Compiling LCR for OpenBSC

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Nik Pakar nikpakar at gmail.com
Mon Mar 5 11:39:28 UTC 2012


Hi Andreas,

Every thing works fine.

Just one last question. I cant find any sample dialplan option towards gsm
and sip interface. tried quite a few didnt worked.

Appreciate if you can just give the last hint how would the dial plan
should looks like towards gsm and sip.

Thanks again.
Nik

On Mon, Mar 5, 2012 at 10:23 AM, Nik Pakar <nikpakar at gmail.com> wrote:

> Hi Andreas, extreamlly sorry for the blind question.
>
> I didnt do autogen to create the configure.
>
> Extreamly sorry again.
>
> Rgds
> Nik
>
>
> On Mon, Mar 5, 2012 at 10:19 AM, Nik Pakar <nikpakar at gmail.com> wrote:
>
>> Hi Andreas, thousand times thanks for the correct hint.
>>
>> Its indeed crystal clear now.
>>
>> I have tried the git clone from  git://git.osmocom.org/openbsc.git  but
>> noticed there is still misdn requirement and also no sip support.
>>
>> Then found from the maillist that i should clone
>> git://git.osmocom.eu/openbsc.git instead of .org which shows sip
>> interfaces on the source.
>>
>> How ever there is no configure file on this source.
>>
>> Am i still checking out from the wrong git ?
>>
>> Once again highly appreciate some light on the final bit.
>>
>> Thanks
>> Nik
>>
>>
>> On Mon, Mar 5, 2012 at 7:44 AM, jolly <andreas at eversberg.eu> wrote:
>>
>>> > Do I have to have mISDN for LCR even im not going to use any isdn
>>> > interface ? Im trying to connect the NITB to LCR and LCR to asterisk
>>> > all on ip.
>>> >
>>> > Thanks for any help.
>>> >
>>> > Rgds
>>> > Nik
>>> hi nik,
>>>
>>> you don't need misdn to use lcr with sip and gsm anymore. also you don't
>>> need any patch. the lcr and openbsc compile out of the box supporting
>>> each other. the howto is a bit outdated.
>>>
>>> try to compile the lcr from the git. don't use chan_lcr, since it still
>>> works with isdn only. you need to setup a sip interface in
>>> interface.conf:
>>>
>>> [sip]
>>> sip <local ip> <remote ip>[:<port>]
>>> sip 10.0.0.12 10.0.0.34
>>> earlyb no
>>> tones no
>>>
>>> use asterisk machine for remote ip.  if you have asterisk on the same
>>> machine, change the sip port of asterisk and use "remoteip:port".
>>>
>>> regards,
>>>
>>> andreas
>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20120305/35dc5c5e/attachment.htm>


More information about the OpenBSC mailing list