See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9/8431/display/redirect?page=changes>
Changes:
[Oliver Smith] doc: osmux: use generated svg instead of pychart
------------------------------------------
[...truncated 563.96 KB...]
channel-description bs-ag-blks-res 1
no access-control-class-ramping
access-control-class-ramping-step-interval dynamic
access-control-class-ramping-step-size 1
early-classmark-sending forbidden
early-classmark-sending-3g allowed
ipa unit-id 1800 0
oml ipa stream-id 255 line 0
neighbor-list mode automatic
codec-support fr hr efr amr
amr tch-f modes 0 2 4 7
amr tch-f threshold ms 32 32 32
amr tch-f hysteresis ms 8 8 8
amr tch-f threshold bts 32 32 32
amr tch-f hysteresis bts 8 8 8
amr tch-f start-mode auto
amr tch-h modes 0 2 4
amr tch-h threshold ms 32 32
amr tch-h hysteresis ms 8 8
amr tch-h threshold bts 32 32
amr tch-h hysteresis bts 8 8
amr tch-h start-mode auto
gprs mode none
trx 0
rf_locked 0
arfcn 868
nominal power 23
max_power_red 0
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
hopping enabled 0
timeslot 1
phys_chan_config SDCCH8
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
msc 0
ip.access rtp-base 4000
no bsc-welcome-text
no bsc-msc-lost-text
no bsc-grace-text
codec-list hr3
type normal
allow-emergency deny
amr-config 12_2k forbidden
amr-config 10_2k forbidden
amr-config 7_95k forbidden
amr-config 7_40k forbidden
amr-config 6_70k forbidden
amr-config 5_90k allowed
amr-config 5_15k forbidden
amr-config 4_75k forbidden
amr-payload octet-aligned
asp-protocol m3ua
lcls-mode disabled
lcls-codec-mismatch forbidden
bsc
mid-call-timeout 0
no missing-msc-text
cbc
no remote-ip
no listen-port
end
[1;36m<0004> bsc_init.c:52 shutting down OML for BTS 0
[0;msignal 15 received
Terminating took 2.679s
RESULTS:
pass: ./handover_cfg.vty
pass: ./neighbor_ident.vty
pass: ./osmo-bsc.vty
make[6]: Leaving directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c'
'/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/12178/fd
total 0
lr-x------ 1 build build 64 Dec 6 13:27 0 -> pipe:[3016138066]
l-wx------ 1 build build 64 Dec 6 13:27 1 -> pipe:[3016138067]
l-wx------ 1 build build 64 Dec 6 13:27 2 -> pipe:[3016138068]
l-wx------ 1 build build 64 Dec 6 13:27 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local
Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local
Address:Port Peer Address:Port
ps xua | grep osmo
build 12178 0.0 0.0
53724 20744 ? S 13:27 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p
/build -w /build -v
build 12179 0.0 0.0 21474979752 23540 ? R 13:27 0:00 ./src/osmo-bsc/osmo-bsc
-c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 12186 0.0 0.0 4276 708 ? S 13:27 0:00 /bin/sh -c ps xua | grep
osmo
build 12188 0.0 0.0 4276 88 ? R 13:27 0:00 /bin/sh -c ps xua | grep
osmo
ERROR
test_terminal_length (__main__.TestVTY) ... Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5,
family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0,
laddr=('127.0.0.1', 36998), raddr=('127.0.0.1', 4242)> (1 sockets
open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET,
type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 36998),
raddr=('127.0.0.1', 4242)> (0 sockets open)
Terminating took 2.679s
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c'
'/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/12178/fd
total 0
lr-x------ 1 build build 64 Dec 6 13:27 0 -> pipe:[3016138066]
l-wx------ 1 build build 64 Dec 6 13:27 1 -> pipe:[3016138067]
l-wx------ 1 build build 64 Dec 6 13:27 2 -> pipe:[3016138068]
l-wx------ 1 build build 64 Dec 6 13:27 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local
Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local
Address:Port Peer Address:Port
ps xua | grep osmo
build 12178 3.5 0.0
53980 20928 ? S 13:27 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p
/build -w /build -v
build 12190 0.0 0.0 21474979732 22024 ? R 13:27 0:00 ./src/osmo-bsc/osmo-bsc
-c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 12197 0.0 0.0 4276 796 ? S 13:27 0:00 /bin/sh -c ps xua | grep
osmo
build 12199 0.0 0.0 12780 1016 ? S 13:27 0:00 grep osmo
ERROR
test_unknown_command (__main__.TestVTY) ... Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5,
family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0,
laddr=('127.0.0.1', 37012), raddr=('127.0.0.1', 4242)> (1 sockets
open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET,
type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 37012),
raddr=('127.0.0.1', 4242)> (0 sockets open)
Terminating took 2.679s
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c'
'/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
ls -l /proc/12178/fd
total 0
lr-x------ 1 build build 64 Dec 6 13:27 0 -> pipe:[3016138066]
l-wx------ 1 build build 64 Dec 6 13:27 1 -> pipe:[3016138067]
l-wx------ 1 build build 64 Dec 6 13:27 2 -> pipe:[3016138068]
l-wx------ 1 build build 64 Dec 6 13:27 3 -> /dev/null
ss -tn
State Recv-Q Send-Q Local
Address:Port Peer Address:Port
ss -tln
State Recv-Q Send-Q Local
Address:Port Peer Address:Port
ps xua | grep osmo
build 12178 2.1 0.0
53980 20932 ? S 13:27 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p
/build -w /build -v
build 12201 0.0 0.0 21474979208 20188 ? R 13:27 0:00 ./src/osmo-bsc/osmo-bsc
-c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 12208 0.0 0.0 4276 736 ? S 13:27 0:00 /bin/sh -c ps xua | grep
osmo
build 12210 0.0 0.0 4276 88 ? R 13:27 0:00 /bin/sh -c ps xua | grep
osmo
Connecting socket failed, retrying...
Socket: in 2 tries, connected to 127.0.0.1:4242 <socket.socket fd=5,
family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0,
laddr=('127.0.0.1', 37034), raddr=('127.0.0.1', 4242)> (1 sockets
open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=5, family=AddressFamily.AF_INET,
type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 37034),
raddr=('127.0.0.1', 4242)> (0 sockets open)
Terminating took 2.679s
ERROR
======================================================================
ERROR: test_history (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py",
line 55, in test_history
self.vty.command(t1)
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 222, in command
return self._common_command(request, close)
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 178, in _common_command
self.socket.send("%s\r" % request)
TypeError: a bytes-like object is required, not 'str'
======================================================================
ERROR: test_terminal_length (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py",
line 65, in test_terminal_length
assert(self.vty.verify(test_str, ['']))
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 244, in verify
res = self.command(command, close).split('\r\n')
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 222, in command
return self._common_command(request, close)
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 178, in _common_command
self.socket.send("%s\r" % request)
TypeError: a bytes-like object is required, not 'str'
======================================================================
ERROR: test_unknown_command (__main__.TestVTY)
----------------------------------------------------------------------
Traceback (most recent call last):
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/EGG-INFO/scripts/osmotestvty.py",
line 61, in test_unknown_command
assert(self.vty.verify(test_str, ['% Unknown command.']))
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 244, in verify
res = self.command(command, close).split('\r\n')
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 222, in command
return self._common_command(request, close)
File
"/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/obscvty.py",
line 178, in _common_command
self.socket.send("%s\r" % request)
TypeError: a bytes-like object is required, not 'str'
----------------------------------------------------------------------
Ran 3 tests in 10.556s
FAILED (errors=3)
Makefile:698: recipe for target 'python-tests' failed
make[5]: Leaving directory '/build/tests'
make[5]: *** [python-tests] Error 3
make[4]: *** [check-local] Error 2
Makefile:717: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
Makefile:558: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
make[2]: *** [check-recursive] Error 1
Makefile:410: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[1]: *** [check-recursive] Error 1
Makefile:448: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:739: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE