): started #17 23.83 Building wheel for pytlv (setup.py): finished with status 'done' #17 23.83 Created wheel for pytlv: filename=pytlv-0.71-py2.py3-none-any.whl size=16606 sha256=059c22b217148c837dc99c74426f4af73cacea088815fb0d228f599af6258525 #17 23.83 Stored in directory: /root/.cache/pip/wheels/ef/7c/d8/e0f4af40e0231f40f63199f2bf7014ad923f3e01f744324f4d #17 23.83 Successfully built lcov_cobertura sphinx-argparse smpplib asn1tools smpp.pdu smpp.twisted3 pyscard pytlv #17 23.90 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, ply, zope-interface, wcwidth, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals-py, pyscard, pyparsing, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 #17 29.88 #17 29.89 Successfully installed Jinja2-3.1.6 Twisted-23.10.0 alabaster-1.0.0 asn1tools-0.166.0 attrs-25.4.0 automat-25.4.16 babel-2.17.0 bidict-0.23.1 bitstruct-8.21.0 certifi-2025.10.5 cffi-2.0.0 charset_normalizer-3.4.4 cmd2-2.7.0 colorlog-6.10.1 constantly-23.10.4 construct-2.10.70 cryptography-46.0.3 gsm0338-1.1.0 hyperlink-21.0.0 idna-3.11 imagesize-1.4.1 incremental-24.7.2 jsonpath-ng-1.7.0 lcov_cobertura-2.0.2 markdown-it-py-4.0.0 mdurl-0.1.2 ply-3.11 pockets-0.9.1 pycparser-2.23 pycryptodomex-3.23.0 pyosmocom-0.0.9 pyparsing-3.2.5 pyperclip-1.11.0 pyscard-2.3.0 pyserial-3.5 pytlv-0.71 requests-2.32.5 rich-14.2.0 rich-argparse-1.7.1 roman-numerals-py-3.1.0 ruff-0.14.1 six-1.17.0 smpp.pdu-0.3 smpp.pdu3-0.6 smpp.twisted3-0.8 smpplib-2.1.0 snowballstemmer-3.0.1 sphinx-8.2.3 sphinx-argparse-0.4.0 sphinxcontrib-applehelp-2.0.0 sphinxcontrib-devhelp-2.0.0 sphinxcontrib-htmlhelp-2.1.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-napoleon-0.7 sphinxcontrib-qthelp-2.0.0 sphinxcontrib-serializinghtml-2.0.0 termcolor-3.1.0 urllib3-2.5.0 wcwidth-0.2.14 zope-interface-8.0.1 #17 29.89 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning. #17 DONE 31.4s #18 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTER?FORMAT=TEXT /tmp/osmo-python-tests-commit #18 DONE 0.4s #19 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #19 0.713 + git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests #19 0.714 Cloning into 'osmo-python-tests'... #19 0.845 + cd osmo-python-tests #19 0.845 + python3 setup.py clean build install #19 0.952 running clean #19 0.956 running build #19 0.956 running build_py #19 0.960 creating build/lib/osmopy #19 0.960 copying osmopy/__init__.py -> build/lib/osmopy #19 0.960 copying osmopy/osmoutil.py -> build/lib/osmopy #19 0.960 copying osmopy/obscvty.py -> build/lib/osmopy #19 0.960 copying osmopy/trap_helper.py -> build/lib/osmopy #19 0.961 copying osmopy/osmo_ipa.py -> build/lib/osmopy #19 0.961 creating build/lib/osmopy/osmo_interact #19 0.961 copying osmopy/osmo_interact/__init__.py -> build/lib/osmopy/osmo_interact #19 0.961 copying osmopy/osmo_interact/vty.py -> build/lib/osmopy/osmo_interact #19 0.961 copying osmopy/osmo_interact/ctrl.py -> build/lib/osmopy/osmo_interact #19 0.961 copying osmopy/osmo_interact/common.py -> build/lib/osmopy/osmo_interact #19 0.961 running build_scripts #19 0.965 creating build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmodumpdoc.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmotestvty.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmotestconfig.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmo_ctrl.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmo_rate_ctr2csv.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmo_trap2cgi.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmo_interact_vty.py -> build/scripts-3.13 #19 0.965 copying and adjusting scripts/osmo_interact_ctrl.py -> build/scripts-3.13 #19 0.966 copying and adjusting scripts/osmo_verify_transcript_vty.py -> build/scripts-3.13 #19 0.966 copying and adjusting scripts/osmo_verify_transcript_ctrl.py -> build/scripts-3.13 #19 0.966 changing mode of build/scripts-3.13/osmodumpdoc.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmotestvty.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmotestconfig.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_ctrl.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_rate_ctr2csv.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_trap2cgi.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_interact_vty.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_interact_ctrl.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_verify_transcript_vty.py from 644 to 755 #19 0.966 changing mode of build/scripts-3.13/osmo_verify_transcript_ctrl.py from 644 to 755 #19 0.966 running install #19 0.966 /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:90: SetuptoolsDeprecationWarning: setup.py install is deprecated. #19 0.966 !! #19 0.966 #19 0.966 ******************************************************************************** #19 0.966 Please avoid running ``setup.py`` directly. #19 0.966 Instead, use pypa/build, pypa/installer or other #19 0.966 standards-based tools. #19 0.966 #19 0.966 See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. #19 0.966 ******************************************************************************** #19 0.966 #19 0.966 !! #19 0.966 self.initialize_options() #19 0.995 /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:90: EasyInstallDeprecationWarning: easy_install command is deprecated. #19 0.995 !! #19 0.995 #19 0.995 ******************************************************************************** #19 0.995 Please avoid running ``setup.py`` and ``easy_install``. #19 0.995 Instead, use pypa/build, pypa/installer or other #19 0.995 standards-based tools. #19 0.995 #19 0.995 See https://github.com/pypa/setuptools/issues/917 for details. #19 0.995 ******************************************************************************** #19 0.995 #19 0.995 !! #19 0.995 self.initialize_options() #19 1.019 running bdist_egg #19 1.026 running egg_info #19 1.030 creating osmopython.egg-info #19 1.030 writing osmopython.egg-info/PKG-INFO #19 1.030 writing dependency_links to osmopython.egg-info/dependency_links.txt #19 1.030 writing top-level names to osmopython.egg-info/top_level.txt #19 1.030 writing manifest file 'osmopython.egg-info/SOURCES.txt' #19 1.034 reading manifest file 'osmopython.egg-info/SOURCES.txt' #19 1.035 writing manifest file 'osmopython.egg-info/SOURCES.txt' #19 1.035 installing library code to build/bdist.linux-x86_64/egg #19 1.035 running install_lib #19 1.035 creating build/bdist.linux-x86_64/egg #19 1.035 creating build/bdist.linux-x86_64/egg/osmopy #19 1.035 copying build/lib/osmopy/__init__.py -> build/bdist.linux-x86_64/egg/osmopy #19 1.035 copying build/lib/osmopy/osmoutil.py -> build/bdist.linux-x86_64/egg/osmopy #19 1.035 copying build/lib/osmopy/obscvty.py -> build/bdist.linux-x86_64/egg/osmopy #19 1.035 copying build/lib/osmopy/trap_helper.py -> build/bdist.linux-x86_64/egg/osmopy #19 1.035 copying build/lib/osmopy/osmo_ipa.py -> build/bdist.linux-x86_64/egg/osmopy #19 1.035 creating build/bdist.linux-x86_64/egg/osmopy/osmo_interact #19 1.035 copying build/lib/osmopy/osmo_interact/__init__.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact #19 1.035 copying build/lib/osmopy/osmo_interact/vty.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact #19 1.035 copying build/lib/osmopy/osmo_interact/ctrl.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact #19 1.035 copying build/lib/osmopy/osmo_interact/common.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact #19 1.036 byte-compiling build/bdist.linux-x86_64/egg/osmopy/__init__.py to __init__.cpython-313.pyc #19 1.036 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmoutil.py to osmoutil.cpython-313.pyc #19 1.036 byte-compiling build/bdist.linux-x86_64/egg/osmopy/obscvty.py to obscvty.cpython-313.pyc #19 1.037 byte-compiling build/bdist.linux-x86_64/egg/osmopy/trap_helper.py to trap_helper.cpython-313.pyc #19 1.038 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_ipa.py to osmo_ipa.cpython-313.pyc #19 1.039 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/__init__.py to __init__.cpython-313.pyc #19 1.039 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/vty.py to vty.cpython-313.pyc #19 1.040 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/ctrl.py to ctrl.cpython-313.pyc #19 1.041 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/common.py to common.cpython-313.pyc #19 1.042 creating build/bdist.linux-x86_64/egg/EGG-INFO #19 1.042 installing scripts to build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 running install_scripts #19 1.043 creating build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_trap2cgi.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_verify_transcript_ctrl.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_verify_transcript_vty.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmodumpdoc.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_interact_ctrl.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmotestconfig.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_interact_vty.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_ctrl.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmotestvty.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 copying build/scripts-3.13/osmo_rate_ctr2csv.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_trap2cgi.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_verify_transcript_ctrl.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_verify_transcript_vty.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmodumpdoc.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_interact_ctrl.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmotestconfig.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_interact_vty.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_ctrl.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmotestvty.py to 755 #19 1.043 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_rate_ctr2csv.py to 755 #19 1.043 copying osmopython.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO #19 1.043 copying osmopython.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO #19 1.043 copying osmopython.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO #19 1.043 copying osmopython.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO #19 1.043 zip_safe flag not set; analyzing archive contents... #19 1.044 osmopy.__pycache__.trap_helper.cpython-313: module references __file__ #19 1.045 creating dist #19 1.045 creating 'dist/osmopython-0.3.0-py3.13.egg' and adding 'build/bdist.linux-x86_64/egg' to it #19 1.049 removing 'build/bdist.linux-x86_64/egg' (and everything under it) #19 1.050 Processing osmopython-0.3.0-py3.13.egg #19 1.050 creating /usr/local/lib/python3.13/dist-packages/osmopython-0.3.0-py3.13.egg #19 1.050 Extracting osmopython-0.3.0-py3.13.egg to /usr/local/lib/python3.13/dist-packages #19 1.059 Adding osmopython 0.3.0 to easy-install.pth file #19 1.060 Installing osmo_trap2cgi.py script to /usr/local/bin #19 1.060 Installing osmo_verify_transcript_ctrl.py script to /usr/local/bin #19 1.060 Installing osmo_verify_transcript_vty.py script to /usr/local/bin #19 1.061 Installing osmodumpdoc.py script to /usr/local/bin #19 1.061 Installing osmo_interact_ctrl.py script to /usr/local/bin #19 1.061 Installing osmotestconfig.py script to /usr/local/bin #19 1.061 Installing osmo_interact_vty.py script to /usr/local/bin #19 1.061 Installing osmo_ctrl.py script to /usr/local/bin #19 1.061 Installing osmotestvty.py script to /usr/local/bin #19 1.062 Installing osmo_rate_ctr2csv.py script to /usr/local/bin #19 1.062 #19 1.062 Installed /usr/local/lib/python3.13/dist-packages/osmopython-0.3.0-py3.13.egg #19 1.062 Processing dependencies for osmopython==0.3.0 #19 1.062 Finished processing dependencies for osmopython==0.3.0 #19 1.077 + cd .. #19 1.077 + rm -rf osmo-python-tests #19 DONE 1.2s #20 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #20 DONE 0.5s #21 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #21 0.648 + git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci #21 0.649 Cloning into 'osmo-ci'... #21 0.810 + su build -c cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin #21 0.817 'cat-testlogs.sh' -> '/usr/local/bin/cat-testlogs.sh' #21 0.817 'common.sh' -> '/usr/local/bin/common.sh' #21 0.817 'docker-cleanup.sh' -> '/usr/local/bin/docker-cleanup.sh' #21 0.817 'osmo-build-dep.sh' -> '/usr/local/bin/osmo-build-dep.sh' #21 0.817 'osmo-ci-docker-rebuild.sh' -> '/usr/local/bin/osmo-ci-docker-rebuild.sh' #21 0.817 'osmo-clean-workspace.sh' -> '/usr/local/bin/osmo-clean-workspace.sh' #21 0.817 'osmo-deps.sh' -> '/usr/local/bin/osmo-deps.sh' #21 0.817 'osmo-layer1-headers.sh' -> '/usr/local/bin/osmo-layer1-headers.sh' #21 0.817 'osmocom-api-doxygen.sh' -> '/usr/local/bin/osmocom-api-doxygen.sh' #21 0.817 'osmocom-build-old-tags-against-master.sh' -> '/usr/local/bin/osmocom-build-old-tags-against-master.sh' #21 0.817 'osmocom-list-commits.sh' -> '/usr/local/bin/osmocom-list-commits.sh' #21 0.817 'osmocom-obs-link.sh' -> '/usr/local/bin/osmocom-obs-link.sh' #21 0.817 'osmocom-packages-docker.sh' -> '/usr/local/bin/osmocom-packages-docker.sh' #21 0.817 'reminder-extend-obs-key.sh' -> '/usr/local/bin/reminder-extend-obs-key.sh' #21 0.817 'repo-install-test.sh' -> '/usr/local/bin/repo-install-test.sh' #21 0.817 'verify_endian_header.sh' -> '/usr/local/bin/verify_endian_header.sh' #21 0.817 'wrapper_core_bt_on_error.sh' -> '/usr/local/bin/wrapper_core_bt_on_error.sh' #21 0.817 'xgoldmon-jenkins.sh' -> '/usr/local/bin/xgoldmon-jenkins.sh' #21 0.817 'verify_log_statements.py' -> '/usr/local/bin/verify_log_statements.py' #21 0.817 'verify_value_string_arrays_are_terminated.py' -> '/usr/local/bin/verify_value_string_arrays_are_terminated.py' #21 0.817 + rm -rf osmo-ci #21 DONE 1.0s #22 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT=TEXT /tmp/osmo-gsm-manuals-commit #22 DONE 0.4s #23 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #23 0.694 Cloning into 'osmo-gsm-manuals'... #23 DONE 1.0s #24 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_13//RELEASE /tmp/Release #24 DONE 0.3s #25 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends -t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' sdcc && apt-get clean #25 0.689 + echo deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./ #25 0.689 + apt-get update #25 0.713 Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease [1579 B] #25 0.717 Hit:2 http://deb.debian.org/debian trixie InRelease #25 0.752 Err:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease #25 0.752 Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6B2A9F3792D15EB70D4E6A8F86A730B653725973 is not bound: No binding signature at time 2025-10-22T06:32:43Z because: No binding signature at time 2025-10-22T06:32:43Z #25 0.752 Hit:3 http://deb.debian.org/debian trixie-updates InRelease #25 0.752 Get:4 http://deb.debian.org/debian-security trixie-security InRelease [43.4 kB] #25 0.785 Reading package lists... #25 1.095 W: OpenPGP signature verification failed: https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6B2A9F3792D15EB70D4E6A8F86A730B653725973 is not bound: No binding signature at time 2025-10-22T06:32:43Z because: No binding signature at time 2025-10-22T06:32:43Z #25 1.095 E: The repository 'https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease' is not signed. #25 ERROR: process "/bin/sh -c set -x && \techo \"deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./\" \t\t> /etc/apt/sources.list.d/osmocom-nightly.list && \tapt-get update && \tapt-get install -y --no-install-recommends \t\t-t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' \t\tsdcc \t\t&& \tapt-get clean" did not complete successfully: exit code: 100 ------
[16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends -t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' sdcc && apt-get clean: 0.689 + echo deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./ 0.689 + apt-get update
1.095 W: OpenPGP signature verification failed: https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6B2A9F3792D15EB70D4E6A8F86A730B653725973 is not bound: No binding signature at time 2025-10-22T06:32:43Z because: No binding signature at time 2025-10-22T06:32:43Z 1.095 E: The repository 'https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease' is not signed. ------ Dockerfile:227 -------------------- 226 | ADD $OSMOCOM_REPO/Release /tmp/Release 227 | >>> RUN set -x && \ 228 | >>> echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./" \ 229 | >>> > /etc/apt/sources.list.d/osmocom-nightly.list && \ 230 | >>> apt-get update && \ 231 | >>> apt-get install -y --no-install-recommends \ 232 | >>> -t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' \ 233 | >>> sdcc \ 234 | >>> && \ 235 | >>> apt-get clean 236 | -------------------- ERROR: failed to solve: process "/bin/sh -c set -x && \techo \"deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./\" \t\t> /etc/apt/sources.list.d/osmocom-nightly.list && \tapt-get update && \tapt-get install -y --no-install-recommends \t\t-t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' \t\tsdcc \t\t&& \tapt-get clean" did not complete successfully: exit code: 100 make: *** [../make/Makefile:96: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/ws/_docker_playground/debian-trixie-build'> + exit 1 Build step 'Execute shell' marked build as failure
See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/3113/display/redirect> Changes: ------------------------------------------ [...truncated 21.52 KiB...] #4 [1/9] FROM docker.io/library/debian:bookworm@sha256:26f2a7cab45014541c65f9d140ccfa6aaefbb49686c6759bea9c6f7f5bb3d72f #4 DONE 0.0s #5 [6/9] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/LATEST/DEBIAN_12//RELEASE /tmp/Release #5 DONE 0.1s #6 [internal] load build context #6 transferring context: 1.50kB done #6 DONE 0.1s #7 [5/9] COPY .COMMON/RELEASE.KEY /usr/share/keyrings/osmocom-latest.asc #7 CACHED #8 [4/9] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends libnftables-dev libpcap-dev libsctp1 && apt-get clean #8 CACHED #9 [7/9] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates gnupg && apt-get clean && echo "deb [signed-by=/usr/share/keyrings/osmocom-latest.asc] https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-latest.list #9 CACHED #10 [3/9] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends build-essential git iproute2 netcat-openbsd procps tcpdump vim wget && apt-get clean #10 CACHED #11 [6/9] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/LATEST/DEBIAN_12//RELEASE /tmp/Release #11 CACHED #12 [8/9] RUN USERADD --uid=1000 -m build #12 CACHED #13 [2/9] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends erlang rebar rebar3 && apt-get clean #13 CACHED #14 [9/9] WORKDIR /HOME/BUILD #14 CACHED #15 exporting to image #15 exporting layers done #15 writing image sha256:f0bd1e4955b7e43196e0dd45631cb0d0f5b2dc29478293c1b09c079d2d48a6de 0.0s done #15 naming to docker.io/osmocom-build/debian-bookworm-erlang:latest 0.0s done #15 DONE 0.1s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/ws/_docker_playground/debian-bookworm-erlang'> + docker_image_exists debian-bookworm-erlang + docker images -q osmocom-build/debian-bookworm-erlang + test -n f0bd1e4955b7 + list_osmo_packages debian-bookworm debian-bookworm-erlang + local distro=debian-bookworm + local image=debian-bookworm-erlang + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-erlang -c + [ -n ] + return + [ = registry.osmocom.org ] + docker_depends debian-trixie-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-trixie-build + echo debian-trixie + distro_arg=debian-trixie + [ -z ] + docker_upstream_distro_from_image_name debian-trixie-build + echo debian:trixie + upstream_distro_arg=debian:trixie + docker_dir_from_image_name debian-trixie-build + echo debian-trixie-build + dir=debian-trixie-build + [ -z ] + pull_arg=--pull + grep ^FROM ../debian-trixie-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-trixie-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-trixie-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:trixie DISTRO=debian-trixie IMAGE=osmocom-build/debian-trixie-build OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/ws/_docker_playground/debian-trixie-build'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/ws/_docker_playground/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:trixie \ --build-arg DISTRO=debian-trixie \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_S1GW_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ --pull -t osmocom-build/debian-trixie-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 6.39kB done #1 DONE 0.1s #2 [internal] load metadata for docker.io/library/debian:trixie #2 DONE 0.3s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.1s #4 [ 1/16] FROM docker.io/library/debian:trixie@sha256:72547dd722cd005a8c2aa2079af9ca0ee93aad8e589689135feaed60b0a8c08d #4 DONE 0.0s #5 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_13//RELEASE /tmp/Release #5 DONE 0.1s #6 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #6 DONE 0.2s #7 [internal] load build context #7 transferring context: 1.97kB done #7 DONE 0.3s #8 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTER?FORMAT=TEXT /tmp/osmo-python-tests-commit #8 ... #9 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #9 DONE 0.7s #8 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTER?FORMAT=TEXT /tmp/osmo-python-tests-commit #8 DONE 0.7s #10 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT=TEXT /tmp/osmo-gsm-manuals-commit #10 DONE 0.8s #11 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-trixie-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates wget && apt-get clean && wget -q http://ftp.de.debian.org/debian/pool/main/n/ncurses/libtinfo5_6.4-4_amd64.de... && dpkg -i "libtinfo5_6.4-4_amd64.deb" && rm "libtinfo5_6.4-4_amd64.deb" && wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/dow... && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #11 CACHED #12 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTER?FORMAT=TEXT /tmp/osmo-python-tests-commit #12 CACHED #13 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #13 CACHED #14 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #14 CACHED #15 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT=TEXT /tmp/osmo-gsm-manuals-commit #15 CACHED #16 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #16 CACHED #17 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #17 CACHED #18 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #18 CACHED #19 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache clang-format cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi gdb ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgcrypt20-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libidn-dev libjansson-dev liblimesuite-dev liblua5.3-dev libmnl-dev libmongoc-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnghttp2-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool libuhd-dev libulfius-dev liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libyaml-dev libzmq3-dev locales lua-socket make meson mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-pytest python3-setuptools python3-usb python3-yaml rsync source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc xxd && apt-get clean #19 CACHED #20 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #20 CACHED #21 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #21 CACHED #22 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #22 CACHED #23 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' 'git+https://github.com/podshumok/python-smpplib.git' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #23 CACHED #24 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_13//RELEASE /tmp/Release #24 CACHED #25 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends -t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' sdcc && apt-get clean #25 0.587 + echo deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./ #25 0.587 + apt-get update #25 0.642 Hit:1 http://deb.debian.org/debian trixie InRelease #25 0.642 Hit:2 http://deb.debian.org/debian trixie-updates InRelease #25 0.642 Get:3 http://deb.debian.org/debian-security trixie-security InRelease [43.4 kB] #25 0.737 Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease [1579 B] #25 0.740 Err:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease #25 0.740 Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6B2A9F3792D15EB70D4E6A8F86A730B653725973 is not bound: No binding signature at time 2025-10-22T06:32:43Z because: No binding signature at time 2025-10-22T06:32:43Z #25 0.744 Reading package lists... #25 1.092 W: OpenPGP signature verification failed: https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6B2A9F3792D15EB70D4E6A8F86A730B653725973 is not bound: No binding signature at time 2025-10-22T06:32:43Z because: No binding signature at time 2025-10-22T06:32:43Z #25 1.092 E: The repository 'https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease' is not signed. #25 ERROR: process "/bin/sh -c set -x && \techo \"deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./\" \t\t> /etc/apt/sources.list.d/osmocom-nightly.list && \tapt-get update && \tapt-get install -y --no-install-recommends \t\t-t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' \t\tsdcc \t\t&& \tapt-get clean" did not complete successfully: exit code: 100 ------
[16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends -t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' sdcc && apt-get clean: 0.587 + echo deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13/ ./ 0.587 + apt-get update 0.642 Hit:1 http://deb.debian.org/debian trixie InRelease 0.642 Hit:2 http://deb.debian.org/debian trixie-updates InRelease 0.642 Get:3 http://deb.debian.org/debian-security trixie-security InRelease [43.4 kB] 0.737 Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease [1579 B]
1.092 W: OpenPGP signature verification failed: https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on 6B2A9F3792D15EB70D4E6A8F86A730B653725973 is not bound: No binding signature at time 2025-10-22T06:32:43Z because: No binding signature at time 2025-10-22T06:32:43Z 1.092 E: The repository 'https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease' is not signed. ------ Dockerfile:227 -------------------- 226 | ADD $OSMOCOM_REPO/Release /tmp/Release 227 | >>> RUN set -x && \ 228 | >>> echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./" \ 229 | >>> > /etc/apt/sources.list.d/osmocom-nightly.list && \ 230 | >>> apt-get update && \ 231 | >>> apt-get install -y --no-install-recommends \ 232 | >>> -t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' \ 233 | >>> sdcc \ 234 | >>> && \ 235 | >>> apt-get clean 236 | -------------------- ERROR: failed to solve: process "/bin/sh -c set -x && \techo \"deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./\" \t\t> /etc/apt/sources.list.d/osmocom-nightly.list && \tapt-get update && \tapt-get install -y --no-install-recommends \t\t-t'o=obs://osmocom/osmocom:nightly/Debian_13,n=Debian_13,l=osmocom:nightly,c=' \t\tsdcc \t\t&& \tapt-get clean" did not complete successfully: exit code: 100 make: *** [../make/Makefile:96: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=build4-deb12build-ansible/ws/_docker_playground/debian-trixie-build'> + exit 1 Build step 'Execute shell' marked build as failure
participants (1)
-
jenkins＠lists.osmocom.org