This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Dimitri Stolnikov horiz0n at gmx.netHi Qiuyue, On Thu, 09 Mar 2017 16:39:34 +0100, XueQiuyue <qiuyuexue at icloud.com> wrote: > Dear Mr/Ms, > > I meet errors when use osmocom sink and source in GNU Radio, I have > tried BladeRF and HackRF, and I use Ubuntu 16.04. > > 1.When I use BladeRF, I set the parameters as > "bladerf=701c2ce1da297914cb29695ba79fac54,fpga=<'/Users/qiuyuexue/Documents/BladeRF/hostedx115-latest.rbf'>,fpga-reload=1,buffers=32,buflen=4096,transfers=16,stream_timeout_ms=3000,loopback=none,verbosity=silent,xb200.” You have to remove <' and '> from the filename. > 2.when I use HackRF, I set the parameter as > "hackrf=393b4b,bias=1,bias_tx=1,buffers=32.” > > and I got error as: > "(top_block.py:5108): IBUS-WARNING **: The owner of > /home/ceca_517/.config/ibus/bus is not root! > gr-osmosdr v0.1.4-86-ge9dde9af (0.1.5git) gnuradio 3.7.10 > built-in sink types: hackrf bladerf redpitaya file > > FATAL: bad lexical cast: source type value could not be interpreted as > target Remove the dot after 32, its supposed to be an integer value. Best regards, Dimitri