fixeria has submitted this change. ( https://gerrit.osmocom.org/c/libosmo-gprs/+/34679?usp=email ) Change subject: tbf_ul_fsm: Avoid freeing tbf after 4 CV=0 retrans in acknowledged mode ...................................................................... tbf_ul_fsm: Avoid freeing tbf after 4 CV=0 retrans in acknowledged mode The restriction to only to transmit last data block (CV=0) up to 4 times only applies in Unacknowledged mode of operation, which we don't support. Hence, simply comment it out so that it can be enabled if unacknowledge mode is ever supported. Related: OS#6208 Change-Id: Ie7cdb286b9c7255e3fbf9f936f103fab04acf96a --- M src/rlcmac/tbf_ul_fsm.c M tests/rlcmac/rlcmac_prim_test.c M tests/rlcmac/rlcmac_prim_test.err M tests/rlcmac/rlcmac_prim_test.ok 4 files changed, 79 insertions(+), 99 deletions(-) Approvals: fixeria: Looks good to me, approved; Verified Jenkins Builder: Verified diff --git a/src/rlcmac/tbf_ul_fsm.c b/src/rlcmac/tbf_ul_fsm.c index 3c041a6..e5a2f9a 100644 --- a/src/rlcmac/tbf_ul_fsm.c +++ b/src/rlcmac/tbf_ul_fsm.c @@ -233,18 +233,22 @@ } break; case GPRS_RLCMAC_TBF_UL_EV_LAST_UL_DATA_SENT: - /* If LAST_UL_DATA_SENT is received in this state, it means the - * UL TBF is retransmitting the block. - * 9.3.3.3.2: The block with CV=0 shall not be retransmitted more than four times. - */ + /* If LAST_UL_DATA_SENT is received in this state, it means the UL TBF is retransmitting the block. */ ctx->last_data_block_retrans_attempts++; LOGPFSML(ctx->fi, LOGL_INFO, "Data block with CV=0 retransmit attempts=%u\n", ctx->last_data_block_retrans_attempts); arm_T3182_if_needed(ctx); + /* 9.3.2.4.2 (Acknowledged mode): When the mobile station has sent the RLC data block with CV = 0 and there are no + * elements in the V(B) array set to the value Nacked, it shall start timer T3182 for this TBF [...and ...] shall + * continue to send RLC data blocks on each assigned uplink data block */ +#if 0 + /* 9.3.3.3.2 (Unacknowledged mode): The block with CV=0 shall not be retransmitted more than four times. + * FIXME: Remove "if 0" when unacknowledged mode support is added. */ if (ctx->last_data_block_retrans_attempts == 4) { LOGPFSML(ctx->fi, LOGL_NOTICE, "TBF establishment failure (Data block with CV=0 retransmit attempts=%u)\n", ctx->last_data_block_retrans_attempts); gprs_rlcmac_ul_tbf_free(ctx->ul_tbf); } +#endif break; default: OSMO_ASSERT(0); diff --git a/tests/rlcmac/rlcmac_prim_test.c b/tests/rlcmac/rlcmac_prim_test.c index 35def30..046e7cc 100644 --- a/tests/rlcmac/rlcmac_prim_test.c +++ b/tests/rlcmac/rlcmac_prim_test.c @@ -826,7 +826,18 @@ cleanup_test(); } -static void test_ul_tbf_t3182_timeout(void) +/* 9.3.2.4.2 (acked mode): When the mobile station has sent the RLC data block + * with CV = 0 and there are no elements in the V(B) array set to the value + * Nacked, it shall start timer T3182 for this TBF. The mobile station shall + * continue to send RLC data blocks on each assigned uplink data block, + * according to the algorithm defined in sub-clause 9.1.3. + * 9.3.3.3.2 (unacked mode): Upon each retransmission of the last block with + * CV=0, the mobile station shall restart timer T3182 for the TBF. The block + * with CV=0 shall not be retransmitted more than four times. If the medium + * access mode is dynamic allocation, the repetitions are transmitted when the + * mobile station is scheduled USFs. + */ +static void test_ul_tbf_t3182_timeout(bool acked_mode) { struct osmo_gprs_rlcmac_prim *rlcmac_prim; int rc; @@ -873,6 +884,19 @@ rc = osmo_gprs_rlcmac_prim_lower_up(rlcmac_prim); OSMO_ASSERT(rc == 0); + if (acked_mode) { + /* Make sure we don't apply the max-4-cv0-tx limit as with unacked mode: */ + unsigned int i; + for (i = 0; i < 5; i++) { + rts_fn = fn_next_block(rts_fn); + printf("RTS %u: FN=%u\n", i, rts_fn); + /* Trigger transmission of LLC data (GMM Attach) (second part) */ + rlcmac_prim = osmo_gprs_rlcmac_prim_alloc_l1ctl_pdch_rts_ind(ts_nr, rts_fn, usf); + rc = osmo_gprs_rlcmac_prim_lower_up(rlcmac_prim); + OSMO_ASSERT(rc == 0); + } + } + /* increase time 5 seconds, timeout should trigger */ clock_override_add(5, 0); clock_debug("Expect T3182 timeout"); @@ -882,8 +906,10 @@ cleanup_test(); } +#if 0 +/* FIXME: enable this whenever unacknowledged mode is supported. */ /* 9.3.3.3.2: The block with CV=0 shall not be retransmitted more than four times. */ -static void test_ul_tbf_last_data_cv0_retrans_max(void) +static void test_ul_tbf_unack_mode_last_data_cv0_retrans_max(void) { struct osmo_gprs_rlcmac_prim *rlcmac_prim; int rc; @@ -943,6 +969,7 @@ printf("=== %s end ===\n", __func__); cleanup_test(); } +#endif /* 9.3.1 Countdown procedure */ static void test_ul_tbf_countdown_procedure(void) @@ -1206,8 +1233,11 @@ test_ul_tbf_t3164_timeout(); test_ul_tbf_t3166_timeout(); test_ul_tbf_n3104_timeout(); - test_ul_tbf_t3182_timeout(); - test_ul_tbf_last_data_cv0_retrans_max(); + test_ul_tbf_t3182_timeout(true); +#if 0 + test_ul_tbf_t3182_timeout(false); + test_ul_tbf_unack_mode_last_data_cv0_retrans_max(); +#endif test_ul_tbf_countdown_procedure(); test_ul_tbf_request_another_ul_tbf(); test_dl_tbf_ccch_assign(); diff --git a/tests/rlcmac/rlcmac_prim_test.err b/tests/rlcmac/rlcmac_prim_test.err index c76fe8f..19b289f 100644 --- a/tests/rlcmac/rlcmac_prim_test.err +++ b/tests/rlcmac/rlcmac_prim_test.err @@ -589,76 +589,6 @@ DLGLOBAL INFO UL_TBF{FLOW}: Last UL block sent (CV=0), start T3182 DLGLOBAL INFO UL_TBF{FLOW}: state_chg to FINISHED DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_DATA.request -DLGLOBAL INFO UL_TBF{FINISHED}: Timeout of T3182 -DLGLOBAL INFO UL_TBF_ASS{IDLE}: Deallocated -DLGLOBAL INFO UL_TBF{FINISHED}: Send L1CTL-CFG_UL_TBF.req ul_tbf_nr=0 (release) -DLGLOBAL DEBUG Tx to lower layers: L1CTL-CFG_UL_TBF.request -DLGLOBAL INFO UL_TBF{FINISHED}: Deallocated -DLGLOBAL INFO Tx L1CTL-PDCH_REL.req -DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_RELEASE.request -DLGLOBAL INFO DL_TBF_ASS{IDLE}: Deallocated -DLGLOBAL INFO Rx from upper layers: GRR-UNITDATA.request -DLGLOBAL INFO TLLI=0x00002342 not found, creating entity on the fly -DLGLOBAL INFO DL_TBF_ASS{IDLE}: Allocated -DLGLOBAL DEBUG GRE(00002342) Enqueueing LLC-PDU len=33 SAPI=GMM radio_prio=1 -DLGLOBAL INFO UL_TBF{NEW}: Allocated -DLGLOBAL INFO UL_TBF_ASS{IDLE}: Allocated -DLGLOBAL INFO UL_TBF_ASS{IDLE}: Received Event START -DLGLOBAL INFO UL_TBF{NEW}: Received Event UL_ASS_START -DLGLOBAL INFO UL_TBF{NEW}: state_chg to ASSIGN -DLGLOBAL INFO UL_TBF_ASS{IDLE}: Requesting one-phase packet access using CCCH -DLGLOBAL DEBUG Tx to lower layers: L1CTL-RACH.request -DLGLOBAL INFO UL_TBF_ASS{IDLE}: state_chg to WAIT_CCCH_IMM_ASS -DLGLOBAL DEBUG Rx from lower layers: L1CTL-CCCH_DATA.indication -DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_ESTABLISH.request -DLGLOBAL INFO UL_TBF_ASS{WAIT_CCCH_IMM_ASS}: Received Event RX_CCCH_IMM_ASS -DLGLOBAL INFO UL_TBF_ASS{WAIT_CCCH_IMM_ASS}: ImmAss TFI=0 initCS=CS-2 cur_tn=7 cur_fn=0 start_fn=0 -DLGLOBAL INFO UL_TBF_ASS{WAIT_CCCH_IMM_ASS}: ImmAss DynamicAlloc (1phase access) ts_nr=7 usf=0 -DLGLOBAL INFO UL_TBF_ASS{WAIT_CCCH_IMM_ASS}: state_chg to COMPLETED -DLGLOBAL INFO UL_TBF{ASSIGN}: Received Event UL_ASS_COMPL -DLGLOBAL INFO TBF(UL:NR-0:TLLI-00002342) Send L1CTL-CFG_UL_TBF.req ul_tbf_nr=0 ul_slotmask=0x80 tbf_starting_time(present=0 fn=0) -DLGLOBAL DEBUG Tx to lower layers: L1CTL-CFG_UL_TBF.request -DLGLOBAL INFO UL_TBF{ASSIGN}: state_chg to FLOW -DLGLOBAL INFO UL_TBF_ASS{COMPLETED}: state_chg to IDLE -DLGLOBAL DEBUG Rx from lower layers: L1CTL-PDCH_RTS.indication -DLGLOBAL DEBUG Rx RTS.ind (fn=4, ts=7, usf=0) -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Sending new block at BSN 0, CS=CS-2 -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Dequeue next LLC (len=33) -DLGLOBAL DEBUG -- Chunk with length 33 larger than space (26) left in block: copy only remaining space, and we are done -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) data block (BSN=0, CS-2, CV=15): 00 00 23 42 01 c0 00 08 01 01 d5 71 00 00 08 29 26 24 00 00 00 00 71 62 f2 24 6c 84 44 04 -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) need_padding 0 spb_status 0 spb 0 (BSN1 0 BSN2 -1) -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Copying 1 RLC blocks, 1 BSNs -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Copying data unit 0 (BSN=0 CV=15) -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) msg block (BSN 0, CS-2): 3c 01 01 00 00 23 42 01 c0 00 08 01 01 d5 71 00 00 08 29 26 24 00 00 00 00 71 62 f2 24 6c 84 44 04 00 -DLGLOBAL INFO UL_TBF{FLOW}: Received Event FIRST_UL_DATA_SENT -DLGLOBAL INFO UL_TBF{FLOW}: First UL block sent, stop T3164 -DLGLOBAL INFO UL_TBF{FLOW}: First UL block sent (1 phase access), start T3166 -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) N3104 inc (1) -DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_DATA.request -DLGLOBAL DEBUG Rx from lower layers: L1CTL-PDCH_DATA.indication -DLGLOBAL INFO TS=7 FN=4 Rx Pkt UL ACK/NACK -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Got GPRS UL ACK bitmap: SSN: 1, BSN 0 to 1 - 1 (1 blocks), "R" -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) ack: (BSN=0)"R"(BSN=0) R=ACK I=NACK -DLGLOBAL DEBUG - got ack for BSN=0 -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) V(B): (V(A)=1)""(V(S)-1=0) A=Acked N=Nacked U=Unacked X=Resend-Unacked I=Invalid -DLGLOBAL INFO UL_TBF{FLOW}: Received Event RX_UL_ACK_NACK -DLGLOBAL INFO UL_TBF{FLOW}: Contention resolution succeeded, stop T3166 -DLGLOBAL DEBUG Rx from lower layers: L1CTL-PDCH_RTS.indication -DLGLOBAL DEBUG Rx RTS.ind (fn=8, ts=7, usf=0) -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Sending new block at BSN 1, CS=CS-2 -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Entering Countdown procedure CV=0 -DLGLOBAL DEBUG -- Chunk with length 7 is less than remaining space (30): add length header to delimit LLC frame -DLGLOBAL DEBUG -- Final block, so we done. -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Complete UL frame, len=0 -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) data block (BSN=1, CS-2, CV=0): 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1) -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Copying 1 RLC blocks, 1 BSNs -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Copying data unit 0 (BSN=1 CV=0) -DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) msg block (BSN 1, CS-2): 00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 -DLGLOBAL INFO UL_TBF{FLOW}: Received Event LAST_UL_DATA_SENT -DLGLOBAL INFO UL_TBF{FLOW}: Last UL block sent (CV=0), start T3182 -DLGLOBAL INFO UL_TBF{FLOW}: state_chg to FINISHED -DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_DATA.request DLGLOBAL DEBUG Rx from lower layers: L1CTL-PDCH_RTS.indication DLGLOBAL DEBUG Rx RTS.ind (fn=13, ts=7, usf=0) DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Restarting at BSN 1, because all blocks have been transmitted. @@ -706,12 +636,24 @@ DLGLOBAL INFO UL_TBF{FINISHED}: Received Event LAST_UL_DATA_SENT DLGLOBAL INFO UL_TBF{FINISHED}: Data block with CV=0 retransmit attempts=4 DLGLOBAL INFO UL_TBF{FINISHED}: Last UL block sent (CV=0), start T3182 -DLGLOBAL NOTICE UL_TBF{FINISHED}: TBF establishment failure (Data block with CV=0 retransmit attempts=4) +DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_DATA.request +DLGLOBAL DEBUG Rx from lower layers: L1CTL-PDCH_RTS.indication +DLGLOBAL DEBUG Rx RTS.ind (fn=30, ts=7, usf=0) +DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Restarting at BSN 1, because all blocks have been transmitted. +DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Resending BSN 1 +DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) need_padding 0 spb_status 0 spb 0 (BSN1 1 BSN2 -1) +DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Copying 1 RLC blocks, 1 BSNs +DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) Copying data unit 0 (BSN=1 CV=0) +DLGLOBAL DEBUG TBF(UL:NR-0:TLLI-00002342) msg block (BSN 1, CS-2): 00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 +DLGLOBAL INFO UL_TBF{FINISHED}: Received Event LAST_UL_DATA_SENT +DLGLOBAL INFO UL_TBF{FINISHED}: Data block with CV=0 retransmit attempts=5 +DLGLOBAL INFO UL_TBF{FINISHED}: Last UL block sent (CV=0), start T3182 +DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_DATA.request +DLGLOBAL INFO UL_TBF{FINISHED}: Timeout of T3182 DLGLOBAL INFO UL_TBF_ASS{IDLE}: Deallocated DLGLOBAL INFO UL_TBF{FINISHED}: Send L1CTL-CFG_UL_TBF.req ul_tbf_nr=0 (release) DLGLOBAL DEBUG Tx to lower layers: L1CTL-CFG_UL_TBF.request DLGLOBAL INFO UL_TBF{FINISHED}: Deallocated -DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_DATA.request DLGLOBAL INFO Tx L1CTL-PDCH_REL.req DLGLOBAL DEBUG Tx to lower layers: L1CTL-PDCH_RELEASE.request DLGLOBAL INFO DL_TBF_ASS{IDLE}: Deallocated diff --git a/tests/rlcmac/rlcmac_prim_test.ok b/tests/rlcmac/rlcmac_prim_test.ok index dcaa816..f28262a 100644 --- a/tests/rlcmac/rlcmac_prim_test.ok +++ b/tests/rlcmac/rlcmac_prim_test.ok @@ -129,21 +129,6 @@ test_rlcmac_prim_up_cb(): Rx GMMRR-LLC_TRANSMITTED.indication TLLI=0x00002342 test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=4 ts=7 data_len=34 data=[3c 01 01 00 00 23 42 01 c0 00 08 01 01 d5 71 00 00 08 29 26 24 00 00 00 00 71 62 f2 24 6c 84 44 04 00 ] test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=8 ts=7 data_len=34 data=[00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 ] -sys={5.000000}, mono={5.000000}: clock_override_add -sys={5.000000}, mono={5.000000}: Expect T3182 timeout -test_rlcmac_prim_down_cb(): Rx L1CTL-CFG_UL_TBF.request ul_tbf_nr=0 ul_slotmask=0x00 -=== test_ul_tbf_t3182_timeout end === -sys={5.027690}, mono={5.027690}: clock_override_add -sys={5.027690}, mono={5.027690}: Expect defer_pkt_idle_timer timeout -test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_RELEASE.request -=== test_ul_tbf_last_data_cv0_retrans_max start === -sys={0.000000}, mono={0.000000}: clock_override_set -test_rlcmac_prim_down_cb(): Rx L1CTL-RACH.request ra=0x78 -test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_ESTABLISH.request -test_rlcmac_prim_down_cb(): Rx L1CTL-CFG_UL_TBF.request ul_tbf_nr=0 ul_slotmask=0x80 -test_rlcmac_prim_up_cb(): Rx GMMRR-LLC_TRANSMITTED.indication TLLI=0x00002342 -test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=4 ts=7 data_len=34 data=[3c 01 01 00 00 23 42 01 c0 00 08 01 01 d5 71 00 00 08 29 26 24 00 00 00 00 71 62 f2 24 6c 84 44 04 00 ] -test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=8 ts=7 data_len=34 data=[00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 ] RTS 0: FN=13 test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=13 ts=7 data_len=34 data=[00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 ] RTS 1: FN=17 @@ -151,11 +136,15 @@ RTS 2: FN=21 test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=21 ts=7 data_len=34 data=[00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 ] RTS 3: FN=26 -test_rlcmac_prim_down_cb(): Rx L1CTL-CFG_UL_TBF.request ul_tbf_nr=0 ul_slotmask=0x00 test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=26 ts=7 data_len=34 data=[00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 ] -=== test_ul_tbf_last_data_cv0_retrans_max end === -sys={0.027690}, mono={0.027690}: clock_override_add -sys={0.027690}, mono={0.027690}: Expect defer_pkt_idle_timer timeout +RTS 4: FN=30 +test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_DATA.request fn=30 ts=7 data_len=34 data=[00 00 02 1d 11 e5 10 00 e2 18 f2 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 00 ] +sys={5.000000}, mono={5.000000}: clock_override_add +sys={5.000000}, mono={5.000000}: Expect T3182 timeout +test_rlcmac_prim_down_cb(): Rx L1CTL-CFG_UL_TBF.request ul_tbf_nr=0 ul_slotmask=0x00 +=== test_ul_tbf_t3182_timeout end === +sys={5.027690}, mono={5.027690}: clock_override_add +sys={5.027690}, mono={5.027690}: Expect defer_pkt_idle_timer timeout test_rlcmac_prim_down_cb(): Rx L1CTL-PDCH_RELEASE.request === test_ul_tbf_countdown_procedure start === sys={0.000000}, mono={0.000000}: clock_override_set -- To view, visit https://gerrit.osmocom.org/c/libosmo-gprs/+/34679?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmo-gprs Gerrit-Branch: master Gerrit-Change-Id: Ie7cdb286b9c7255e3fbf9f936f103fab04acf96a Gerrit-Change-Number: 34679 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin@sysmocom.de> Gerrit-Reviewer: Hoernchen <ewild@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy@sysmocom.de> Gerrit-MessageType: merged