See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26447/display/redirect>
Changes:
------------------------------------------
[...truncated 683.09 KB...]
10: msc_vlr_test_hlr_timeout FAILED (testsuite.at:73)
11: msc_vlr_test_ms_timeout FAILED (testsuite.at:80)
12: msc_vlr_test_reject_concurrency FAILED (testsuite.at:87)
13: msc_vlr_test_call FAILED (testsuite.at:94)
14: msc_vlr_test_rest FAILED (testsuite.at:101)
15: msc_vlr_test_ss FAILED (testsuite.at:108)
16: sdp_msg_test ok
17: mncc_test ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 17 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.7.0.26-35ff] testsuite: 4 5 6 7 8 9 10 11 12 13 14 15 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:763: recipe for target 'check-local' failed
make[4]: *** [check-local] Error 1
make[4]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:569: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
Makefile:421: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:469: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:760: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:34: testing msc_vlr_test_gsm_authen ...
./testsuite.at:38: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2021-09-14 07:11:08.133429782 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2021-09-14 07:11:08.157430167 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_gsm_authen
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
5. testsuite.at:34: 5. msc_vlr_test_gsm_authen (testsuite.at:34): FAILED
(testsuite.at:38)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:69: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:73: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2021-09-14 07:11:08.349433244 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2021-09-14 07:11:08.361433437 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_timeout_lu_auth_info
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
10. testsuite.at:69: 10. msc_vlr_test_hlr_timeout (testsuite.at:69): FAILED
(testsuite.at:73)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:83: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:87: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2021-09-14 07:11:08.417434334 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2021-09-14 07:11:08.437434656 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_reject_2nd_conn
- Location Update Request on one connection
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
12. testsuite.at:83: 12. msc_vlr_test_reject_concurrency (testsuite.at:83): FAILED
(testsuite.at:87)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:41: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:45: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2021-09-14 07:11:08.177430488 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2021-09-14 07:11:08.205430936 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ciph
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
6. testsuite.at:41: 6. msc_vlr_test_gsm_ciph (testsuite.at:41): FAILED (testsuite.at:45)
======================== ./tests/testsuite.dir/15/testsuite.log
# -*- compilation -*-
15. testsuite.at:104: testing msc_vlr_test_ss ...
./testsuite.at:108: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2021-09-14 07:11:08.529436130 +0000
+++ /build/tests/testsuite.dir/at-groups/15/stderr 2021-09-14 07:11:08.549436451 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ss_ussd_mo_geran
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
15. testsuite.at:104: 15. msc_vlr_test_ss (testsuite.at:104): FAILED (testsuite.at:108)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:76: testing msc_vlr_test_ms_timeout ...
./testsuite.at:80: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2021-09-14 07:11:08.381433758 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2021-09-14 07:11:08.397434014 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ms_timeout_lu_auth_resp
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
11. testsuite.at:76: 11. msc_vlr_test_ms_timeout (testsuite.at:76): FAILED
(testsuite.at:80)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:27: testing msc_vlr_test_no_authen ...
./testsuite.at:31: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2021-09-14 07:11:08.093429141 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2021-09-14 07:11:08.117429526 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_no_authen
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
4. testsuite.at:27: 4. msc_vlr_test_no_authen (testsuite.at:27): FAILED (testsuite.at:31)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:48: testing msc_vlr_test_umts_authen ...
./testsuite.at:52: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2021-09-14 07:11:08.225431257 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2021-09-14 07:11:08.249431642 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
7. testsuite.at:48: 7. msc_vlr_test_umts_authen (testsuite.at:48): FAILED
(testsuite.at:52)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:90: testing msc_vlr_test_call ...
./testsuite.at:94: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2021-09-14 07:11:08.457434976 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2021-09-14 07:11:08.477435295 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_call_mo
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
13. testsuite.at:90: 13. msc_vlr_test_call (testsuite.at:90): FAILED (testsuite.at:94)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:55: testing msc_vlr_test_authen_reuse ...
./testsuite.at:59: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2021-09-14 07:11:08.265431898 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2021-09-14 07:11:08.289432284 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_auth_use_twice_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
8. testsuite.at:55: 8. msc_vlr_test_authen_reuse (testsuite.at:55): FAILED
(testsuite.at:59)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:97: testing msc_vlr_test_rest ...
./testsuite.at:101: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2021-09-14 07:11:08.497435616 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2021-09-14 07:11:08.513435874 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_cm_service_without_lu
- CM Service Request without a prior Location Updating
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
14. testsuite.at:97: 14. msc_vlr_test_rest (testsuite.at:97): FAILED (testsuite.at:101)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:62: testing msc_vlr_test_hlr_reject ...
./testsuite.at:66: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2021-09-14 07:11:08.309432604 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2021-09-14 07:11:08.329432923 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_rej_auth_info_unknown_imsi
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
9. testsuite.at:62: 9. msc_vlr_test_hlr_reject (testsuite.at:62): FAILED
(testsuite.at:66)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
Show replies by date
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26448/display/redirect>
Changes:
------------------------------------------
[...truncated 792.05 KB...]
10: msc_vlr_test_hlr_timeout FAILED (testsuite.at:73)
11: msc_vlr_test_ms_timeout FAILED (testsuite.at:80)
12: msc_vlr_test_reject_concurrency FAILED (testsuite.at:87)
13: msc_vlr_test_call FAILED (testsuite.at:94)
14: msc_vlr_test_rest FAILED (testsuite.at:101)
15: msc_vlr_test_ss FAILED (testsuite.at:108)
16: sdp_msg_test ok
17: mncc_test ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 17 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.7.0.26-35ff] testsuite: 4 5 6 7 8 9 10 11 12 13 14 15 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:763: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:569: recipe for target 'check-am' failed
make[3]: *** [check-am] Error 2
make[3]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:421: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
Makefile:469: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:760: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:34: testing msc_vlr_test_gsm_authen ...
./testsuite.at:38: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2021-09-14 08:36:28.331751816 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2021-09-14 08:36:28.355752217 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_gsm_authen
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
5. testsuite.at:34: 5. msc_vlr_test_gsm_authen (testsuite.at:34): FAILED
(testsuite.at:38)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:69: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:73: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2021-09-14 08:36:28.547755431 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2021-09-14 08:36:28.563755698 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_timeout_lu_auth_info
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
10. testsuite.at:69: 10. msc_vlr_test_hlr_timeout (testsuite.at:69): FAILED
(testsuite.at:73)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:83: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:87: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2021-09-14 08:36:28.619756635 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2021-09-14 08:36:28.647757104 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_reject_2nd_conn
- Location Update Request on one connection
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
12. testsuite.at:83: 12. msc_vlr_test_reject_concurrency (testsuite.at:83): FAILED
(testsuite.at:87)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:41: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:45: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2021-09-14 08:36:28.379752619 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2021-09-14 08:36:28.407753088 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ciph
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
6. testsuite.at:41: 6. msc_vlr_test_gsm_ciph (testsuite.at:41): FAILED (testsuite.at:45)
======================== ./tests/testsuite.dir/15/testsuite.log
# -*- compilation -*-
15. testsuite.at:104: testing msc_vlr_test_ss ...
./testsuite.at:108: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2021-09-14 08:36:28.739758644 +0000
+++ /build/tests/testsuite.dir/at-groups/15/stderr 2021-09-14 08:36:28.755758911 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ss_ussd_mo_geran
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
15. testsuite.at:104: 15. msc_vlr_test_ss (testsuite.at:104): FAILED (testsuite.at:108)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:76: testing msc_vlr_test_ms_timeout ...
./testsuite.at:80: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2021-09-14 08:36:28.583756033 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2021-09-14 08:36:28.603756368 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ms_timeout_lu_auth_resp
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
11. testsuite.at:76: 11. msc_vlr_test_ms_timeout (testsuite.at:76): FAILED
(testsuite.at:80)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:27: testing msc_vlr_test_no_authen ...
./testsuite.at:31: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2021-09-14 08:36:28.283751013 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2021-09-14 08:36:28.315751547 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_no_authen
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
4. testsuite.at:27: 4. msc_vlr_test_no_authen (testsuite.at:27): FAILED (testsuite.at:31)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:48: testing msc_vlr_test_umts_authen ...
./testsuite.at:52: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2021-09-14 08:36:28.423753355 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2021-09-14 08:36:28.447753757 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
7. testsuite.at:48: 7. msc_vlr_test_umts_authen (testsuite.at:48): FAILED
(testsuite.at:52)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:90: testing msc_vlr_test_call ...
./testsuite.at:94: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2021-09-14 08:36:28.663757372 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2021-09-14 08:36:28.687757774 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_call_mo
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
13. testsuite.at:90: 13. msc_vlr_test_call (testsuite.at:90): FAILED (testsuite.at:94)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:55: testing msc_vlr_test_authen_reuse ...
./testsuite.at:59: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2021-09-14 08:36:28.463754025 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2021-09-14 08:36:28.487754426 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_auth_use_twice_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
8. testsuite.at:55: 8. msc_vlr_test_authen_reuse (testsuite.at:55): FAILED
(testsuite.at:59)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:97: testing msc_vlr_test_rest ...
./testsuite.at:101: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2021-09-14 08:36:28.707758108 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2021-09-14 08:36:28.723758375 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_cm_service_without_lu
- CM Service Request without a prior Location Updating
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
14. testsuite.at:97: 14. msc_vlr_test_rest (testsuite.at:97): FAILED (testsuite.at:101)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:62: testing msc_vlr_test_hlr_reject ...
./testsuite.at:66: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2021-09-14 08:36:28.507754761 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2021-09-14 08:36:28.527755096 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_rej_auth_info_unknown_imsi
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
9. testsuite.at:62: 9. msc_vlr_test_hlr_reject (testsuite.at:62): FAILED
(testsuite.at:66)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26449/display/redirect>
Changes:
------------------------------------------
[...truncated 793.66 KB...]
10: msc_vlr_test_hlr_timeout FAILED (testsuite.at:73)
11: msc_vlr_test_ms_timeout FAILED (testsuite.at:80)
12: msc_vlr_test_reject_concurrency FAILED (testsuite.at:87)
13: msc_vlr_test_call FAILED (testsuite.at:94)
14: msc_vlr_test_rest FAILED (testsuite.at:101)
15: msc_vlr_test_ss FAILED (testsuite.at:108)
16: sdp_msg_test ok
17: mncc_test ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 17 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.7.0.26-35ff] testsuite: 4 5 6 7 8 9 10 11 12 13 14 15 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
make[4]: *** [check-local] Error 1
Makefile:763: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
Makefile:569: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:421: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:469: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:760: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:34: testing msc_vlr_test_gsm_authen ...
./testsuite.at:38: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2021-09-14 08:53:27.368935143 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2021-09-14 08:53:27.400935725 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_gsm_authen
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
5. testsuite.at:34: 5. msc_vlr_test_gsm_authen (testsuite.at:34): FAILED
(testsuite.at:38)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:69: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:73: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2021-09-14 08:53:27.624939799 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2021-09-14 08:53:27.640940091 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_timeout_lu_auth_info
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
10. testsuite.at:69: 10. msc_vlr_test_hlr_timeout (testsuite.at:69): FAILED
(testsuite.at:73)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:83: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:87: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2021-09-14 08:53:27.696941109 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2021-09-14 08:53:27.720941545 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_reject_2nd_conn
- Location Update Request on one connection
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
12. testsuite.at:83: 12. msc_vlr_test_reject_concurrency (testsuite.at:83): FAILED
(testsuite.at:87)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:41: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:45: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2021-09-14 08:53:27.424936161 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2021-09-14 08:53:27.452936671 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ciph
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
6. testsuite.at:41: 6. msc_vlr_test_gsm_ciph (testsuite.at:41): FAILED (testsuite.at:45)
======================== ./tests/testsuite.dir/15/testsuite.log
# -*- compilation -*-
15. testsuite.at:104: testing msc_vlr_test_ss ...
./testsuite.at:108: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2021-09-14 08:53:27.820943364 +0000
+++ /build/tests/testsuite.dir/at-groups/15/stderr 2021-09-14 08:53:27.836943656 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ss_ussd_mo_geran
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
15. testsuite.at:104: 15. msc_vlr_test_ss (testsuite.at:104): FAILED (testsuite.at:108)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:76: testing msc_vlr_test_ms_timeout ...
./testsuite.at:80: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2021-09-14 08:53:27.660940454 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2021-09-14 08:53:27.680940819 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ms_timeout_lu_auth_resp
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
11. testsuite.at:76: 11. msc_vlr_test_ms_timeout (testsuite.at:76): FAILED
(testsuite.at:80)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:27: testing msc_vlr_test_no_authen ...
./testsuite.at:31: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2021-09-14 08:53:27.316934198 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2021-09-14 08:53:27.348934780 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_no_authen
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
4. testsuite.at:27: 4. msc_vlr_test_no_authen (testsuite.at:27): FAILED (testsuite.at:31)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:48: testing msc_vlr_test_umts_authen ...
./testsuite.at:52: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2021-09-14 08:53:27.476937108 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2021-09-14 08:53:27.504937617 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
7. testsuite.at:48: 7. msc_vlr_test_umts_authen (testsuite.at:48): FAILED
(testsuite.at:52)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:90: testing msc_vlr_test_call ...
./testsuite.at:94: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2021-09-14 08:53:27.744941983 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2021-09-14 08:53:27.768942419 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_call_mo
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
13. testsuite.at:90: 13. msc_vlr_test_call (testsuite.at:90): FAILED (testsuite.at:94)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:55: testing msc_vlr_test_authen_reuse ...
./testsuite.at:59: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2021-09-14 08:53:27.524937980 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2021-09-14 08:53:27.556938562 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_auth_use_twice_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
8. testsuite.at:55: 8. msc_vlr_test_authen_reuse (testsuite.at:55): FAILED
(testsuite.at:59)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:97: testing msc_vlr_test_rest ...
./testsuite.at:101: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2021-09-14 08:53:27.788942782 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2021-09-14 08:53:27.800943001 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_cm_service_without_lu
- CM Service Request without a prior Location Updating
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
14. testsuite.at:97: 14. msc_vlr_test_rest (testsuite.at:97): FAILED (testsuite.at:101)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:62: testing msc_vlr_test_hlr_reject ...
./testsuite.at:66: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2021-09-14 08:53:27.580939000 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2021-09-14 08:53:27.604939436 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_rej_auth_info_unknown_imsi
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
9. testsuite.at:62: 9. msc_vlr_test_hlr_reject (testsuite.at:62): FAILED
(testsuite.at:66)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26450/display/redirect>
Changes:
------------------------------------------
[...truncated 685.00 KB...]
10: msc_vlr_test_hlr_timeout FAILED (testsuite.at:73)
11: msc_vlr_test_ms_timeout FAILED (testsuite.at:80)
12: msc_vlr_test_reject_concurrency FAILED (testsuite.at:87)
13: msc_vlr_test_call FAILED (testsuite.at:94)
14: msc_vlr_test_rest FAILED (testsuite.at:101)
15: msc_vlr_test_ss FAILED (testsuite.at:108)
16: sdp_msg_test ok
17: mncc_test ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 17 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.7.0.26-35ff] testsuite: 4 5 6 7 8 9 10 11 12 13 14 15 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
make[4]: *** [check-local] Error 1
Makefile:763: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
Makefile:569: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:421: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
make[1]: *** [check-recursive] Error 1
Makefile:469: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:760: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:34: testing msc_vlr_test_gsm_authen ...
./testsuite.at:38: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2021-09-14 08:59:25.487344116 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2021-09-14 08:59:25.511344540 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_gsm_authen
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
5. testsuite.at:34: 5. msc_vlr_test_gsm_authen (testsuite.at:34): FAILED
(testsuite.at:38)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:69: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:73: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2021-09-14 08:59:25.711348072 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2021-09-14 08:59:25.727348355 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_timeout_lu_auth_info
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
10. testsuite.at:69: 10. msc_vlr_test_hlr_timeout (testsuite.at:69): FAILED
(testsuite.at:73)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:83: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:87: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2021-09-14 08:59:25.779349274 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2021-09-14 08:59:25.799349627 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_reject_2nd_conn
- Location Update Request on one connection
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
12. testsuite.at:83: 12. msc_vlr_test_reject_concurrency (testsuite.at:83): FAILED
(testsuite.at:87)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:41: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:45: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2021-09-14 08:59:25.535344964 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2021-09-14 08:59:25.563345459 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ciph
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
6. testsuite.at:41: 6. msc_vlr_test_gsm_ciph (testsuite.at:41): FAILED (testsuite.at:45)
======================== ./tests/testsuite.dir/15/testsuite.log
# -*- compilation -*-
15. testsuite.at:104: testing msc_vlr_test_ss ...
./testsuite.at:108: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2021-09-14 08:59:25.895351323 +0000
+++ /build/tests/testsuite.dir/at-groups/15/stderr 2021-09-14 08:59:25.911351606 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ss_ussd_mo_geran
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
15. testsuite.at:104: 15. msc_vlr_test_ss (testsuite.at:104): FAILED (testsuite.at:108)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:76: testing msc_vlr_test_ms_timeout ...
./testsuite.at:80: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2021-09-14 08:59:25.743348638 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2021-09-14 08:59:25.763348991 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ms_timeout_lu_auth_resp
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
11. testsuite.at:76: 11. msc_vlr_test_ms_timeout (testsuite.at:76): FAILED
(testsuite.at:80)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:27: testing msc_vlr_test_no_authen ...
./testsuite.at:31: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2021-09-14 08:59:25.439343267 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2021-09-14 08:59:25.463343692 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_no_authen
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
4. testsuite.at:27: 4. msc_vlr_test_no_authen (testsuite.at:27): FAILED (testsuite.at:31)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:48: testing msc_vlr_test_umts_authen ...
./testsuite.at:52: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2021-09-14 08:59:25.583345812 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2021-09-14 08:59:25.611346307 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
7. testsuite.at:48: 7. msc_vlr_test_umts_authen (testsuite.at:48): FAILED
(testsuite.at:52)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:90: testing msc_vlr_test_call ...
./testsuite.at:94: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2021-09-14 08:59:25.819349981 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2021-09-14 08:59:25.839350334 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_call_mo
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
13. testsuite.at:90: 13. msc_vlr_test_call (testsuite.at:90): FAILED (testsuite.at:94)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:55: testing msc_vlr_test_authen_reuse ...
./testsuite.at:59: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2021-09-14 08:59:25.631346660 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2021-09-14 08:59:25.655347083 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_auth_use_twice_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
8. testsuite.at:55: 8. msc_vlr_test_authen_reuse (testsuite.at:55): FAILED
(testsuite.at:59)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:97: testing msc_vlr_test_rest ...
./testsuite.at:101: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2021-09-14 08:59:25.859350687 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2021-09-14 08:59:25.875350970 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_cm_service_without_lu
- CM Service Request without a prior Location Updating
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
14. testsuite.at:97: 14. msc_vlr_test_rest (testsuite.at:97): FAILED (testsuite.at:101)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:62: testing msc_vlr_test_hlr_reject ...
./testsuite.at:66: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2021-09-14 08:59:25.671347366 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2021-09-14 08:59:25.691347719 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_rej_auth_info_unknown_imsi
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
9. testsuite.at:62: 9. msc_vlr_test_hlr_reject (testsuite.at:62): FAILED
(testsuite.at:66)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26451/display/redirect>
Changes:
------------------------------------------
[...truncated 685.61 KB...]
10: msc_vlr_test_hlr_timeout FAILED (testsuite.at:73)
11: msc_vlr_test_ms_timeout FAILED (testsuite.at:80)
12: msc_vlr_test_reject_concurrency FAILED (testsuite.at:87)
13: msc_vlr_test_call FAILED (testsuite.at:94)
14: msc_vlr_test_rest FAILED (testsuite.at:101)
15: msc_vlr_test_ss FAILED (testsuite.at:108)
16: sdp_msg_test ok
17: mncc_test ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 17 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.7.0.26-35ff] testsuite: 4 5 6 7 8 9 10 11 12 13 14 15 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:763: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:569: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
make[2]: *** [check-recursive] Error 1
Makefile:421: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
Makefile:469: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:760: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:83: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:87: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2021-09-14 08:59:43.853740455 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2021-09-14 08:59:43.869740519 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_reject_2nd_conn
- Location Update Request on one connection
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
12. testsuite.at:83: 12. msc_vlr_test_reject_concurrency (testsuite.at:83): FAILED
(testsuite.at:87)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:97: testing msc_vlr_test_rest ...
./testsuite.at:101: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2021-09-14 08:59:43.925740739 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2021-09-14 08:59:43.941740803 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_cm_service_without_lu
- CM Service Request without a prior Location Updating
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
14. testsuite.at:97: 14. msc_vlr_test_rest (testsuite.at:97): FAILED (testsuite.at:101)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:69: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:73: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2021-09-14 08:59:43.789740204 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2021-09-14 08:59:43.805740266 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_timeout_lu_auth_info
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
10. testsuite.at:69: 10. msc_vlr_test_hlr_timeout (testsuite.at:69): FAILED
(testsuite.at:73)
======================== ./tests/testsuite.dir/15/testsuite.log
# -*- compilation -*-
15. testsuite.at:104: testing msc_vlr_test_ss ...
./testsuite.at:108: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2021-09-14 08:59:43.961740882 +0000
+++ /build/tests/testsuite.dir/at-groups/15/stderr 2021-09-14 08:59:43.973740930 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ss_ussd_mo_geran
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
15. testsuite.at:104: 15. msc_vlr_test_ss (testsuite.at:104): FAILED (testsuite.at:108)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:34: testing msc_vlr_test_gsm_authen ...
./testsuite.at:38: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2021-09-14 08:59:43.581739383 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2021-09-14 08:59:43.605739478 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_gsm_authen
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
5. testsuite.at:34: 5. msc_vlr_test_gsm_authen (testsuite.at:34): FAILED
(testsuite.at:38)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:90: testing msc_vlr_test_call ...
./testsuite.at:94: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2021-09-14 08:59:43.889740597 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2021-09-14 08:59:43.909740677 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_call_mo
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
13. testsuite.at:90: 13. msc_vlr_test_call (testsuite.at:90): FAILED (testsuite.at:94)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:76: testing msc_vlr_test_ms_timeout ...
./testsuite.at:80: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2021-09-14 08:59:43.817740314 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2021-09-14 08:59:43.833740376 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ms_timeout_lu_auth_resp
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
11. testsuite.at:76: 11. msc_vlr_test_ms_timeout (testsuite.at:76): FAILED
(testsuite.at:80)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:27: testing msc_vlr_test_no_authen ...
./testsuite.at:31: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2021-09-14 08:59:43.541739225 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2021-09-14 08:59:43.565739319 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_no_authen
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
4. testsuite.at:27: 4. msc_vlr_test_no_authen (testsuite.at:27): FAILED (testsuite.at:31)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:48: testing msc_vlr_test_umts_authen ...
./testsuite.at:52: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2021-09-14 08:59:43.669739729 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2021-09-14 08:59:43.693739824 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
7. testsuite.at:48: 7. msc_vlr_test_umts_authen (testsuite.at:48): FAILED
(testsuite.at:52)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:55: testing msc_vlr_test_authen_reuse ...
./testsuite.at:59: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2021-09-14 08:59:43.713739903 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2021-09-14 08:59:43.737739998 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_auth_use_twice_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
8. testsuite.at:55: 8. msc_vlr_test_authen_reuse (testsuite.at:55): FAILED
(testsuite.at:59)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:41: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:45: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2021-09-14 08:59:43.625739555 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2021-09-14 08:59:43.649739651 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ciph
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
6. testsuite.at:41: 6. msc_vlr_test_gsm_ciph (testsuite.at:41): FAILED (testsuite.at:45)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:62: testing msc_vlr_test_hlr_reject ...
./testsuite.at:66: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2021-09-14 08:59:43.753740062 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2021-09-14 08:59:43.773740139 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_rej_auth_info_unknown_imsi
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
9. testsuite.at:62: 9. msc_vlr_test_hlr_reject (testsuite.at:62): FAILED
(testsuite.at:66)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26452/display/redirect>
Changes:
------------------------------------------
[...truncated 791.66 KB...]
10: msc_vlr_test_hlr_timeout FAILED (testsuite.at:73)
11: msc_vlr_test_ms_timeout FAILED (testsuite.at:80)
12: msc_vlr_test_reject_concurrency FAILED (testsuite.at:87)
13: msc_vlr_test_call FAILED (testsuite.at:94)
14: msc_vlr_test_rest FAILED (testsuite.at:101)
15: msc_vlr_test_ss FAILED (testsuite.at:108)
16: sdp_msg_test ok
17: mncc_test ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 17 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.7.0.26-35ff] testsuite: 4 5 6 7 8 9 10 11 12 13 14 15 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:763: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
make[3]: *** [check-am] Error 2
Makefile:569: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:421: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
Makefile:469: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:760: recipe for target 'check' failed
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:34: testing msc_vlr_test_gsm_authen ...
./testsuite.at:38: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2021-09-14 10:59:53.631051419 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2021-09-14 10:59:53.655051848 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_gsm_authen
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
5. testsuite.at:34: 5. msc_vlr_test_gsm_authen (testsuite.at:34): FAILED
(testsuite.at:38)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:69: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:73: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2021-09-14 10:59:53.875055788 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2021-09-14 10:59:53.891056075 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_timeout_lu_auth_info
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
10. testsuite.at:69: 10. msc_vlr_test_hlr_timeout (testsuite.at:69): FAILED
(testsuite.at:73)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:83: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:87: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2021-09-14 10:59:53.955057221 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2021-09-14 10:59:53.979057650 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_reject_2nd_conn
- Location Update Request on one connection
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
12. testsuite.at:83: 12. msc_vlr_test_reject_concurrency (testsuite.at:83): FAILED
(testsuite.at:87)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:41: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:45: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2021-09-14 10:59:53.679052279 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2021-09-14 10:59:53.711052851 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ciph
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
6. testsuite.at:41: 6. msc_vlr_test_gsm_ciph (testsuite.at:41): FAILED (testsuite.at:45)
======================== ./tests/testsuite.dir/15/testsuite.log
# -*- compilation -*-
15. testsuite.at:104: testing msc_vlr_test_ss ...
./testsuite.at:108: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2021-09-14 10:59:54.087059585 +0000
+++ /build/tests/testsuite.dir/at-groups/15/stderr 2021-09-14 10:59:54.103059872 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ss_ussd_mo_geran
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
15. testsuite.at:104: 15. msc_vlr_test_ss (testsuite.at:104): FAILED (testsuite.at:108)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:76: testing msc_vlr_test_ms_timeout ...
./testsuite.at:80: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2021-09-14 10:59:53.907056361 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2021-09-14 10:59:53.927056720 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_ms_timeout_lu_auth_resp
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
11. testsuite.at:76: 11. msc_vlr_test_ms_timeout (testsuite.at:76): FAILED
(testsuite.at:80)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:27: testing msc_vlr_test_no_authen ...
./testsuite.at:31: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2021-09-14 10:59:53.579050487 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2021-09-14 10:59:53.607050988 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_no_authen
- Location Update request causes a GSUP LU request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
4. testsuite.at:27: 4. msc_vlr_test_no_authen (testsuite.at:27): FAILED (testsuite.at:31)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:48: testing msc_vlr_test_umts_authen ...
./testsuite.at:52: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2021-09-14 10:59:53.731053209 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2021-09-14 10:59:53.759053711 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
7. testsuite.at:48: 7. msc_vlr_test_umts_authen (testsuite.at:48): FAILED
(testsuite.at:52)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:90: testing msc_vlr_test_call ...
./testsuite.at:94: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2021-09-14 10:59:54.007058152 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2021-09-14 10:59:54.035058653 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_call_mo
- Total time passed: 0.000000 s
- Location Update request causes a GSUP Send Auth Info request to HLR
13. testsuite.at:90: 13. msc_vlr_test_call (testsuite.at:90): FAILED (testsuite.at:94)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:55: testing msc_vlr_test_authen_reuse ...
./testsuite.at:59: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2021-09-14 10:59:53.779054069 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2021-09-14 10:59:53.807054571 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_auth_use_twice_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
8. testsuite.at:55: 8. msc_vlr_test_authen_reuse (testsuite.at:55): FAILED
(testsuite.at:59)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:97: testing msc_vlr_test_rest ...
./testsuite.at:101: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2021-09-14 10:59:54.051058940 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2021-09-14 10:59:54.067059227 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_cm_service_without_lu
- CM Service Request without a prior Location Updating
MSC <--GERAN-A-- MS: GSM48_MT_MM_CM_SERV_REQ
14. testsuite.at:97: 14. msc_vlr_test_rest (testsuite.at:97): FAILED (testsuite.at:101)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:62: testing msc_vlr_test_hlr_reject ...
./testsuite.at:66: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2021-09-14 10:59:53.831055000 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2021-09-14 10:59:53.851055358 +0000
@@ -1,4 +1,4 @@
-DLMGCP MGCP client: using endpoint domain '@mgw'
+DLMGCP MGW(mgw) MGCP client: using endpoint domain '@mgw'
===== test_hlr_rej_auth_info_unknown_imsi
- Location Update request causes a GSUP Send Auth Info request to HLR
MSC <--GERAN-A-- MS: GSM48_MT_MM_LOC_UPD_REQUEST
9. testsuite.at:62: 9. msc_vlr_test_hlr_reject (testsuite.at:62): FAILED
(testsuite.at:66)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/26453/display/redirect?page=changes>