No output when tracing a Gemalto Cryptoflex ,NET card

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/simtrace@lists.osmocom.org/.

Holger Hans Peter Freyther holger at freyther.de
Mon Jan 16 17:33:05 UTC 2012


On 01/16/2012 06:05 PM, jeremy brookfield wrote:
>


> My machine is running ubuntu 11.10. The toolchain is arm-elf-toolchain downloaded from the brung ppa (as per the instructions on your wiki) No errors were reported in the build.
>
> I then tried with unmodified firmware from the GIT repository. Same result.

Hmm, this ubuntu-ppa builds quite an old gcc and "known-to-work" probably only 
applied to osmocomBB at some point. I have compiled 0.4+ with the attached diff.

For your broken firmware, do you get proper output on the serial console? does 
the firmware even boot? does the red LED turn on?


>
> The simtrace program comes from your ppa.

holger

-------------- next part --------------
A non-text attachment was scrubbed...
Name: dfu.bin
Type: application/octet-stream
Size: 16384 bytes
Desc: not available
URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20120116/4244339a/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: main_simtrace.bin
Type: application/octet-stream
Size: 20648 bytes
Desc: not available
URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20120116/4244339a/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: simtrace.diff
Type: text/x-diff
Size: 543 bytes
Desc: not available
URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20120116/4244339a/attachment-0002.bin>


More information about the simtrace mailing list