[L] Change in docker-playground[master]: debian-bullseye-jenkins*: remove - gerrit-log

17 Jul 2026

osmith has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/43076?usp=email )
Change subject: debian-bullseye-jenkins*: remove
......................................................................
debian-bullseye-jenkins*: remove
This container does not build anymore (fails on "License classifiers
have been superseded by license expressions" while installing
lcov-to-cobertura-xml with pip). This means it is unused, remove it.
Change-Id: Iec6ecbc7446aaf3a643aec0168264dba3e671894
---
D debian-bullseye-jenkins-arm/Dockerfile
D debian-bullseye-jenkins-arm/Makefile
D debian-bullseye-jenkins/Dockerfile
D debian-bullseye-jenkins/Makefile
4 files changed, 0 insertions(+), 298 deletions(-)
Approvals:
  daniel: Looks good to me, approved
  Jenkins Builder: Verified
  fixeria: Looks good to me, but someone else must approve

diff --git a/debian-bullseye-jenkins-arm/Dockerfile b/debian-bullseye-jenkins-arm/Dockerfile
deleted file mode 100644
index f18dc61..0000000
--- a/debian-bullseye-jenkins-arm/Dockerfile
+++ /dev/null
@@ -1,79 +0,0 @@
-# Image used to run contrib/jenkins.sh scripts of a few Osmocom projects on
-# arm. Keep this image minimal so the rpis don't need forever to build it.
-# See master-builds.yml, gerrit-verifications.yml in osmo-ci.git.
-
-ARG	DEBIAN_VERSION=bullseye-slim
-ARG	REGISTRY=docker.io
-FROM	${REGISTRY}/debian:${DEBIAN_VERSION}
-# Arguments used after FROM must be specified again
-ARG	OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org"
-ARG	OSMOCOM_REPO_PATH="packages/osmocom:"
-
-# Install apt dependencies (keep in alphabetic order)
-RUN \
-	DEBIAN_FRONTEND=noninteractive apt-get update && \
-	DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
-		autoconf \
-		automake \
-		bzip2 \
-		ca-certificates \
-		ccache \
-		g++ \
-		gcc \
-		git \
-		libboost-dev \
-		libboost-filesystem-dev \
-		libboost-program-options-dev \
-		libboost-thread-dev \
-		libfftw3-dev \
-		libgnutls28-dev \
-		libmnl-dev \
-		libortp-dev \
-		libpcsclite-dev \
-		libsctp-dev \
-		libtalloc-dev \
-		libtool \
-		liburing-dev \
-		libusb-1.0-0-dev \
-		make \
-		pkg-config \
-		python3-minimal \
-		python3-setuptools \
-		sdcc \
-		stow \
-		&& \
-	apt-get clean
-
-# match the outside user
-RUN useradd --uid=1000 build
-
-RUN mkdir /build
-RUN chown build:build /build
-
-# Install osmo-python-tests for python3
-ADD https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/master... /tmp/osmo-python-tests-commit
-RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests3 && \
-	cd osmo-python-tests3 && \
-	python3 setup.py clean build install
-
-# Install osmo-ci.git/scripts to /usr/local/bin
-ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT /tmp/osmo-ci-commit
-RUN git clone https://gerrit.osmocom.org/osmo-ci osmo-ci && \
-	cp -v $(find osmo-ci/scripts \
-		-maxdepth 1 \
-		-type f ) \
-	   /usr/local/bin
-
-# Install packages from Osmocom OBS repositories:
-# * osmo-trx: liblimesuite-dev, libuhd-dev
-ARG	OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/nightly/Debian_10/"
-COPY	.common/Release.key /etc/apt/trusted.gpg.d/obs.osmocom.org.asc
-RUN	echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] " \
-		$OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-nightly.list
-ADD	$OSMOCOM_REPO/Release /tmp/Release
-RUN	apt-get update && \
-	apt-get install -y --no-install-recommends \
-		liblimesuite-dev \
-		libuhd-dev \
-		&& \
-	apt-get clean
diff --git a/debian-bullseye-jenkins-arm/Makefile b/debian-bullseye-jenkins-arm/Makefile
deleted file mode 100644
index c284ded..0000000
--- a/debian-bullseye-jenkins-arm/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-UPSTREAM_DISTRO=debian:bullseye-slim
-DISTRO=debian-bullseye-slim
-include ../make/Makefile
diff --git a/debian-bullseye-jenkins/Dockerfile b/debian-bullseye-jenkins/Dockerfile
deleted file mode 100644
index aadb338..0000000
--- a/debian-bullseye-jenkins/Dockerfile
+++ /dev/null
@@ -1,213 +0,0 @@
-# Image used to run contrib/jenkins.sh scripts of some Osmocom projects.
-# See master-builds.yml, gerrit-verifications.yml in osmo-ci.git.
-
-ARG	DEBIAN_VERSION=bullseye
-ARG	REGISTRY=docker.io
-FROM	${REGISTRY}/debian:${DEBIAN_VERSION}
-# Arguments used after FROM must be specified again
-ARG	OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org"
-ARG	OSMOCOM_REPO_PATH="packages/osmocom:"
-
-# Make "$DEBIAN_VERSION" available after FROM
-# https://docs.docker.com/engine/reference/builder/#understand-how-arg-and-fro...
-ARG DEBIAN_VERSION
-
-# LLVM-embedded-toolchain-for-Arm version
-ARG	LLVM_VERSION="14.0.0"
-
-# Install apt dependencies (keep in alphabetic order)
-RUN \
-	[ "$(arch)" = "x86_64" ] && dpkg --add-architecture i386; \
-	DEBIAN_FRONTEND=noninteractive apt-get update && \
-	DEBIAN_FRONTEND=noninteractive apt-get upgrade -y && \
-	DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
-		asciidoc \
-		asciidoc-dblatex \
-		autoconf \
-		autoconf-archive \
-		automake \
-		bc \
-		bison \
-		bzip2 \
-		ca-certificates \
-		ccache \
-		cmake \
-		coccinelle \
-		cppcheck \
-		dahdi-source \
-		dblatex \
-		dbus \
-		debhelper \
-		devscripts \
-		dh-autoreconf \
-		docbook5-xml \
-		doxygen \
-		flex \
-		g++ \
-		gawk \
-		gcc \
-		gcc-arm-none-eabi \
-		ghostscript \
-		git \
-		git-buildpackage \
-		graphviz \
-		htop \
-		inkscape \
-		iproute2 \
-		latexmk \
-		lcov \
-		libaio-dev \
-		libasound2-dev \
-		libboost-all-dev \
-		libc-ares-dev \
-		libcdk5-dev \
-		libcsv-dev \
-		libdbd-sqlite3 \
-		libdbi-dev \
-		libelf-dev \
-		libffi-dev \
-		libfftw3-dev \
-		libgmp-dev \
-		libgnutls28-dev \
-		libgps-dev \
-		libgsm1-dev \
-		libjansson-dev \
-		liblua5.3-dev \
-		libmnl-dev \
-		libncurses5-dev \
-		libnewlib-arm-none-eabi \
-		libnl-3-dev \
-		libnl-route-3-dev \
-		liboping-dev \
-		libortp-dev \
-		libpcap-dev \
-		libpcsclite-dev \
-		libreadline-dev \
-		libsctp-dev \
-		libsigsegv-dev \
-		libsnmp-dev \
-		libsofia-sip-ua-glib-dev \
-		libsqlite3-dev \
-		libssl-dev \
-		libtalloc-dev \
-		libtinfo5 \
-		libtool \
-		liburing-dev \
-		libusb-1.0-0-dev \
-		libusb-dev \
-		libxml2-utils \
-		libzmq3-dev \
-		locales \
-		lua-socket \
-		make \
-		mscgen \
-		ofono \
-		openssh-client \
-		osc \
-		patchelf \
-		picolibc-arm-none-eabi \
-		pkg-config \
-		pylint \
-		python-setuptools \
-		python2.7 \
-		python3 \
-		python3-cryptography \
-		python3-gi \
-		python3-mako \
-		python3-nwdiag \
-		python3-pip \
-		python3-pyflakes \
-		python3-setuptools \
-		python3-usb \
-		python3-yaml \
-		rsync \
-		sdcc \
-		source-highlight \
-		sqlite3 \
-		stow \
-		sudo \
-		systemd \
-		tcpdump \
-		tex-gyre \
-		texinfo \
-		unzip \
-		wget \
-		xsltproc
-
-RUN	set -x && \
-	[ "$(arch)" = "x86_64" ] || exit 0; \
-	wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/dow... && \
-	tar -xf LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && \
-	rm LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && \
-	mv LLVMEmbeddedToolchainForArm-${LLVM_VERSION} /opt/llvm-arm && \
-	/opt/llvm-arm/bin/clang --version && \
-	/opt/llvm-arm/bin/clang --print-targets
-
-# Install pip dependencies (keep in alphabetic order)
-RUN pip3 install \
-	'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \
-	'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' \
-	'git+https://github.com/podshumok/python-smpplib.git' \
-	'pydbus' \
-	'pysispm' \
-	'sphinx' \
-	'sphinxcontrib-napoleon' \
-	'swig'
-ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt
-RUN pip3 install -r /tmp/pysim_requirements.txt
-
-# match the outside user
-RUN useradd --uid=1000 build
-#RUN echo "build ALL=(ALL) NOPASSWD:ALL" > /etc/sudoers.d/build
-
-RUN mkdir /build
-RUN chown build:build /build
-
-# Install osmo-python-tests for python2 (OS#5950)
-ARG OSMO_PYTHON2_TESTS_COMMIT=fb4b813d4df62b7b2445bdced961eb1847267eed
-RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests2 && \
-	cd osmo-python-tests2 && \
-	git checkout $OSMO_PYTHON2_TESTS_COMMIT && \
-	python2 setup.py clean build install
-
-# Install osmo-python-tests for python3
-ADD https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/master... /tmp/osmo-python-tests-commit
-RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests3 && \
-	cd osmo-python-tests3 && \
-	python3 setup.py clean build install
-
-# Install osmo-ci.git/scripts to /usr/local/bin
-ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT /tmp/osmo-ci-commit
-RUN git clone https://gerrit.osmocom.org/osmo-ci osmo-ci && \
-	cp -v $(find osmo-ci/scripts \
-		-maxdepth 1 \
-		-type f ) \
-	   /usr/local/bin
-
-# Install osmo-gsm-manuals to /opt/osmo-gsm-manuals
-ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format=... /tmp/osmo-gsm-manuals-commit
-RUN git -C /opt clone https://gerrit.osmocom.org/osmo-gsm-manuals
-
-# Set a UTF-8 locale
-RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && \
-    dpkg-reconfigure --frontend=noninteractive locales && \
-    update-locale LANG=en_US.UTF-8
-ENV LANG en_US.UTF-8
-
-# Install packages from Osmocom OBS repositories:
-# * osmo-remsim: libulfius
-# * osmo-trx: liblimesuite-dev, libuhd-dev
-ARG	OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/nightly/Debian_11/"
-COPY	.common/Release.key /usr/share/keyrings/osmocom-nightly.asc
-RUN	echo "deb [signed-by=/usr/share/keyrings/osmocom-nightly.asc] $OSMOCOM_REPO ./" \
-		> /etc/apt/sources.list.d/osmocom-nightly.list
-ADD	$OSMOCOM_REPO/Release /tmp/Release
-RUN	apt-get update && \
-	apt-get install -y --no-install-recommends \
-		liblimesuite-dev \
-		libuhd-dev \
-		libulfius-dev && \
-	apt-get clean
-
-# osmo-python-tests' contrib/jenkins.sh writes to /usr/local as user
-RUN chown -R build:build /usr/local
diff --git a/debian-bullseye-jenkins/Makefile b/debian-bullseye-jenkins/Makefile
deleted file mode 100644
index 736769d..0000000
--- a/debian-bullseye-jenkins/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-UPSTREAM_DISTRO=debian:bullseye
-DISTRO=debian-bullseye
-include ../make/Makefile
-- 
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/43076?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email

Gerrit-MessageType: merged
Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Iec6ecbc7446aaf3a643aec0168264dba3e671894
Gerrit-Change-Number: 43076
Gerrit-PatchSet: 1
Gerrit-Owner: osmith osmith@sysmocom.de
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel dwillmann@sysmocom.de
Gerrit-Reviewer: fixeria vyanitskiy@sysmocom.de
Gerrit-Reviewer: osmith osmith@sysmocom.de



    