Regarding Programming SIM cards

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Ferdaus, Farah ff1016 at wildcats.unh.edu
Wed Jun 13 16:41:30 UTC 2018


Dear Domi,
Thank you for your kind reply and suggestions. Now I am using this Insten_USB_SIM_Card_Writer<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_Insten-2DReader-2DWriter-2DBackup-2DPhone_dp_B0188GHIP2_ref-3Dpd-5Fsbs-5F147-5F1-3F-5Fencoding-3DUTF8-26pd-5Frd-5Fi-3DB0188GHIP2-26pd-5Frd-5Fr-3D7814918c-2D6ce3-2D11e8-2D8c85-2D6f6601b90f74-26pd-5Frd-5Fw-3DuWdRH-26pd-5Frd-5Fwg-3DJuNOy-26pf-5Frd-5Fi-3Ddesktop-2Ddp-2Dsims-26pf-5Frd-5Fm-3DATVPDKIKX0DER-26pf-5Frd-5Fp-3D5825442648805390339-26pf-5Frd-5Fr-3DKR5JHK6G2A4ATF92VJ6S-26pf-5Frd-5Fs-3Ddesktop-2Ddp-2Dsims-26pf-5Frd-5Ft-3D40701-26psc-3D1-26refRID-3DKR5JHK6G2A4ATF92VJ6S&d=DwMGaQ&c=c6MrceVCY5m5A_KAUkrdoA&r=_2fcgDL48JH6xH97k8QTr5xs5ua5oLdreTU-ysnT2Zw&m=s-PEGz7YxZLDkCuifBuijZE8PM1LzrFsacu6Vk1rbCA&s=QyvN2WHDbhhrA1oTSvn92BmLaBRpp_qGQwmu0oVRYNg&e=> one, but I am pretty sure this SIM card reader is not working. I think it will be good to buy a new card reader; I am taking necessary steps to buy the new SIM card reader. I hope everything will be fine. However, here is the output of lsusb command without the Card reader.

wslopenbts at wslopenbts-desktop:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

and with the Card reader.

wslopenbts at wslopenbts-desktop:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

It seems syslog command is not working in my system. Here is the output.

wslopenbts at wslopenbts-desktop:~$ syslog
No command 'syslog' found, did you mean:
 Command 'syslogd' from package 'busybox-syslogd' (universe)
 Command 'syslogd' from package 'inetutils-syslogd' (universe)
 Command 'dsyslog' from package 'dsyslog' (universe)
syslog: command not found

Thank you.
Best Regards,
Farah


________________________________
From: Tomcsányi, Domonkos <domi at tomcsanyi.net>
Sent: Wednesday, June 13, 2018 12:25:47 AM
To: Ferdaus, Farah
Cc: openbsc at lists.osmocom.org
Subject: Re: Regarding Programming SIM cards

Hi Farah,

What SIM card reader are you using? What does the command lsusb say?
Also check dmesg and syslog for more information. It is almost sure that your reader’s driver is not yet or already included in pcsc, so you will need peobably change pcsc version to an older or newer release.

Kind regards,
Domi


2018. jún. 13. dátummal, 1:22 időpontban Ferdaus, Farah <ff1016 at wildcats.unh.edu<mailto:ff1016 at wildcats.unh.edu>> írta:


Hi there,
I have built and installed the requirements for OpenBTS and my USRP (Ettus N210) is responding but now I am stuck at SIM card stage. I am trying to program a Super SIM 16-in-1 using the Insten_USB_SIM_Card_Writer<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_Insten-2DReader-2DWriter-2DBackup-2DPhone_dp_B0188GHIP2_ref-3Dpd-5Fsbs-5F147-5F1-3F-5Fencoding-3DUTF8-26pd-5Frd-5Fi-3DB0188GHIP2-26pd-5Frd-5Fr-3D7814918c-2D6ce3-2D11e8-2D8c85-2D6f6601b90f74-26pd-5Frd-5Fw-3DuWdRH-26pd-5Frd-5Fwg-3DJuNOy-26pf-5Frd-5Fi-3Ddesktop-2Ddp-2Dsims-26pf-5Frd-5Fm-3DATVPDKIKX0DER-26pf-5Frd-5Fp-3D5825442648805390339-26pf-5Frd-5Fr-3DKR5JHK6G2A4ATF92VJ6S-26pf-5Frd-5Fs-3Ddesktop-2Ddp-2Dsims-26pf-5Frd-5Ft-3D40701-26psc-3D1-26refRID-3DKR5JHK6G2A4ATF92VJ6S&d=DwMGaQ&c=c6MrceVCY5m5A_KAUkrdoA&r=_2fcgDL48JH6xH97k8QTr5xs5ua5oLdreTU-ysnT2Zw&m=s-PEGz7YxZLDkCuifBuijZE8PM1LzrFsacu6Vk1rbCA&s=QyvN2WHDbhhrA1oTSvn92BmLaBRpp_qGQwmu0oVRYNg&e=> and following the steps mentioned here<https://urldefense.proofpoint.com/v2/url?u=http-3A__openbts.org_w_index.php-3Ftitle-3DProgrammingSIMcards&d=DwMGaQ&c=c6MrceVCY5m5A_KAUkrdoA&r=_2fcgDL48JH6xH97k8QTr5xs5ua5oLdreTU-ysnT2Zw&m=s-PEGz7YxZLDkCuifBuijZE8PM1LzrFsacu6Vk1rbCA&s=797n0Mq2esSXXtwk_cTyPTjDTNnZO2v6uyyT2zbYDZI&e=> and here<https://urldefense.proofpoint.com/v2/url?u=http-3A__osmocom.org_projects_pysim_wiki&d=DwMGaQ&c=c6MrceVCY5m5A_KAUkrdoA&r=_2fcgDL48JH6xH97k8QTr5xs5ua5oLdreTU-ysnT2Zw&m=s-PEGz7YxZLDkCuifBuijZE8PM1LzrFsacu6Vk1rbCA&s=gSufz-DM98q2yf3Oh-MjhCh0w0TyfEFGInjQhbOiACs&e=> but unable to write the sim card.  Every time I run the pcsc_scan command it stops working. Below is the output.

"wslopenbts at wslopenbts-desktop:~$ pcsc_scan
PC/SC device scanner
V 1.4.25 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau at free.fr<mailto:ludovic.rousseau at free.fr>>
Compiled with PC/SC lite version: 1.8.14
Using reader plug'n play mechanism
Scanning present readers...
Waiting for the first reader...^C"

The problem seems that the PC is not getting the SIM card reader. But the SIM card reader was plugged into the PC while running the command and the LED turned red which indicate it was getting the power from the PC. Do you think, buying another new SIM card reader can resolve the issue? I can test by buying another SIM and SIM card reader; Do any of you have any suggestion for the SIM and SIM card reader, particularly which one will be good? Finally, any guideline for me regarding programming the SIM card. I will be very grateful if you help me by giving suggestions to resolve my issue.

Can anyone please help me regarding this issue.

Thanks in advance
Best Regards,
Farah

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20180613/3b1c66fc/attachment.htm>


More information about the OpenBSC mailing list