This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
./Vervelak vervelak at gmail.comHello List I'm trying to make my openbsc installation work in half rate mode but I'm facing some errors. I'm wondering if someone could provide me with more info or help me to configure openbsc. I have changed in openbsc.cfg the timeslots 2 to 7 from phys_chan_config TCH/F into phys_chan_config TCH/H also I have tested changing neci bit and change audio codecs but no luck. Am I missed something? Is there any way to run osmo-nitb with gsmtap? openbsc.cfg is attached Thanks in advance. -------------- next part -------------- ! ! OpenBSC configuration saved from vty ! ! password foo ! line vty no login ! e1_input e1_line 0 driver ipa network network country code 01 mobile network code 001 short name **** long name **** auth policy closed location updating reject cause 13 encryption a5 0 neci 1 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3101 10 timer t3103 0 timer t3105 0 timer t3107 0 timer t3109 4 timer t3111 0 timer t3113 60 timer t3115 0 timer t3117 0 timer t3119 0 timer t3141 0 bts 0 type nanobts band DCS900 cell_identity 0 location_area_code 1 training_sequence_code 7 base_station_id_code 63 ms max power 33 cell reselection hysteresis 4 rxlev access min 0 channel allocator ascending rach tx integer 9 rach max transmission 7 ip.access unit_id 1 0 oml ip.access stream_id 255 line 0 gprs mode none trx 0 rf_locked 0 arfcn 53 nominal power 23 max_power_red 20 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 timeslot 1 phys_chan_config SDCCH8 timeslot 2 phys_chan_config TCH/H timeslot 3 phys_chan_config TCH/H timeslot 4 phys_chan_config TCH/H timeslot 5 phys_chan_config TCH/H timeslot 6 phys_chan_config TCH/H timeslot 7 phys_chan_config TCH/H