[EGPRS] Performance results for EGPRS test in Radisys lab

Max msuraev at sysmocom.de
Thu Jul 21 11:22:14 UTC 2016


Thanks for sharing the results.

What about MCS UL? Do you have some statistics which one has been used
and if it has changed during the test? Same question regarding the
throughput etc.

On 07/15/2016 04:25 PM, Saurabh Sharan wrote:
> Hello,
> We have completed first phase of performance test on EGPRS using iperf tool for short duration runs (1 to 3 hours). 
> Steady throughput of 215 to 223 kbps in Downlink has been achieved under lab conditions over the air test using one Huawei E398 dongle as UE.
> PCU was configured for 4 PDTCH allocation.
> Osmo-pcu is based on master branch plus Radisys code changes which are currently under Gerrit review.
> The execution of test was done on NuRAN 1.0 hardware.
>
> Below is a summary of test results
> Test type	MCS DL		Duration		Throughput(kbps)
> 						Achieved	Theoretical
> TCP		MCS9		1hour		217		236.8
> UDP		MCS9		3hour		223		236.8
>
> Regards
> Saurabh

-- 
Max Suraev <msuraev at sysmocom.de> http://www.sysmocom.de/
======================================================================= 
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93 
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B 
* Geschaeftsfuehrer / Managing Director: Harald Welte 



More information about the osmocom-net-gprs mailing list