Hoernchen has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-trx/+/35761?usp=email ) Change subject: ms: do not set the blade tuning mode ...................................................................... ms: do not set the blade tuning mode Sophisticated users can export BLADERF_DEFAULT_TUNING_MODE=fpga which reduces the startup time to 1 second, or BLADERF_DEFAULT_TUNING_MODE=fpga which always works. Defaulting to fpga mode has the unfortunate side effect that the blade can get stuck in a weird invalid mode when supplying wrong parameters that breaks sample streaming until it is power cycled or "reset" by using host tuning once. So, let's do the safe thing, and not default to fpga mode. Change-Id: I109f925f07a198d1fb33fe793e91e455fea05a96 --- M Transceiver52M/ms/bladerf_specific.h 1 file changed, 19 insertions(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/osmo-trx refs/changes/61/35761/1 diff --git a/Transceiver52M/ms/bladerf_specific.h b/Transceiver52M/ms/bladerf_specific.h index e9245d4..57aae75 100644 --- a/Transceiver52M/ms/bladerf_specific.h +++ b/Transceiver52M/ms/bladerf_specific.h @@ -255,7 +255,6 @@ bladerf_log_set_verbosity(BLADERF_LOG_LEVEL_DEBUG); bladerf_set_usb_reset_on_open(true); - setenv("BLADERF_DEFAULT_TUNING_MODE","fpga",1); // ensure blade 2 does not spend 10 seconds initializing host control blade_check(bladerf_open, &dev, ""); if (!dev) { std::cerr << "open failed, device missing?" << std::endl; -- To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/35761?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-trx Gerrit-Branch: master Gerrit-Change-Id: I109f925f07a198d1fb33fe793e91e455fea05a96 Gerrit-Change-Number: 35761 Gerrit-PatchSet: 1 Gerrit-Owner: Hoernchen &lt;ewild(a)sysmocom.de&gt; Gerrit-MessageType: newchange