This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Muhammad Awais Aslam mawais.aslam985 at gmail.comDear Neels, > I'm personally not familiar with osmocom-bb at all and am not at liberty to > spend time on that at the moment, so I'm afraid I need to pass the question on > in the hope that others can help instead. Can we use osmocom for debugging purpose? I mean, during the Handover procedure when MS sends HO access burst to the network, can we use the osmocom to handle this procedure? In this way, can we check if MS is properly sending HO access burst to the right BTS? Any suggestion if want to share to debug the issue would be appreciable. thanks > ...and let me add that osmocom-bb would better be discussed in the > baseband-devel@ mailing list, since mails to openbsc@ are expected to be about > the core network / BSS part of Osmocom. Before I sent email to openbsc ML, I used the baseband-devel ML platform and share everything there but I could not get any help regarding this issue. That's the reason I chose this ML for help. Regards Awais On Mon, Jan 15, 2018 at 10:14 PM, Neels Hofmeyr <nhofmeyr at sysmocom.de> wrote: > ...and let me add that osmocom-bb would better be discussed in the > baseband-devel@ mailing list, since mails to openbsc@ are expected to be > about > the core network / BSS part of Osmocom. > > ~N > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20180116/d5926fea/attachment.htm>