See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/71/display/redirect> ------------------------------------------ [...truncated 156.92 KB...] config.status: executing depfiles commands config.status: executing libtool commands + fix_repo libusrp + make dist-bzip2 if test -d "libusrp-3.4.3"; then find "libusrp-3.4.3" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.3" || { sleep 5 && rm -rf "libusrp-3.4.3"; }; else :; fi test -d "libusrp-3.4.3" || mkdir "libusrp-3.4.3" (cd host && make top_distdir=../libusrp-3.4.3 distdir=../libusrp-3.4.3/host \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[1]: Entering directory '/osmo-ci/_temp/repos/libusrp/host' (cd misc && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/host/misc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/host/misc' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host/misc' (cd lib && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/host/lib \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/host/lib' mkdir -p .deps PYTHONPATH=../../usrp/src srcdir=. /usr/bin/python ./gen_usrp_dbid.py ./usrp_dbid.dat make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host/lib' (cd include && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/host/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/host/include' (cd usrp && make top_distdir=../../../libusrp-3.4.3 distdir=../../../libusrp-3.4.3/host/include/usrp \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/osmo-ci/_temp/repos/libusrp/host/include/usrp' make[3]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host/include/usrp' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host/include' (cd apps && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/host/apps \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/host/apps' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host/apps' (cd swig && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/host/swig \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/host/swig' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host/swig' make[1]: Leaving directory '/osmo-ci/_temp/repos/libusrp/host' (cd fpga && make top_distdir=../libusrp-3.4.3 distdir=../libusrp-3.4.3/fpga \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[1]: Entering directory '/osmo-ci/_temp/repos/libusrp/fpga' (cd rbf && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/fpga/rbf \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/fpga/rbf' (cd rev2 && make top_distdir=../../../libusrp-3.4.3 distdir=../../../libusrp-3.4.3/fpga/rbf/rev2 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/osmo-ci/_temp/repos/libusrp/fpga/rbf/rev2' make[3]: Leaving directory '/osmo-ci/_temp/repos/libusrp/fpga/rbf/rev2' (cd rev4 && make top_distdir=../../../libusrp-3.4.3 distdir=../../../libusrp-3.4.3/fpga/rbf/rev4 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/osmo-ci/_temp/repos/libusrp/fpga/rbf/rev4' make[3]: Leaving directory '/osmo-ci/_temp/repos/libusrp/fpga/rbf/rev4' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/fpga/rbf' make[1]: Leaving directory '/osmo-ci/_temp/repos/libusrp/fpga' (cd doc && make top_distdir=../libusrp-3.4.3 distdir=../libusrp-3.4.3/doc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[1]: Entering directory '/osmo-ci/_temp/repos/libusrp/doc' (cd other && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/doc/other \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/doc/other' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/doc/other' make[1]: Leaving directory '/osmo-ci/_temp/repos/libusrp/doc' (cd firmware && make top_distdir=../libusrp-3.4.3 distdir=../libusrp-3.4.3/firmware \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[1]: Entering directory '/osmo-ci/_temp/repos/libusrp/firmware' (cd include && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/firmware/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/firmware/include' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/firmware/include' (cd lib && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/firmware/lib \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/firmware/lib' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/firmware/lib' (cd src && make top_distdir=../../libusrp-3.4.3 distdir=../../libusrp-3.4.3/firmware/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/osmo-ci/_temp/repos/libusrp/firmware/src' (cd common && make top_distdir=../../../libusrp-3.4.3 distdir=../../../libusrp-3.4.3/firmware/src/common \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/osmo-ci/_temp/repos/libusrp/firmware/src/common' make[3]: Leaving directory '/osmo-ci/_temp/repos/libusrp/firmware/src/common' (cd usrp2 && make top_distdir=../../../libusrp-3.4.3 distdir=../../../libusrp-3.4.3/firmware/src/usrp2 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/osmo-ci/_temp/repos/libusrp/firmware/src/usrp2' srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h make[3]: Leaving directory '/osmo-ci/_temp/repos/libusrp/firmware/src/usrp2' make[2]: Leaving directory '/osmo-ci/_temp/repos/libusrp/firmware/src' make[1]: Leaving directory '/osmo-ci/_temp/repos/libusrp/firmware' test -n "" \ || find "libusrp-3.4.3" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /osmo-ci/_temp/repos/libusrp/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "libusrp-3.4.3" tardir=libusrp-3.4.3 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >libusrp-3.4.3.tar.bz2 if test -d "libusrp-3.4.3"; then find "libusrp-3.4.3" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libusrp-3.4.3" || { sleep 5 && rm -rf "libusrp-3.4.3"; }; else :; fi + set +x osmo-bsc osmo-bsc-1.0.1.tar.bz2 (ignored) osmo-bsc-1.1.0.tar.bz2 (ignored) osmo-bsc-1.1.1.tar.bz2 (ignored) osmo-bsc-1.1.2.tar.bz2 (ignored) osmo-bsc-1.2.0.tar.bz2 (ignored) osmo-bsc-1.2.1.tar.bz2 (ignored) osmo-bsc-1.2.2.tar.bz2 (ignored) osmo-bsc-1.3.0.tar.bz2 (exists) osmo-bsc-1.4.0.tar.bz2 (exists) osmo-bsc-1.4.1.tar.bz2 (exists) osmo-bsc-1.5.0.tar.bz2 (creating) + prepare_repo osmo-bsc 1.5.0 + local repo=osmo-bsc + local tag=1.5.0 + [ -d /osmo-ci/_temp/repos/osmo-bsc ] + git -C /osmo-ci/_temp/repos clone https://git.osmocom.org/osmo-bsc Cloning into 'osmo-bsc'... + cd /osmo-ci/_temp/repos/osmo-bsc + git clean -qdxf + git reset --hard HEAD HEAD is now at 3c9485751 Bump version: 1.4.0.109-caec1-dirty → 1.5.0 + git checkout -q 1.5.0 + prepare_depends osmo-bsc + cd /osmo-ci/_temp/repos/osmo-bsc + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. configure.ac:21: installing './compile' configure.ac:23: installing './config.guess' configure.ac:23: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' doc/Makefile.am:30: warning: '%'-style pattern rules are a GNU make extension doc/Makefile.am:33: warning: '%'-style pattern rules are a GNU make extension src/ipaccess/Makefile.am:57: warning: source file '$(top_srcdir)/src/osmo-bsc/gsm_data.c' is in a subdirectory, src/ipaccess/Makefile.am:57: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/ipaccess/Makefile.am: installing './depcomp' + ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing dlopen... -ldl checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOGSM... yes checking for LIBOSMOABIS... yes checking for LIBOSMONETIF... no configure: error: Package requirements (libosmo-netif >= 0.6.0) were not met: Requested 'libosmo-netif >= 0.6.0' but version of Osmocom network interface library is 0.5.0 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMONETIF_CFLAGS and LIBOSMONETIF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure