This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Neels Hofmeyr nhofmeyr at sysmocom.deThis may seem like overkill for a mere const char * config item, but it makes
the Control interface VTY commands reusable in any main() scope (inspired by
libosmo-abis' VTY config).
Add API functions ctrl_vty_init() and ctrl_vty_get_bind_addr(), in new files
src/ctrl/control_vty.c and include/osmocom/ctrl/control_vty.h, compiled and/or
installed dependent on ENABLE_VTY.
Using these functions allows configuring a static const char* with the VTY
commands
ctrl
bind A.B.C.D
which callers shall subsequently use to bind the Control interface to a
specific local interface address, by passing the return value of
ctrl_vty_get_bind_addr() to control_interface_setup().
Add CTRL_NODE to enum node_type, "eating" RESERVED4_NODE to heed that comment
on avoiding ABI changes.
---
include/Makefile.am | 3 +-
include/osmocom/ctrl/control_vty.h | 9 ++++
include/osmocom/vty/command.h | 3 +-
src/ctrl/Makefile.am | 4 ++
src/ctrl/control_vty.c | 90 ++++++++++++++++++++++++++++++++++++++
5 files changed, 107 insertions(+), 2 deletions(-)
create mode 100644 include/osmocom/ctrl/control_vty.h
create mode 100644 src/ctrl/control_vty.c
diff --git a/include/Makefile.am b/include/Makefile.am
index a965fb9..ac22ee6 100644
--- a/include/Makefile.am
+++ b/include/Makefile.am
@@ -117,7 +117,8 @@ nobase_include_HEADERS += \
osmocom/vty/telnet_interface.h \
osmocom/vty/vector.h \
osmocom/vty/vty.h \
- osmocom/vty/ports.h
+ osmocom/vty/ports.h \
+ osmocom/ctrl/control_vty.h
endif
noinst_HEADERS = \
diff --git a/include/osmocom/ctrl/control_vty.h b/include/osmocom/ctrl/control_vty.h
new file mode 100644
index 0000000..d0ef69f
--- /dev/null
+++ b/include/osmocom/ctrl/control_vty.h
@@ -0,0 +1,9 @@
+#pragma once
+
+/* Add the 'ctrl' section to VTY, containing the 'bind' command. */
+int ctrl_vty_init(void *ctx);
+
+/* Obtain the IP address configured by the 'ctrl'/'bind A.B.C.D' VTY command.
+ * This should be fed to ctrl_interface_setup() once the configuration has been
+ * read. */
+const char *ctrl_vty_get_bind_addr(void);
diff --git a/include/osmocom/vty/command.h b/include/osmocom/vty/command.h
index 2078e1b..937d2f8 100644
--- a/include/osmocom/vty/command.h
+++ b/include/osmocom/vty/command.h
@@ -84,6 +84,8 @@ enum node_type {
L_NS_NODE, /*!< \brief NS node in libosmo-gb. */
L_BSSGP_NODE, /*!< \brief BSSGP node in libosmo-gb. */
+ CTRL_NODE, /*!< \brief Control interface node. */
+
/*
* When adding new nodes to the libosmocore project, these nodes can be
* used to avoid ABI changes for unrelated projects.
@@ -91,7 +93,6 @@ enum node_type {
RESERVED1_NODE, /*!< \brief Reserved for later extensions */
RESERVED2_NODE, /*!< \brief Reserved for later extensions */
RESERVED3_NODE, /*!< \brief Reserved for later extensions */
- RESERVED4_NODE, /*!< \brief Reserved for later extensions */
_LAST_OSMOVTY_NODE
};
diff --git a/src/ctrl/Makefile.am b/src/ctrl/Makefile.am
index e6ccafb..b4a3da4 100644
--- a/src/ctrl/Makefile.am
+++ b/src/ctrl/Makefile.am
@@ -13,3 +13,7 @@ libosmoctrl_la_LIBADD = \
$(top_builddir)/src/libosmocore.la \
$(top_builddir)/src/gsm/libosmogsm.la \
$(top_builddir)/src/vty/libosmovty.la
+
+if ENABLE_VTY
+libosmoctrl_la_SOURCES += control_vty.c
+endif
diff --git a/src/ctrl/control_vty.c b/src/ctrl/control_vty.c
new file mode 100644
index 0000000..7df53b8
--- /dev/null
+++ b/src/ctrl/control_vty.c
@@ -0,0 +1,90 @@
+/* VTY configuration for Control interface
+ *
+ * (C) 2016 by sysmocom s.m.f.c GmbH <info at sysmocom.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <stdlib.h>
+#include <talloc.h>
+#include <osmocom/ctrl/control_vty.h>
+#include <osmocom/vty/command.h>
+
+static void *ctrl_vty_ctx = NULL;
+static const char *ctrl_vty_bind_addr = NULL;
+
+DEFUN(cfg_ctrl_bind_addr,
+ cfg_ctrl_bind_addr_cmd,
+ "bind A.B.C.D",
+ "Set bind address to listen for Control connections\n"
+ "Local IP address (default 127.0.0.1)\n")
+{
+ if (ctrl_vty_bind_addr) {
+ talloc_free((void*)ctrl_vty_bind_addr);
+ ctrl_vty_bind_addr = NULL;
+ }
+ ctrl_vty_bind_addr = talloc_strdup(ctrl_vty_ctx, argv[0]);
+ return CMD_SUCCESS;
+}
+
+const char *ctrl_vty_get_bind_addr(void)
+{
+ if (!ctrl_vty_bind_addr)
+ return "127.0.0.1";
+ return ctrl_vty_bind_addr;
+}
+
+struct cmd_node ctrl_node = {
+ CTRL_NODE,
+ "%s(config-ctrl)# ",
+ 1,
+};
+
+DEFUN(cfg_ctrl,
+ cfg_ctrl_cmd,
+ "ctrl", "Configure the Control Interface")
+{
+ vty->index = NULL;
+ vty->node = CTRL_NODE;
+
+ return CMD_SUCCESS;
+}
+
+static int config_write_ctrl(struct vty *vty)
+{
+ /* So far there's only one element. Omit the entire section if the bind
+ * element is omitted. */
+ if (!ctrl_vty_bind_addr)
+ return CMD_SUCCESS;
+
+ vty_out(vty, "ctrl%s", VTY_NEWLINE);
+ vty_out(vty, " bind %s%s", ctrl_vty_bind_addr, VTY_NEWLINE);
+
+ return CMD_SUCCESS;
+}
+
+int ctrl_vty_init(void *ctx)
+{
+ ctrl_vty_ctx = ctx;
+ install_element(CONFIG_NODE, &cfg_ctrl_cmd);
+ install_node(&ctrl_node, config_write_ctrl);
+
+ install_element(CTRL_NODE, &cfg_ctrl_bind_addr_cmd);
+ return 0;
+}
+
--
2.1.4