Osmotrx compatibility with LimeSDR mini

historical

Hi,
You need to configure and add the following the -C limesdr.cfg after the
osmo-trx-lms command.

example: osmo-trx-lms -C limesdr.cfg

the example configuration can find on the doc from osmo-trx folder.

Thats why no other option since it use -C to fill all option on it.

hope this help.

Best Regards,
Sandi DUO

On Sun, Jul 15, 2018, 19:01 Babar Ali <babarbuttgrt at yahoo.com> wrote:

> Hi Pedrol
>
> Thank you for your support, I have build following components from source.
>
> 1. SoapySDR v0.6.1
> 2. Lime Suite v18.06.0
> 3. UHD v3.12.0.0-rc1
> 4. SoapyUHD v0.3.4
> 5. osmo-trx v0.4.0 configure --with-lms
>
> however i have only following options are available with osmo-trx
>
> *root at miniBTS:/home/pi/osmocom/osmo-trx#* osmo-trx-lms -h
>
> Options:
>   -h    This text
>   -C    Filename The config file to use
>   -V    Print the version of OsmoTRX
>
> *why on raspberry all options are not available with osmo-trx*
>
> *Babar Ali*
>
>
> On Saturday, 14 July 2018, 4:31:43 AM GMT+5, Pau Espin Pedrol <
> pespin at sysmocom.de> wrote:
>
>
> Hi Babar,
>
> If you want to use a LimeSDR-mini, you should build latest master, and
> use osmo-trx-lms binary. To generate that binary, you first need to
> build and install latest LimeSuite master [1], and then build osmo-trx
> with --with-lms configure flag. As you are building for raspberry pi3,
> you may want to enable instruction set optimizations as explained in the
> user manual section "12 OsmoTRX hardware architecture support" [2]. Have
> a look at the wiki page too for further information [3].
>
> Also a reminder: we have osmo-trx-lms already available as a debian
> package for debian9 [4], but I think we don't enable NEON on that build.
>
> [1] https://github.com/myriadrf/LimeSuite
> [2] http://ftp.osmocom.org/docs/latest/osmotrx-usermanual.pdf
> [3] https://osmocom.org/projects/osmotrx/wiki/OsmoTRX
> [4]
> https://download.opensuse.org/repositories/network:/osmocom:
> /nightly/Debian_9.0/
>
> On 12/07/18 01:36, Babar Ali wrote:
> > Hi Harald
> >
> > Thank very much for your support please, i’ll test & share the results.
> >
> > Further kindly let me clear one more thing please, can I build osmotrx
> > on RaspbianOS, I have already tried to build osmotrx v0.3 on RasbianOS
> > it was build successfully but when I run osmo-trx —help, it shows only
> > one option that is -C which I can use with osmo-trx, no other options
> > are available, is it cannot be build completely on raspberry pi 3? or
> > what’s gone wrong? any suggestions/comments in this regard please.
> >
> > Thank you for your support & time please.
> >
> > Regards
> > Babar
> >
> > On Thursday, July 12, 2018, 1:26 AM, Harald Welte <laforge at gnumonks.org>
>
> > wrote:
> >
> >    On Wed, Jul 11, 2018 at 04:53:54PM +0000, Babar Ali wrote:
> >
> >      > Anyone has an experience of Setuping 2G Network using NITB &
> >    LimeSDR Mini, which version of osmotrx is working fine with LimeSDR
> >    Mini.
> >
> >
> >    We have seen very good results using the new osmo-trx-lms with
> >    LimeSDR-mini.
> >
> >    --
> >    - Harald Welte <laforge at gnumonks.org <mailto:laforge at gnumonks.org>>
>
> >    http://laforge.gnumonks.org/
> >    ============================================================
> ================
> >    "Privacy in residential applications is a desirable marketing option."
> >                                                        (ETSI EN 300
>
> >    175-7 <tel:300%20175-7> Ch. A6)
> >
>
> --
> - Pau Espin Pedrol <pespin at sysmocom.de>        http://www.sysmocom.de/
> =======================================================================
> * sysmocom - systems for mobile communications GmbH
> * Alt-Moabit 93
> * 10559 Berlin, Germany
> * Sitz / Registered office: Berlin, HRB 134158 B
> * Geschaeftsfuehrer / Managing Director: Harald Welte
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20180715/116c03ac/attachment.htm>