This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Nathan Fain nat at fains.comOn Sun, 14 Mar 2010 16:28:42 +0100, Holger Freyther <zecke at selfish.org> wrote: > On Sunday 14 March 2010 16:04:03 Nathan Fain wrote: > Yes, we turn the file descriptor into non blocking mode and then the write > might fail as we write too early. A patch to turn this code into to use > the > write_queue would be totally nice... or at least respond to PROMPT from > within > a ready write. that is doable and i will see if I can contribute soon (weekends almost over :/ ). because i was on the python route I went ahead and wrote code all the way through uploading. I was expecting I would get a NACK but instead I get neither a NACK nor ACK but the following response after uploading hello world. Just curious if anyone has ever seen this before: ?BDLENA time negative (%d) BROWNOUT!1!ssd1783Error: CFI query signature not found %08x size %08x Locking down block at 0x%08x Flash Manufacturer ID: %04x Flash Device ID: %04x Flash Size: 0x%08x bytes Primary Algorithm ID: %04x Primary Extended Query: %04x Alternate Algorithm ID: %04x Alternate Extended Query: %04x Block Erase Typical: %u ms Block Erase Maximum: %u ms Word Program Typical: %u us Word Program Maximum: %u us -- cyphunk://cypherpoet.com nathan://squimp.com fain://deadhacker.com