This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Dmitri Soloviev dmisol at mail.ruHi Harald, we are using exactly the same Handover Command. Right now I have no clue to Nokia handsets behavior during handover. So, I'm waiting for the second umTRX to start playing with handover again. Thank you for your letter. Regards, Dmitri Thu, 1 Nov 2012 19:22:21 +0100 от Harald Welte <laforge at gnumonks.org>: > > > > >Hi Alexander and Dmitri, > > On Thu, Nov 01, 2012 at 11:33:28AM +0400, Alexander Chemeris wrote: > > Dimitri, we have a working OpenBSC/nanoBTS installation at the hackerspace. > > If you find out how to issue a handover command in OpenBSC, you could try > > by yourself. > > You cannot issue a handover command manually in OpenBSC. The way how we > test handover is to use two BTSs connected to one OsmoNITB, and use > rotary/adjustable attenuators in the Tx path to make one BTS signal > weaker than the other BTS, at which point the handover algorithm will > kick in and perform the hand-over. > > The DMEAS and the DHO debug logging might be useful to monitor what is > happening while you're doing that. > > Regards, > Harald > -- > - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ > ============================================================================ > "Privacy in residential applications is a desirable marketing option." > (ETSI EN 300 175-7 Ch. A6) > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20121102/cb9436bf/attachment.htm>