This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/simtrace@lists.osmocom.org/.
"Roger Jardi Cedó" roger.jardi at urv.catHello, I'm sorry, I wanted to refer to ISO 7816-3 smart card (T=0 and T=1) like Java Card. > no, not any. It only supports T=0 and T=1 (with few adjustments). > This protocols are defined in IEC/ISO-7816 part 3. > Other Smart cards can use other protocols (I2C, SPI, …). It may > be possible to be compatible with it, but these are not > supported by the software. So, what kind of adjustments are these? Could you please detail them? Thank you!!! Roger. ----- Missatge original ----- De: Kevin Redon <ml at mail.tsaitgaist.info> Data: Dimarts, Novembre 13, 2012 21:42 Assumpte: Re: T=0 and T=1 sniffer Per a: simtrace <simtrace at lists.osmocom.org> > Hi, > > Excerpts from Roger Jardi Cedó's message of Tue Nov 13 17:45:40 > +0100 2012: > > Dear all, > > > > I'am new in this mailing list. > > > > I'am a PhD. student at the University Rovira i Virgili > studying smart cards (SC). I would like to log transmitted apdus > between reader and SC (like credit card, ID card, sim, etc). > > > > I've recently bought a cheap sniffer (season interface) but I > have problems with it, I lose data sniffing any smart card type > (iso-7816). > > > > I'm asking if your device (v1.1) is valid for this purpose. > Note that v2 would be compatible with credit card sized smart > cards (ID-1 and ID-000 smart card slots (with presence > detection): so to be able to also sniff credit card sized smart > cards). > SIMtrace v2 has no release date and is not currently being > developed on. Thus stay with the current version (v1.2). > > > However, I've read too that v1.1 is capable to read smart card > with both modes (T=0 and T=1) with proper accessories > (http://shop.sysmocom.de/products/fullsize-sim-fpc and > http://shop.sysmocom.de/products/sim-adapter). > > Yes, this is what you need for credit card size connectivity. > > > > > It is possible? With this device, I will log any smart card type? > > no, not any. It only supports T=0 and T=1 (with few adjustments). > This protocols are defined in IEC/ISO-7816 part 3. > Other Smart cards can use other protocols (I2C, SPI, …). It may > be possible to be compatible with it, but these are not > supported by the software. > > kevin > Roger Jardí Personal de Suport a la Recerca Grup de recerca CRISES Departament d'Enginyeria Informàtica i Matemàtiques Universitat Rovira i Virgili Despatx 132 Av. Països Catalans 26 43007 TARRAGONA Tel. +34 977 55 82 70 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20121113/763743ee/attachment.htm>