This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-net-gprs@lists.osmocom.org/.
Max msuraev at sysmocom.deHi. While looking at http://projects.osmocom.org/issues/1616 I've noticed that there seems to be no particular function which get signal quality info from dsp. At least looking at code around ENABLE_DIRECT_PHY have not enlightened me so far. The question is - how exactly signal quality is obtained from dsp (on hw with direct dsp access) to osmo-pcu. There is clear difference between l1if_pdch_req() and pcu_tx_data_req() on TX path but what's the equivalent for RX? -- Max Suraev <msuraev at sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte