This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Max msuraev at sysmocom.deWhat's the situation with UHD version support now? I've tried running "./Transceiver52M/osmo-trx -m -c 2 -e -l INFO -g" from recent osmo-trx master ang got following errors with different UHS version: linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.000.000-release -- Loading firmware image: /usr/share/uhd/images/usrp_b200_fw.hex... INFO 3032143616 12:57:24.6 UHDDevice.cpp:786:open: Using discovered UHD device type=b200,name=MyB210,serial=30AC26A,product=B210 ALERT 3032143616 12:57:25.8 UHDDevice.cpp:790:open: UHD make failed, device ALERT 3032143616 12:57:25.8 UHDDevice.cpp:790:open: UHD make failed, device ALERT 3032143616 12:57:25.8 osmo-trx.cpp:530:main: Failed to create radio device ALERT 3032143616 12:57:25.8 osmo-trx.cpp:530:main: Failed to create radio device Shutting down transceiver... linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.004-0-unknown INFO 3036346112 12:51:39.9 UHDDevice.cpp:786:open: Using discovered UHD device type=b200,name=MyB210,serial=30AC26A,product=B210 -- Operating over USB 2. -- Initialize CODEC control... -- Initialize Radio control... -- Performing register loopback test... pass -- Performing register loopback test... pass -- Performing CODEC loopback test... pass -- Performing CODEC loopback test... pass -- Asking for clock rate 32.000000 MHz -- Actually got clock rate 32.000000 MHz -- Performing timer loopback test... pass -- Performing timer loopback test... pass INFO 3036346112 12:51:43.3 UHDDevice.cpp:743:parse_dev_type: Using USRP1 type transmit window for B-Series Device B210 -- Asking for clock rate 3.200000 MHz UHD Warning: The requested master_clock_rate 3.200000 MHz exceeds bounds imposed by UHD. The master_clock_rate has been forced to 5.000000 MHz. -- Actually got clock rate 5.000000 MHz -- Performing timer loopback test... pass -- Performing timer loopback test... pass ALERT 3036346112 12:51:45.0 UHDDevice.cpp:546:set_master_clk: Failed to set master clock rate ALERT 3036346112 12:51:45.0 UHDDevice.cpp:546:set_master_clk: Failed to set master clock rate ALERT 3036346112 12:51:45.0 UHDDevice.cpp:547:set_master_clk: Requested clock rate 3.2e+06 ALERT 3036346112 12:51:45.0 UHDDevice.cpp:547:set_master_clk: Requested clock rate 3.2e+06 ALERT 3036346112 12:51:45.0 UHDDevice.cpp:548:set_master_clk: Actual clock rate 5e+06 ALERT 3036346112 12:51:45.0 UHDDevice.cpp:548:set_master_clk: Actual clock rate 5e+06 ALERT 3036346112 12:51:45.0 osmo-trx.cpp:530:main: Failed to create radio device ALERT 3036346112 12:51:45.0 osmo-trx.cpp:530:main: Failed to create radio device Shutting down transceiver... On 08/11/2016 04:14 AM, Tom Tsou wrote: > On Wed, Aug 10, 2016 at 11:08 AM, Sipos Csaba > <sipos.csaba at kvk.uni-obuda.hu> wrote: >>> There is a UHD version requirement to clock the B200/B210 below 5 MHz >> Can you tell which version it is? >> >> I am using 3.9.4 > Unfortunately, the requirement turns out to be master. I'm testing a > workaround for prior UHD versions. > > -TT -- Max Suraev <msuraev at sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte