This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sonny Lafuente sonny.lafuente at entropysolution.comHello Neels and Community, Good day! We are doing some testing on our Lab specifically in Voice. During this testing we observed that the MS power transmit is not changing during ongoing call and the value is 5dbm. We also do walk test in order to lower the received power level and to observed if the MS Transmit power will increase. We tried to change some parameters in osmo-bts-trx uplink-power-target but however, the MS Transmit power still the same which is 5dbm. The MS power in the osmo-nitb config is set to 23dbm. Below is the version and configuration we used on our testing in Lab. Version: OpenBSC# show version OpenBSC 1.3.2.2-d2550 (OpenBSC). Copyright (C) 2008-2016 Harald Welte, Holger Freyther Contributions by Daniel Willmann, Jan Lübbe, Stefan Schmidt Dieter Spaar, Andreas Eversberg, Sylvain Munaut, Neels Hofmeyr License AGPLv3+: GNU AGPL version 3 or later <http://gnu.org/licenses/agpl-3.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. OpenBSC# OsmoBTS# show version OsmoBTS 1.2.0.48-6392 (OsmoBTS). Copyright (C) 2010, 2011 by Harald Welte, Andreas Eversberg and On-Waves License AGPLv3+: GNU AGPL version 3 or later <http://gnu.org/licenses/agpl-3.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. OsmoBTS# Logs: OpenBSC# show lchan BTS 0, TRX 1, Timeslot 0, Lchan 0: Type SDCCH Connection: 1, State: ACTIVE BS Power: 0 dBm, MS Power: 23 dBm Channel Mode / Codec: signalling Subscriber: ID: 1816, Authorized: 0 Extension: 164324 IMSI: 515039102991665 Use count: 1 Bound IP: 0.0.0.0 Port 0 RTP_TYPE2=0 CONN_ID=0 Measurement Report: Flags: DLinval RXL-FULL-ul: -50 dBm, RXL-SUB-ul: -50 dBm RXQ-FULL-ul: 7, RXQ-SUB-ul: 7 BTS 0, TRX 1, Timeslot 6, Lchan 0: Type TCH_F Connection: 1, State: ACTIVE BS Power: 0 dBm, MS Power: 23 dBm Channel Mode / Codec: FR or HR Subscriber: ID: 1782, Authorized: 1 Extension: 05837654321 IMSI: 515032920153135 Use count: 2 Bound IP: X.X.X.X Port 16386 RTP_TYPE2=0 CONN_ID=0 Measurement Report: Flags: MS Timing Offset: 0 L1 MS Power: 5 dBm, Timing Advance: 0 RXL-FULL-dl: -47 dBm, RXL-SUB-dl: -47 dBm RXQ-FULL-dl: 0, RXQ-SUB-dl: 0 RXL-FULL-ul: -47 dBm, RXL-SUB-ul: -47 dBm RXQ-FULL-ul: 0, RXQ-SUB-ul: 0 BTS 0, TRX 1, Timeslot 7, Lchan 0: Type TCH_F Connection: 1, State: ACTIVE BS Power: 0 dBm, MS Power: 23 dBm Channel Mode / Codec: FR or HR Subscriber: ID: 4, Authorized: 1 Extension: 05831234567 IMSI: 515032919099978 Use count: 2 Bound IP: X.X.X.X Port 16384 RTP_TYPE2=0 CONN_ID=0 Measurement Report: Flags: MS Timing Offset: 0 L1 MS Power: 5 dBm, Timing Advance: 0 RXL-FULL-dl: -47 dBm, RXL-SUB-dl: -47 dBm RXQ-FULL-dl: 4, RXQ-SUB-dl: 5 RXL-FULL-ul: -47 dBm, RXL-SUB-ul: -47 dBm RXQ-FULL-ul: 7, RXQ-SUB-ul: 7 OpenBSC# Ongoing Call Logs: OpenBSC# show lchan summary BTS 0, TRX 1, Timeslot 6 TCH/F, Lchan 0, Type TCH_F, State ACTIVE - L1 MS Power: 5 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm BTS 0, TRX 1, Timeslot 7 TCH/F, Lchan 0, Type TCH_F, State ACTIVE - L1 MS Power: 5 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm OpenBSC# Osmo-BTS current config: e1_input e1_line 0 driver ipa e1_line 0 port 0 no e1_line 0 keepalive phy 0 osmotrx ip local 127.0.0.1 osmotrx ip remote 127.0.0.1 no osmotrx ms-power-loop osmotrx base-port local 5800 osmotrx base-port remote 5700 osmotrx fn-advance 20 osmotrx rts-advance 5 instance 0 osmotrx rx-gain 0 osmotrx tx-attenuation 13 osmotrx maxdly 0 instance 1 osmotrx rx-gain 0 osmotrx tx-attenuation 10 osmotrx maxdly 0 bts 0 band GSM900 ipa unit-id 1000 0 oml remote-ip x.x.x.x rtp jitter-buffer 100 paging queue-size 200 paging lifetime 0 uplink-power-target -75 gsmtap-sapi ccch gsmtap-sapi pdtch min-qual-rach 50 min-qual-norm -5 max-ber10k-rach 1707 trx 0 power-ramp max-initial 0 mdBm power-ramp step-size 2000 mdB power-ramp step-interval 1 ms-power-control dsp phy 0 instance 0 trx 1 power-ramp max-initial 0 mdBm power-ramp step-size 2000 mdB power-ramp step-interval 1 ms-power-control dsp phy 0 instance 1 Osmo-Nitb Current Config: root at ubuntu:/etc/osmocom# cat osmo-nitb.cfg ! log stderr logging filter all 1 logging color 1 logging print category 0 logging timestamp 1 logging level all everything logging level rll notice logging level cc notice logging level mm notice logging level rr notice logging level rsl notice logging level nm info logging level mncc notice logging level pag notice logging level meas notice logging level sccp notice logging level msc notice logging level mgcp notice logging level ho notice logging level db notice logging level ref notice logging level gprs debug logging level ns info logging level bssgp debug logging level llc debug logging level sndcp debug logging level nat notice logging level ctrl notice logging level smpp debug logging level filter debug logging level ranap debug logging level sua debug logging level pcu debug logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice ! stats interval 5 ! line vty no login ! e1_input e1_line 0 driver ipa e1_line 0 port 0 no e1_line 0 keepalive network network country code 10 mobile network code 1 short name testnetwork long name testnetwork auth policy closed authorized-regexp .* location updating reject cause 13 encryption a5 0 neci 1 paging any use tch 0 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3113 60 timer t3103 1 timer t3101 10 timer t3109 1 timer t3122 10 timer t3105 1 dyn_ts_allow_tch_f 0 subscriber-keep-in-ram 1 bts 0 type sysmobts band GSM900 cell_identity 1 location_area_code 1 base_station_id_code 63 ms max power 23 cell reselection hysteresis 4 rxlev access min 0 periodic location update 30 radio-link-timeout 32 channel allocator descending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending forbidden ip.access unit_id 1000 0 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr hr efr amr amr tch-h modes 0 amr tch-h start-mode auto gprs mode gprs gprs 11bit_rach_support_for_egprs 0 gprs routing area 1 gprs network-control-order nc0 gprs cell bvci 2 gprs cell timer blocking-timer 3 gprs cell timer blocking-retries 3 gprs cell timer unblocking-retries 3 gprs cell timer reset-timer 3 gprs cell timer reset-retries 3 gprs cell timer suspend-timer 10 gprs cell timer suspend-retries 3 gprs cell timer resume-timer 10 gprs cell timer resume-retries 3 gprs cell timer capability-update-timer 10 gprs cell timer capability-update-retries 3 gprs nsei 101 gprs ns timer tns-block 3 gprs ns timer tns-block-retries 3 gprs ns timer tns-reset 3 gprs ns timer tns-reset-retries 3 gprs ns timer tns-test 30 gprs ns timer tns-alive 3 gprs ns timer tns-alive-retries 10 gprs nsvc 0 nsvci 101 gprs nsvc 0 local udp port 23000 gprs nsvc 0 remote udp port 23000 gprs nsvc 0 remote ip 127.0.0.2 gprs nsvc 1 nsvci 0 gprs nsvc 1 local udp port 0 gprs nsvc 1 remote udp port 0 gprs nsvc 1 remote ip 0.0.0.0 no force-combined-si trx 0 rf_locked 0 arfcn 122 nominal power 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config SDCCH8 hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 trx 1 rf_locked 0 arfcn 42 nominal power 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 mncc-int default-codec tch-f fr default-codec tch-h amr nitb subscriber-create-on-demand subscriber-create-on-demand random 100000 199999 no assign-tmsi smpp local-tcp-ip 127.0.0.1 2776 system-id password policy closed smpp-first esme admin password password default-route Rootubuntu:/etc/osmocom# Regards, Sonny Lafuente | Systems Engineer | Entropy Solution Philippines Mobile: +639985365206 | Office: 028931781 | Email: sonny.lafuente at entropysolution.com<mailto:sonny.lafuente at entropysolution.com> Office Address: Unit 2103 Antel Corporate Centre 121 Valero St. Salcedo Village Makati City Philippines 1227 [cid:936BCCE1-8AAB-4E96-8413-E1075D00DBE3] Singapore * Philippines Products: Gridloc*Intelle*Hype*Lighthouse*Telco Services*Software Development This email (including any attachment to it) is confidential and intended only for the use of the individual named above and may contain information that is privileged. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email or telephone and destroy the original message (including any attachment to it). Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20210729/c1d6090c/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: Entropy Logo Email.png Type: image/png Size: 57183 bytes Desc: Entropy Logo Email.png URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20210729/c1d6090c/attachment.png>