This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Keith keith at rhizomatica.orgOn 29/07/2021 00:33, Sonny Lafuente wrote: > > > the MS power transmit is not changing during ongoing call and the > value is 5dbm. . > [...] > > RXL-FULL-dl: -47 dBm, RXL-SUB-dl: -47 dBm RXQ-FULL-dl: 0, > RXQ-SUB-dl: 0 > RXL-FULL-ul: -47 dBm, RXL-SUB-ul: -47 dBm RXQ-FULL-ul: 0, > RXQ-SUB-ul: 0 > uplink-power-target -75 Well, As long as you are getting -47dB on the UL, and the UL power target is -75dB the MS is not going to be instructed to increase TX power. ms max power is the max power the MS uses for initial access to the cell. After that, the power control kicks in and tells tells the MS to drop down. Put some serious attenuation on your UL (or put your MS in a tinfoil bag or something, so that you get less than your uplink-power-target and see if MS power increases on your show lchan (or better - configure the meas-feed and use meas-vis or try using this: https://gitlab.tic-ac.org/keith/meas_web -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20210729/c4ee5073/attachment.htm>