doesn't get output from osmocon
n0p [Luis Bernal]
lbernal at gmail.com
Fri Jan 28 22:25:30 UTC 2011
another way is to shortcut the tip and middle ring of the connector, open a
serial terminal and see if it echoes back what you type in
2011/1/28 <ml at mail.tsaitgaist.info>
> first test if the cable is working. a fast but dirty way is to rub the
> tip with your fingers. this generates noise that should show some random
> input in osmocon.
> also but sure to not charge the phone while using osmocon, this can
> inhibit the ram loader.
> good luck,
> On 01/28/2011 08:09 PM, tobsen wrote:
> > Hi,
> > sorry if I shouldn`t write correclly, i`m not that good in english.
> > i have a Motorola c118 and this usb/serial cable:
> > http://www.gsmbase.de/shop/show_product.php?products_id=620 here
> > my problem:
> > compiling was successfully.
> > than i run osmocon:
> > ./osmocon -p /dev/ttyUSB0 -m c123xor
> > i pressed power on the phone.
> > nothing happend.
> > again.
> > nothing happend, no output, no upload/download to/from the phone...
> > what is my fault? can you help me?
> > i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing)
> > my system is ubuntu 10.10 (not in a virtual box or something else).
> > thanks a lot,
> > tobsen
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the baseband-devel