pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-hnbgw/+/39978?usp=email ) Change subject: Set 'hnbap-allow-tmsi 1' by default ...................................................................... Set 'hnbap-allow-tmsi 1' by default Due to historical reasons [0], we didn't allow UE Registration with (P)TMSI by default, only with IMSI. The historical reasons were fixed a long time ago, and hence why virtually every osmo-hnbgw you can find nowadays (see doc/examples/ dir) contained an explicit "hnbap-allow-tmsi 1" to override the default behavior. However, the fact that this was not the default behavior causes some problems on production network which didn't have this config set explicitly. Hence, enable it by default. [0] Original osmo-hnbgw code in osmo-iuh.git 12181a937ff5658af49e12c57cb08ecba859e1f1 where this feature was added explains with more detail the problem. If UE registered with TMSI, then the HNBGW at the time didn't have information about its IMSI and hence could not page the UE from IMSI. Since ~5.5 years ago (Sep 2019 in osmo-sgsn.git 10b3d70fea9628eecb58f07e1bce31f63823edfb), osmo-sgsn already sends a Common Id to the HNBGW containing the UE IMSI when it registers, so the HNBGW has no related problem anymore. The VTY command is left available in the event somebody wants to operate osmo-hnbgw with a broken MSC/SGSN (like older mentioned osmo-sgsn). Related: SYS#7430 Change-Id: I3c4c0decf34959fc2d5683b02224f27d204aa5e9 --- M doc/examples/osmo-hnbgw/osmo-hnbgw-cs7.cfg M doc/examples/osmo-hnbgw/osmo-hnbgw-pfcp.cfg M doc/examples/osmo-hnbgw/osmo-hnbgw.cfg M src/osmo-hnbgw/hnbgw.c M src/osmo-hnbgw/hnbgw_vty.c M tests/osmo-hnbgw-vty-test.cfg 6 files changed, 4 insertions(+), 7 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-hnbgw refs/changes/78/39978/1 diff --git a/doc/examples/osmo-hnbgw/osmo-hnbgw-cs7.cfg b/doc/examples/osmo-hnbgw/osmo-hnbgw-cs7.cfg index 671d790..ee9c89e 100644 --- a/doc/examples/osmo-hnbgw/osmo-hnbgw-cs7.cfg +++ b/doc/examples/osmo-hnbgw/osmo-hnbgw-cs7.cfg @@ -13,7 +13,6 @@ plmn 001 01 iuh local-ip 0.0.0.0 - hnbap-allow-tmsi 1 msc 0 remote-addr my-msc sgsn 0 diff --git a/doc/examples/osmo-hnbgw/osmo-hnbgw-pfcp.cfg b/doc/examples/osmo-hnbgw/osmo-hnbgw-pfcp.cfg index 7599427..13835ad 100644 --- a/doc/examples/osmo-hnbgw/osmo-hnbgw-pfcp.cfg +++ b/doc/examples/osmo-hnbgw/osmo-hnbgw-pfcp.cfg @@ -11,7 +11,6 @@ plmn 001 01 iuh local-ip 0.0.0.0 - hnbap-allow-tmsi 1 mgw 0 remote-ip 127.0.0.1 local-port 2729 diff --git a/doc/examples/osmo-hnbgw/osmo-hnbgw.cfg b/doc/examples/osmo-hnbgw/osmo-hnbgw.cfg index 996a3ae..dd82788 100644 --- a/doc/examples/osmo-hnbgw/osmo-hnbgw.cfg +++ b/doc/examples/osmo-hnbgw/osmo-hnbgw.cfg @@ -11,7 +11,6 @@ plmn 001 01 iuh local-ip 0.0.0.0 - hnbap-allow-tmsi 1 mgw 0 remote-ip 127.0.0.1 local-port 2729 diff --git a/src/osmo-hnbgw/hnbgw.c b/src/osmo-hnbgw/hnbgw.c index d4515a8..8da6364 100644 --- a/src/osmo-hnbgw/hnbgw.c +++ b/src/osmo-hnbgw/hnbgw.c @@ -975,6 +975,7 @@ /* strdup so we can easily talloc_free in the VTY code */ g_hnbgw->config.iuh_local_ip = talloc_strdup(g_hnbgw, HNBGW_LOCAL_IP_DEFAULT); g_hnbgw->config.iuh_local_port = IUH_DEFAULT_SCTP_PORT; + g_hnbgw->config.hnbap_allow_tmsi = true; g_hnbgw->config.log_prefix_hnb_id = true; g_hnbgw->config.accept_all_hnb = true; diff --git a/src/osmo-hnbgw/hnbgw_vty.c b/src/osmo-hnbgw/hnbgw_vty.c index 68d4b1f..d99a998 100644 --- a/src/osmo-hnbgw/hnbgw_vty.c +++ b/src/osmo-hnbgw/hnbgw_vty.c @@ -334,7 +334,7 @@ "hnbap-allow-tmsi (0|1)", "Allow HNBAP UE Register messages with TMSI or PTMSI identity\n" "Only accept IMSI identity, reject TMSI or PTMSI\n" - "Accept IMSI, TMSI or PTMSI as UE identity\n") + "Accept IMSI, TMSI or PTMSI as UE identity (default)\n") { g_hnbgw->config.hnbap_allow_tmsi = (*argv[0] == '1'); return CMD_SUCCESS; @@ -1039,8 +1039,8 @@ if (port && port != IUH_DEFAULT_SCTP_PORT) vty_out(vty, " local-port %u%s", port, VTY_NEWLINE); - if (g_hnbgw->config.hnbap_allow_tmsi) - vty_out(vty, " hnbap-allow-tmsi 1%s", VTY_NEWLINE); + if (!g_hnbgw->config.hnbap_allow_tmsi) + vty_out(vty, " hnbap-allow-tmsi 0%s", VTY_NEWLINE); return CMD_SUCCESS; } diff --git a/tests/osmo-hnbgw-vty-test.cfg b/tests/osmo-hnbgw-vty-test.cfg index 6f9c0b6..11327a3 100644 --- a/tests/osmo-hnbgw-vty-test.cfg +++ b/tests/osmo-hnbgw-vty-test.cfg @@ -32,7 +32,6 @@ hnbgw iuh local-ip 0.0.0.0 - hnbap-allow-tmsi 1 mgw 0 remote-ip 127.0.0.1 local-port 2729 -- To view, visit https://gerrit.osmocom.org/c/osmo-hnbgw/+/39978?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: osmo-hnbgw Gerrit-Branch: master Gerrit-Change-Id: I3c4c0decf34959fc2d5683b02224f27d204aa5e9 Gerrit-Change-Number: 39978 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin@sysmocom.de>