This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-net-gprs@lists.osmocom.org/.
Ron ron.menez at entropysolution.comHi Community, We were able to remove the error logs flooding in OSMO-PCU by upgrading to the latest version of OSMO Elements and doing the IPV4 forwarding and masquerading ad-hoc as per OpenGGSN documentation (“http://ftp.osmocom.org/docs/latest/osmoggsn-usermanual.pdf”). Now, UE still not able to obtain an IP address. We made the “auth-policy accept-all” in OSMO-SGSN to accept all request. Below are the ifconfig and config files used for the testing. IFCONFIG: # ifconfig apn0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.42.0 P-t-P:192.168.42.0 Mask:255.255.255.0 UP POINTOPOINT RUNNING MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) enp0s25 Link encap:Ethernet HWaddr b8:ae:ed:7c:eb:f0 inet addr:192.168.1.175 Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::baae:edff:fe7c:ebf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:622663 errors:0 dropped:0 overruns:0 frame:0 TX packets:605604 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:902447377 (902.4 MB) TX bytes:897214804 (897.2 MB) Interrupt:20 Memory:aa100000-aa120000 enp0s25.60 Link encap:Ethernet HWaddr b8:ae:ed:7c:eb:f0 inet addr:192.168.10.3 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::baae:edff:fe7c:ebf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:603890 errors:0 dropped:0 overruns:0 frame:0 TX packets:600040 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:880955628 (880.9 MB) TX bytes:891260801 (891.2 MB) enp0s25.80 Link encap:Ethernet HWaddr b8:ae:ed:7c:eb:f0 inet addr:192.168.1.170 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::baae:edff:fe7c:ebf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18701 errors:0 dropped:0 overruns:0 frame:0 TX packets:5462 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7789419 (7.7 MB) TX bytes:1101655 (1.1 MB) OSMO-HLR: # more osmo-hlr.cfg log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-MGW: # more osmo-mgw-for-bsc.cfg mgcp bind ip 192.168.1.170 # default port is 2427 (is used for MSC's MGW) bind port 12427 line vty # default VTY interface is on 127.0.0.1 (used for MSC's MGW) bind 127.0.0.2 log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-STP: # more osmo-stp.cfg cs7 instance 0 xua rkm routing-key-allocation dynamic-permitted listen m3ua 2905 accept-asp-connections dynamic-permitted log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-GGSN: # more osmo-ggsn.cfg log stderr logging level all debug logging filter all 1 logging print category 1 ggsn ggsn0 gtp bind-ip 192.168.1.175 apn internet tun-device apn0 type-support v4 ip dns 0 192.168.1.1 ip dns 1 8.8.8.8 ip ifconfig 192.168.42.0/24 ip prefix dynamic 192.168.42.0/24 no shutdown default-apn internet no shutdown ggsn log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-HNBGW: # more osmo-hnbgw.cfg hnbgw iuh local-ip 192.168.1.170 log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-SGSN: # more osmo-sgsn.cfg sgsn gtp local-ip 192.168.1.170 ggsn 0 remote-ip 192.168.1.175 ggsn 0 gtp-version 1 auth-policy accept-all gsup remote-ip 127.0.0.1 ns encapsulation udp local-ip 192.168.1.170 encapsulation udp local-port 23001 encapsulation framerelay-gre enabled 0 log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-MSC: # more osmo-msc.cfg network network country code 515 mobile network code 94 short name testNETWORK long name testNETWORK encryption a5 0 ! encryption a5 1 msc mgw remote-ip 192.168.1.170 log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 logging level ref debug OSMO-BSC: # more osmo-bsc.cfg network network country code 515 mobile network code 94 encryption a5 0 ! encryption a5 1 bts 0 type sysmobts band GSM900 location_area_code 23 ip.access unit_id 0 0 gprs mode gprs gprs nsvc 0 remote ip 192.168.1.170 gprs nsvc 0 remote udp port 23001 gprs nsvc 0 local udp port 23000 gprs nsvc 0 nsvci 1800 gprs nsei 1800 gprs cell bvci 1800 trx 0 rf_locked 0 arfcn 115 nominal power 23 timeslot 0 phys_chan_config CCCH+SDCCH4 timeslot 1 phys_chan_config SDCCH8 timeslot 2 phys_chan_config TCH/F_TCH/H_PDCH timeslot 3 phys_chan_config TCH/F_TCH/H_PDCH timeslot 4 phys_chan_config TCH/F_TCH/H_PDCH timeslot 5 phys_chan_config TCH/F_TCH/H_PDCH timeslot 6 phys_chan_config TCH/F_TCH/H_PDCH timeslot 7 phys_chan_config PDCH e1_input e1_line 0 driver ipa msc 0 mgw remote-ip 192.168.1.170 mgw remote-port 12427 allow-emergency deny codec-list hr3 log stderr logging print extended-timestamp 1 logging level all debug logging filter all 1 logging print category 1 OSMO-TRX: # more osmo-trx-umtrx.cfg log stderr logging filter all 1 logging color 1 logging print category 1 logging timestamp 1 logging print file basename logging level all info ! line vty no login ! trx bind-ip 127.0.0.1 remote-ip 127.0.0.1 base-port 5700 dev-args addr=192.168.10.2,pa=NONE,pa_power_max_dbm=23,fifo_ctrl_window=0,status_port=12345 ! egprs enable tx-sps 4 rx-sps 4 rssi-offset 38 rt-prio 18 chan 0 OSMO-PCU: # more osmo-pcu.cfg !pcu ! flow-control-interval 10 ! cs 2 ! alloc-algorithm dynamic ! alpha 0 ! gamma 0 pcu flow-control-interval 10 cs 2 alloc-algorithm dynamic alpha 0 gamma 0 two-phase-access Best Regard, Ron Menez ron.menez at entropysolution.com<mailto:ron.menez at entropysolution.com> On Aug 10, 2018, at 11:48 PM, Ron <ron.menez at entropysolution.com<mailto:ron.menez at entropysolution.com>> wrote: Hi Community, We tried to used the GPRS capability of OSMOCOM. Installation and configuration were based in the URL provided below: https://osmocom.org/projects/cellular-infrastructure/wiki/Osmocom_Network_In_The_Box#OsmoBTS We successfully installed the needed elements to run GPRS and we were able to run the following: osmo-msc osmo-stp osmo-hnbgw (optional) osmo-ggsn osmo-sgsn osmo-mgw osmo-bsc osmo-trx-uhd osmo-hlr osmo-pcu UE were able to camp but IP Address is unavailable (checked it under Settings > About Phone > Status) No session / request coming in the OSMO-SGSN. We are also flooded with this log in OSMO-PCU: <000c> gprs_bssgp_pcu.cpp:848 Sending unblock on BVCI 1800 <000c> gprs_bssgp_bss.c:274 BSSGP (BVCI=1800) Tx BVC-BLOCK <000c> gprs_bssgp.c:288 Cell 001-01-23-0 CI 0 on BVCI 1800 <000c> gprs_bssgp_bss.c:294 BSSGP (BVCI=1800) Tx BVC-RESET CAUSE=O&M intervention <000c> gprs_bssgp.c:550 BSSGP BVCI=0 Rx BVC STATUS, cause=Protocol error - unspecified <000c> gprs_bssgp_pcu.cpp:354 Rx BSSGP BVCI=0 (SIGN) PDU type BVC-UNBLOCK unknown <000c> gprs_bssgp_util.c:238 BSSGP BVCI=0 Tx STATUS, cause=Protocol error - unspecified <000c> gprs_bssgp_pcu.cpp:304 Rx BSSGP BVCI=0 (SIGN) BVC_RESET_ACK <000c> gprs_bssgp_pcu.cpp:848 Sending unblock on BVCI 1800 <000c> gprs_bssgp_bss.c:274 BSSGP (BVCI=1800) Tx BVC-BLOCK <000c> gprs_bssgp.c:288 Cell 001-01-23-0 CI 0 on BVCI 1800 <000c> gprs_bssgp_bss.c:294 BSSGP (BVCI=1800) Tx BVC-RESET CAUSE=O&M intervention <000c> gprs_bssgp.c:550 BSSGP BVCI=0 Rx BVC STATUS, cause=Protocol error - unspecified <000c> gprs_bssgp_pcu.cpp:354 Rx BSSGP BVCI=0 (SIGN) PDU type BVC-UNBLOCK unknown <000c> gprs_bssgp_util.c:238 BSSGP BVCI=0 Tx STATUS, cause=Protocol error - unspecified <000c> gprs_bssgp_pcu.cpp:304 Rx BSSGP BVCI=0 (SIGN) BVC_RESET_ACK <000c> gprs_bssgp_pcu.cpp:848 Sending unblock on BVCI 1800 <000c> gprs_bssgp_bss.c:274 BSSGP (BVCI=1800) Tx BVC-BLOCK <000c> gprs_bssgp.c:288 Cell 001-01-23-0 CI 0 on BVCI 1800 <000c> gprs_bssgp_bss.c:294 BSSGP (BVCI=1800) Tx BVC-RESET CAUSE=O&M intervention <000c> gprs_bssgp.c:550 BSSGP BVCI=0 Rx BVC STATUS, cause=Protocol error - unspecified <000c> gprs_bssgp_pcu.cpp:354 Rx BSSGP BVCI=0 (SIGN) PDU type BVC-UNBLOCK unknown <000c> gprs_bssgp_util.c:238 BSSGP BVCI=0 Tx STATUS, cause=Protocol error - unspecified <000c> gprs_bssgp_pcu.cpp:304 Rx BSSGP BVCI=0 (SIGN) BVC_RESET_ACK Any suggestion / comments what seems to be the problem with our setup? TIA. Best Regard, Ron Menez ron.menez at entropysolution.com<mailto:ron.menez at entropysolution.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/osmocom-net-gprs/attachments/20180824/debaa3c0/attachment.htm>