[M] Change in osmo-remsim[master]: Add priority mapping support to osmo-remsim-server
Attention is currently required from: jolly, laforge, lynxis. Hello Jenkins Builder, laforge, lynxis, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-remsim/+/43745?usp=email to look at the new patch set (#7). The following approvals got outdated and were removed: Code-Review+1 by laforge, Verified+1 by Jenkins Builder Change subject: Add priority mapping support to osmo-remsim-server ...................................................................... Add priority mapping support to osmo-remsim-server A normal mapping and a mapping with higher priority may share the same bank/slot. In this case the normal mapping will be inactive until the mapping with higher priority has been removed. This allows temporary mapping for maintenance purposes without removing the existing mapping to a bank/slot. If a mappings with different priority share the same bank/slot, the mapping with higher priority is activated and the mapping with the lower priority is suspended. The following steps are performed, if a mapping to the same bank/slot is added with higher priority: * The higher priority mapping is created and into INACTIVE state. * The lower priority mapping is suspended and put into INACTIVE state. * The higher priority mapping is activated and becomes ACTIVE. Once the higher priority mapping is removed, the lower priority mapping is resumed. The following steps are performed: * The higher priority mapping is deactivated and then removed. * The lower priority mapping in INACTIVE state is activated again and becomes ACTIVE. If a lower priority mapping is added while a higher priority mapping to the same bank/slot exists, the added mapping will stay in INACTIVE state until it is removed or the higher priority mapping is removed. To control the priority attribute, the rest API is expanded. An optional 'priority' tag is added to the URL. If not specified, the default priority of 0 is used. The rest API allows to show only mappings with given or default priority, not all at once. This prevents prioritized mappings from interfering with user's applications. Related: SYS#8159 Change-Id: I885b3b529276f46fbbe6d86be2170b0bffbb8434 --- M src/server/rest_api.c M src/server/rspro_server.c M src/slotmap.h 3 files changed, 103 insertions(+), 10 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-remsim refs/changes/45/43745/7 -- To view, visit https://gerrit.osmocom.org/c/osmo-remsim/+/43745?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: osmo-remsim Gerrit-Branch: master Gerrit-Change-Id: I885b3b529276f46fbbe6d86be2170b0bffbb8434 Gerrit-Change-Number: 43745 Gerrit-PatchSet: 7 Gerrit-Owner: jolly <andreas@eversberg.eu> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge@osmocom.org> Gerrit-Reviewer: lynxis <lynxis@fe80.eu> Gerrit-CC: pespin <pespin@sysmocom.de> Gerrit-Attention: jolly <andreas@eversberg.eu> Gerrit-Attention: laforge <laforge@osmocom.org> Gerrit-Attention: lynxis <lynxis@fe80.eu>
participants (1)
-
jolly