This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Ellen Apolinar ellen.apolinar.td at googlemail.comAnother question which is the most important: Is it possible to use OpenBSC with UMTS instead of GSM? Regards Ellen 2012/6/4 Ellen Apolinar <ellen.apolinar.td at googlemail.com> > Hi Alexander, > > > thank you for this information. That's very usefull. > > Time is a problem because there is no much time so I have to do my best. > > BTS hardware, lab environment and C programming skills aren't a problem. > If I'm at the end of my knowledge there are some ery good programmers which > could help me. But first I want to do it by myself. > > So there are more BTS so I have to implement the A-Bis dialect for all of > these BTS? It seems that you have experience with this so perhaps you can > tell me where exactly I have to implement these. The only file I know to > configure is the openbsc.cfg-file. When I have to implement the A-bis > dialect in OpenBSC what do you mean? Which files I have to configure and > what do I need to know? > > In the moment we are working with a GLJ adapter (T1/E1 Analyser Hardware)for getting the traces between BTS and OpenBSC. > > If you or someone else could us give tipps how to do it in the best way it > would be very appreciated. > > > Best gerads and thank you very much for your help. > Ellen > > > > > 2012/6/4 Alexander Huemer <alexander.huemer at xx.vu> > >> Hi Ellen, >> >> On Mon, Jun 04, 2012 at 09:23:21AM +0200, Ellen Apolinar wrote: >> > Before OpenBSC runs with another BTS than those which are supported yet >> I >> > have to build an openbsc.cfg-file. That's is what I think I should do. I >> > don't know if there are other configurations to do. >> >> adding support for a BTS model is not just a matter of writing a >> configuration file. The details of the used A-bis dialect have to be >> implemented inside of OpenBSC before it makes sense to touch a config >> file. >> >> To do that you should have: >> * One of the BTSs >> * A lab environment >> * Protocol traces of the A-bis link during startup and usage >> * C programming skills >> * Time >> >> Right now you can only use the known BTS models with OpenBSC OOTB. >> >> I hope that helps making the situation clearer. >> >> Kind regards, >> -Alexander Huemer >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20120604/16cf660f/attachment.htm>