This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Mirko Kovacevic northmirko at gmail.comHi, Вадим, Tomi thank you for your answers. I suspected toolchain from early beginning because two years ago I managed to make things work. I primarily followed procedure from this link http://bb.osmocom.org/trac/wiki/Tutorials/CalypsoBTS. When I do steps with OsmoBTS: *git clone git://git.osmocom.org/osmo-bts.git <http://git.osmocom.org/osmo-bts.git> * *cd osmo-bts autoreconf -i ./configure --enable-trx make sudo make install* Then I can't use *osmo-bts.cfg* in this form: *bts 0 band DCS1800 ipa unit-id 1801 0 oml remote-ip 127.0.0.1 rtp jitter-buffer 0 paging queue-size 200 paging lifetime 0 fn-advance 30 ms-power-loop -60 timing-advance-loop settsc setbsic trx 0 rxgain 0 power 0 slotmask 1 0 0 0 0 0 0 0* specified from mentioned URL. Also new OsmoBTS binary is not called *osmobts-trx, *but *osmo-bts-trx* and expect to use new kind of *osmo-bts.cfg* format. *Maybe I should checkout some other branch from * *git clone git://git.osmocom.org/osmo-bts.git <http://git.osmocom.org/osmo-bts.git> ?* *Поздрав,Мирко К.* On Tue, Feb 23, 2016 at 8:32 AM, Вадим Яницкий <axilirator at gmail.com> wrote: > Hi! > > >> Can we still use osmocomBB phones (C140,C139..) with Osmo-BTS project? > > > Yes. > > I use transceiver program from *jolly/testing* branch and >> firmware in compal_86 ( trx.highram.bin ) from *sylvian/testing* branch, >> all from osmocomBB. >> >> > Stop doing this mix. The firmware from one branch you use incompatible > with host software form another. Use one branch only! > It looks like you have a new toolchain "gnu-arm-build.3.sh". The firmware > images from this branches works better if it's compiled with older > toolchain version. > Try to use > http://bb.osmocom.org/trac/attachment/wiki/GnuArmToolchain/gnu-arm-build.2.sh > or https://github.com/axilirator/gnu-arm-installer. > > I know that Calypso BTS support only one timeslot. >> >> > Using two phones you will be able to serve two timeslots. > > Follow this guide I recently wrote: > http://bb.osmocom.org/trac/wiki/Tutorials/CalypsoBTS > http://openbsc.osmocom.org/trac/wiki/SDR_OsmoTRX_network_from_scratch is > outdated. > > С наилучшими пожеланиями, > Яницкий Вадим. > -- *Puno pozdrava,Mirko Kovacevic* -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20160223/adac251a/attachment.htm>