neels has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/31616 ) Change subject: doc: add codec_resolution.msc ...................................................................... doc: add codec_resolution.msc Illustrate the various factors that influence picking a codec for a 2G voice call in osmo-bsc. Change-Id: I3d63a0d587a43fc18ea54b3982800b19b4d50a08 --- M doc/Makefile.am A doc/codec_resolution.msc 2 files changed, 61 insertions(+), 0 deletions(-) Approvals: laforge: Looks good to me, but someone else must approve pespin: Looks good to me, approved Jenkins Builder: Verified diff --git a/doc/Makefile.am b/doc/Makefile.am index d68b3f6..32d06c1 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -14,6 +14,7 @@ $(builddir)/handover-inter-bsc-in.png \ $(builddir)/mgw-endpoint.png \ $(builddir)/location_services_ta.png \ + $(builddir)/codec_resolution.png \ $(NULL) dot: \ diff --git a/doc/codec_resolution.msc b/doc/codec_resolution.msc new file mode 100644 index 0000000..4550448 --- /dev/null +++ b/doc/codec_resolution.msc @@ -0,0 +1,48 @@ +msc { + hscale="1.7"; + ms[label="MS/BTS"],cfg[label="osmo-bsc.cfg"],bsc[label="osmo-bsc"],__msc[label="MSC"],sip[label="SIP"]; + + ms => bsc [label="EST IND / Compl L3"]; + cfg => bsc [label="'msc 0'\n'codec-list fr3 hr3 fr2 fr1 hr1'"]; + bsc rbox bsc [label="build Speech Codec List\ngen_bss_supported_codec_list()"]; + bsc => __msc [label="Compl L3"]; + bsc note __msc [label="Speech Codec List (BSS Supported)\n{GSM0808_SCT_FR3 + AMR-cfg,\nGSM0808_SCT_HR3 + AMR-cfg,\nGSM0808_SCT_FR2,\nGSM0808_SCT_FR1,\nGSM0808_SCT_HR1}"]; + --- [label="AMR-cfg:"]; + bsc note __msc [label="S0-S15: 16bit flags\nS0 = 1: 4.75 ---- ---- ---- ---- ---- ---- ----\nS1 = 1: 4.75 ---- 5.90 ---- 7.40 ---- ---- 12.2\nS2 = 1: ---- ---- 5.90 ---- ---- ---- ---- ----\nS3 = 1: ---- ---- ---- 6.70 ---- ---- ---- ----\nS4 = 1: ---- ---- ---- ---- 7.40 ---- ---- ----\nS5 = 1: ---- ---- ---- ---- ---- 7.95 ---- ----\nS6 = 1: ---- ---- ---- ---- ---- ---- 10.2 ----\nS7 = 1: ---- ---- ---- ---- ---- ---- ---- 12.2\n\nS8 = 1: 4.75 ---- 5.90 ---- ---- ---- ---- ----\nS9 = 1: 4.75 ---- 5.90 6.70 ---- ---- ---- ----\nS10= 1: 4.75 ---- 5.90 6.70 7.40 ---- ---- ----\nS11= 1: ---- ---- ---- ---- ---- ---- ---- ----\nS12= 1: 4.75 ---- 5.90 6.70 ---- ---- 10.2 ----\nS13= 1: ---- ---- ---- ---- ---- ---- ---- ----\nS14= 1: 4.75 ---- 5.90 ---- ---- 7.95 ---- 12.2\nS15= 1: ---- ---- ---- ---- ---- ---- ---- ----\n\n3GPP TS 28.062 Table 7.11.3.1.3-2: \"Preferred Configurations\",\nsome removed as specified in 3GPP TS 48.008 3.2.2.103"]; + + cfg => bsc [label="'bts 0'\n'amr tch-x modes 0 2 4 7'"]; + bsc rbox bsc [label="convert AMR modes to\nbts-S0-S15"]; + cfg => bsc [label="'msc 0'\n'amr-config 4_75k allowed'"]; + bsc rbox bsc [label="convert AMR modes to\nmsc-S0-S15"]; + bsc => __msc [label="Compl L3 Speech Codec List:\nbitwise AND:\nbts-S0-S15 & msc-S0-S15"]; + ---; + + ms => __msc [label="Bearer Capabilities"]; + __msc <= sip [label="SDP"]; + __msc note sip [label="m=audio 12345 RTP/AVP 112 3 111 110\na=rtpmap:112 AMR/8000\na=fmtp:112 mode-set=0,2,4,7\na=rtpmap:3 GSM/8000\na=rtpmap:111 GSM-HR-08/8000\na=rtpmap:110 GSM-EFR/8000"]; + + __msc rbox __msc [label="combine:\nBSC: Speech Codec List\nMS: Bearer Cap\nSIP: SDP"]; + + bsc <= __msc [label="BSSMAP Assignment Request\ncontains\nChannel Type\nSpeech Codec List (MSC Preferred)"]; + bsc note __msc [label="Channel Type\nChannel Rate And Type:\n- [prefer] full rate\n- [prefer] half rate\n- indicated by Permitted Speech list\nPermitted Speech [1..9]:\n{GSM0808_PERM_FR3,\nGSM0808_PERM_HR3,\nGSM0808_PERM_FR2,\nGSM0808_PERM_FR1,\nGSM0808_PERM_HR1}"]; + bsc note __msc [label="Speech Codec List (MSC Preferred)\n{GSM0808_SCT_FR3 + AMR-cfg,\nGSM0808_SCT_HR3 + AMR-cfg,\nGSM0808_SCT_FR2,\nGSM0808_SCT_FR1,\nGSM0808_SCT_HR1}"]; + + cfg => bsc [label="'msc 0'\n'codec-list fr3 hr3 fr2 fr1 hr1'"]; + cfg => bsc [label="'bts 0'\n'phys_chan_cfg TCH/F'"]; + cfg => bsc [label="'bts 0'\n'codec-support amr efr fr hr'"]; + + cfg rbox bsc [label="combine:\n'msc 0' 'codec-list fr3 hr3 fr2 fr1 hr1'\n'bts 0' 'phys_chan_cfg TCH/F'\n'bts 0' 'codec-support amr efr fr hr'\nMSC: Channel Type\nMSC: Speech Codec List (MSC Preferred)\n=>\n{GSM48_CMODE_SPEECH_AMR, FR, S0-S15},\n{GSM48_CMODE_SPEECH_AMR, HR, S0-S15}"]; + + cfg => bsc [label="'bts 0'\n'amr tch-x bts threshold'\n'amr tch-x bts hysteresis'"]; + ms <= bsc [label="RSL CHANnel ACTIVation"]; + ms note bsc [label="Channel Rate and Type: Full/Half rate\nSpeech Coding Algorithm Version: 3 (=AMR)\nMultiRate Configuration:\n- 4.75 | 5.90 | 7.40 | 12.2\n- Threshold / Hysteresis x 3"]; + cfg => bsc [label="'bts 0'\n'amr tch-x ms threshold'\n'amr tch-x ms hysteresis'"]; + ms <= bsc [label="RSL Assignment Command"]; + ms note bsc [label="Channel Description: TCH/F\nSpeech Coding Algorithm Version: 3 (=AMR)\nMultiRate Configuration:\n- 4.75 | 5.90 | 7.40 | 12.2\n- Threshold / Hysteresis x 3"]; + + bsc => __msc [label="BSSMAP Assignment Complete"]; + bsc note __msc [label="Chosen Channel: Speech, Full Rate\nSpeech Version (Chosen): FR3\nSpeech Codec (Chosen): FR AMR, S0-S15"]; + + __msc => sip [label="SDP (optional)"]; + __msc note sip [label="m=audio 12345 RTP/AVP 112\na=rtpmap:112 AMR/8000\na=fmtp:112 mode-set=0,2,4,7"]; +} -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/31616 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I3d63a0d587a43fc18ea54b3982800b19b4d50a08 Gerrit-Change-Number: 31616 Gerrit-PatchSet: 10 Gerrit-Owner: neels <nhofmeyr@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge@osmocom.org> Gerrit-Reviewer: neels <nhofmeyr@sysmocom.de> Gerrit-Reviewer: pespin <pespin@sysmocom.de> Gerrit-MessageType: merged