fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmocom-bb/+/28874 ) Change subject: trxcon: allow populating global SACCH cache via L1CTL ...................................................................... trxcon: allow populating global SACCH cache via L1CTL Change-Id: I0f467fc07cf844cc73465f235b36ba7d00788c9f Related: OS#5635, OS#5599 --- M src/host/trxcon/include/osmocom/bb/l1sched/l1sched.h M src/host/trxcon/include/osmocom/bb/trxcon/trxcon.h M src/host/trxcon/src/l1ctl.c M src/host/trxcon/src/sched_prim.c M src/host/trxcon/src/sched_trx.c M src/host/trxcon/src/trxcon_fsm.c 6 files changed, 75 insertions(+), 63 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/74/28874/1 diff --git a/src/host/trxcon/include/osmocom/bb/l1sched/l1sched.h b/src/host/trxcon/include/osmocom/bb/l1sched/l1sched.h index 3f7dae0..04303f0 100644 --- a/src/host/trxcon/include/osmocom/bb/l1sched/l1sched.h +++ b/src/host/trxcon/include/osmocom/bb/l1sched/l1sched.h @@ -374,6 +374,8 @@ void (*clock_cb)(struct l1sched_state *sched); /*! List of timeslots maintained by this scheduler */ struct l1sched_ts *ts[TRX_TS_COUNT]; + /*! SACCH cache (common for all lchans) */ + uint8_t sacch_cache[GSM_MACBLOCK_LEN]; /*! BSIC value learned from SCH bursts */ uint8_t bsic; /*! Logging context (used as prefix for messages) */ diff --git a/src/host/trxcon/include/osmocom/bb/trxcon/trxcon.h b/src/host/trxcon/include/osmocom/bb/trxcon/trxcon.h index 6a43bcb..430b26e 100644 --- a/src/host/trxcon/include/osmocom/bb/trxcon/trxcon.h +++ b/src/host/trxcon/include/osmocom/bb/trxcon/trxcon.h @@ -25,6 +25,7 @@ TRXCON_EV_SET_TCH_MODE_REQ, TRXCON_EV_PHY_CONFIG_REQ, TRXCON_EV_TX_ACCESS_BURST_REQ, + TRXCON_EV_UPDATE_SACCH_CACHE_REQ, TRXCON_EV_DEDICATED_ESTABLISH_REQ, TRXCON_EV_DEDICATED_RELEASE_REQ, TRXCON_EV_TX_TRAFFIC_REQ, diff --git a/src/host/trxcon/src/l1ctl.c b/src/host/trxcon/src/l1ctl.c index b907917..c6939f5 100644 --- a/src/host/trxcon/src/l1ctl.c +++ b/src/host/trxcon/src/l1ctl.c @@ -644,10 +644,18 @@ "Recv %s Req (chan_nr=0x%02x, link_id=0x%02x, len=%zu)\n", traffic ? "TRAFFIC" : "DATA", req.chan_nr, req.link_id, req.data_len); - if (traffic) - osmo_fsm_inst_dispatch(trxcon->fi, TRXCON_EV_TX_TRAFFIC_REQ, &req); - else - osmo_fsm_inst_dispatch(trxcon->fi, TRXCON_EV_TX_DATA_REQ, &req); + switch (trxcon->fi->state) { + case TRXCON_ST_DEDICATED: + if (traffic) + osmo_fsm_inst_dispatch(trxcon->fi, TRXCON_EV_TX_TRAFFIC_REQ, &req); + else + osmo_fsm_inst_dispatch(trxcon->fi, TRXCON_EV_TX_DATA_REQ, &req); + break; + default: + if (!traffic && req.link_id == 0x40) + osmo_fsm_inst_dispatch(trxcon->fi, TRXCON_EV_UPDATE_SACCH_CACHE_REQ, &req); + /* TODO: log an error about uhnandled DATA.req / TRAFFIC.req */ + } msgb_free(msg); return 0; diff --git a/src/host/trxcon/src/sched_prim.c b/src/host/trxcon/src/sched_prim.c index 9b6d28d..f97e505 100644 --- a/src/host/trxcon/src/sched_prim.c +++ b/src/host/trxcon/src/sched_prim.c @@ -116,8 +116,7 @@ } /** - * Composes a new primitive using either cached (if populated), - * or "dummy" Measurement Report message. + * Composes a new primitive from cached RR Measurement Report. * * @param lchan lchan to assign a primitive * @return SACCH primitive to be transmitted @@ -125,38 +124,8 @@ static struct l1sched_ts_prim *prim_compose_mr(struct l1sched_lchan_state *lchan) { struct l1sched_ts_prim *prim; - uint8_t *mr_src_ptr; bool cached; - /* "Dummy" Measurement Report */ - static const uint8_t meas_rep_dummy[] = { - /* L1 SACCH pseudo-header */ - 0x0f, 0x00, - - /* LAPDm header */ - 0x01, 0x03, 0x49, - - /* RR Management messages, Measurement Report */ - 0x06, 0x15, - - /* Measurement results (see 3GPP TS 44.018, section 10.5.2.20): - * 0... .... = BA-USED: 0 - * .0.. .... = DTX-USED: DTX was not used - * ..11 0110 = RXLEV-FULL-SERVING-CELL: -57 <= x < -56 dBm (54) - * 0... .... = 3G-BA-USED: 0 - * .1.. .... = MEAS-VALID: The measurement results are not valid - * ..11 0110 = RXLEV-SUB-SERVING-CELL: -57 <= x < -56 dBm (54) - * 0... .... = SI23_BA_USED: 0 - * .000 .... = RXQUAL-FULL-SERVING-CELL: BER < 0.2%, Mean value 0.14% (0) - * .... 000. = RXQUAL-SUB-SERVING-CELL: BER < 0.2%, Mean value 0.14% (0) - * .... ...1 11.. .... = NO-NCELL-M: Neighbour cell information not available */ - 0x36, 0x76, 0x01, 0xc0, - - /* 0** -- Padding with zeroes */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - }; - /* Allocate a new primitive */ prim = prim_alloc(lchan, GSM_MACBLOCK_LEN, L1SCHED_PRIM_DATA, l1sched_lchan_desc[lchan->type].chan_nr, @@ -167,43 +136,24 @@ cached = (lchan->sacch.mr_cache[2] != 0x00 && lchan->sacch.mr_cache[3] != 0x00 && lchan->sacch.mr_cache[4] != 0x00); - if (cached) { /* Use the cached one */ - mr_src_ptr = lchan->sacch.mr_cache; - lchan->sacch.mr_cache_usage++; - } else { /* Use "dummy" one */ - mr_src_ptr = (uint8_t *) meas_rep_dummy; + if (!cached) { + memcpy(&lchan->sacch.mr_cache[0], + &lchan->ts->sched->sacch_cache[0], + sizeof(lchan->sacch.mr_cache)); } /* Compose a new Measurement Report primitive */ - memcpy(prim->payload, mr_src_ptr, GSM_MACBLOCK_LEN); - - /** - * Update the L1 SACCH pseudo-header (only for cached MRs) - * - * TODO: filling of the actual values into cached Measurement - * Reports would break the distance spoofing feature. If it - * were known whether the spoofing is enabled or not, we could - * decide whether to update the cached L1 SACCH header here. - */ - if (!cached) { -#warning "FIXME: no direct access to trxcon->l1p.{tx_power,ta}" -#if 0 - prim->payload[0] = lchan->ts->sched->trx->tx_power; - prim->payload[1] = lchan->ts->sched->trx->ta; -#endif - } + memcpy(&prim->payload[0], &lchan->sacch.mr_cache[0], GSM_MACBLOCK_LEN); /* Inform about the cache usage count */ - if (cached && lchan->sacch.mr_cache_usage > 5) { + if (++lchan->sacch.mr_cache_usage > 5) { LOGP_LCHAND(lchan, LOGL_NOTICE, "SACCH MR cache usage count=%u > 5 " "=> ancient measurements, please fix!\n", lchan->sacch.mr_cache_usage); } - LOGP_LCHAND(lchan, LOGL_NOTICE, - "Using a %s Measurement Report\n", - cached ? "cached" : "dummy"); + LOGP_LCHAND(lchan, LOGL_NOTICE, "Using cached Measurement Report\n"); return prim; } diff --git a/src/host/trxcon/src/sched_trx.c b/src/host/trxcon/src/sched_trx.c index 10a4c5f..00adcd6 100644 --- a/src/host/trxcon/src/sched_trx.c +++ b/src/host/trxcon/src/sched_trx.c @@ -39,6 +39,35 @@ int l1sched_log_cat_common = DLGLOBAL; int l1sched_log_cat_data = DLGLOBAL; +/* "Dummy" Measurement Report */ +static const uint8_t meas_rep_dummy[] = { + /* L1 SACCH pseudo-header */ + 0x0f, 0x00, + + /* LAPDm header */ + 0x01, 0x03, 0x49, + + /* RR Management messages, Measurement Report */ + 0x06, 0x15, + + /* Measurement results (see 3GPP TS 44.018, section 10.5.2.20): + * 0... .... = BA-USED: 0 + * .0.. .... = DTX-USED: DTX was not used + * ..11 0110 = RXLEV-FULL-SERVING-CELL: -57 <= x < -56 dBm (54) + * 0... .... = 3G-BA-USED: 0 + * .1.. .... = MEAS-VALID: The measurement results are not valid + * ..11 0110 = RXLEV-SUB-SERVING-CELL: -57 <= x < -56 dBm (54) + * 0... .... = SI23_BA_USED: 0 + * .000 .... = RXQUAL-FULL-SERVING-CELL: BER < 0.2%, Mean value 0.14% (0) + * .... 000. = RXQUAL-SUB-SERVING-CELL: BER < 0.2%, Mean value 0.14% (0) + * .... ...1 11.. .... = NO-NCELL-M: Neighbour cell information not available */ + 0x36, 0x76, 0x01, 0xc0, + + /* 0** -- Padding with zeroes */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + static int l1sched_cfg_pchan_comb_req(struct l1sched_state *sched, uint8_t tn, enum gsm_phys_chan_config pchan) { @@ -175,6 +204,8 @@ .priv = priv, }; + memcpy(&sched->sacch_cache[0], &meas_rep_dummy[0], sizeof(meas_rep_dummy)); + if (cfg->log_prefix == NULL) sched->log_prefix = talloc_asprintf(sched, "l1sched[0x%p]: ", sched); else @@ -217,6 +248,8 @@ /* Stop and reset clock counter if required */ if (reset_clock) l1sched_clck_reset(sched); + + memcpy(&sched->sacch_cache[0], &meas_rep_dummy[0], sizeof(meas_rep_dummy)); } struct l1sched_ts *l1sched_add_ts(struct l1sched_state *sched, int tn) diff --git a/src/host/trxcon/src/trxcon_fsm.c b/src/host/trxcon/src/trxcon_fsm.c index fb9bd8f..b5a153a 100644 --- a/src/host/trxcon/src/trxcon_fsm.c +++ b/src/host/trxcon/src/trxcon_fsm.c @@ -82,6 +82,22 @@ } break; } + case TRXCON_EV_UPDATE_SACCH_CACHE_REQ: + { + const struct trxcon_param_tx_traffic_data_req *req = data; + + if (req->link_id != L1SCHED_CH_LID_SACCH) { + LOGPFSML(fi, LOGL_ERROR, "Unexpected link_id=%u\n", req->link_id); + break; + } + if (req->data_len != GSM_MACBLOCK_LEN) { + LOGPFSML(fi, LOGL_ERROR, "Unexpected data length=%u\n", req->data_len); + break; + } + + memcpy(&trxcon->sched->sacch_cache[0], req->data, req->data_len); + break; + } default: OSMO_ASSERT(0); } @@ -483,6 +499,7 @@ OSMO_VALUE_STRING(TRXCON_EV_SET_TCH_MODE_REQ), OSMO_VALUE_STRING(TRXCON_EV_PHY_CONFIG_REQ), OSMO_VALUE_STRING(TRXCON_EV_TX_ACCESS_BURST_REQ), + OSMO_VALUE_STRING(TRXCON_EV_UPDATE_SACCH_CACHE_REQ), OSMO_VALUE_STRING(TRXCON_EV_DEDICATED_ESTABLISH_REQ), OSMO_VALUE_STRING(TRXCON_EV_DEDICATED_RELEASE_REQ), OSMO_VALUE_STRING(TRXCON_EV_TX_TRAFFIC_REQ), @@ -503,7 +520,8 @@ | S(TRXCON_EV_L2IF_FAILURE) | S(TRXCON_EV_RESET_FULL_REQ) | S(TRXCON_EV_RESET_SCHED_REQ) - | S(TRXCON_EV_PHY_CONFIG_REQ), + | S(TRXCON_EV_PHY_CONFIG_REQ) + | S(TRXCON_EV_UPDATE_SACCH_CACHE_REQ), .allstate_action = &trxcon_allstate_action, .timer_cb = &trxcon_timer_cb, .pre_term = &trxcon_fsm_pre_term_cb, -- To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/28874 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Change-Id: I0f467fc07cf844cc73465f235b36ba7d00788c9f Gerrit-Change-Number: 28874 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy@sysmocom.de> Gerrit-MessageType: newchange