This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Don Fanning don at 00100100.netOn Thu, Feb 9, 2012 at 10:21 PM, Lennart Müller < mueller.lennart at googlemail.com> wrote: > Hi, > > 2012/2/10 Don Fanning <don at 00100100.net> > >> Hello All, >> >> After some trials and tribulations, I think I got my OpenBSC+LCR+Asterisk >> compiles and working. The MS connects once I spoof the proper MCC/MNC for >> the foreign SIM I have (to ensure that no one else can connect within my >> area). >> > > That does not completely prevent somebody from trying to connect to your > network. Using the common test equipment id and manually selecting the > network in your phone is also possible and I think much better than sending > out any operator MCC/MNC (apart from using an RF attentuator). > > >> Then when I try to make a test call to an asterisk extension, it give me >> the following: >> ... >> >> Thu Feb 9 18:55:58 2012 <0002> gsm_04_08.c:858 <- CM SERVICE REQUEST >> serv_type=0x01 mi_type=0x04 M(210271915) >> Thu Feb 9 18:55:58 2012 <0002> gsm_04_08.c:800 -> CM SERVICE Reject >> cause: 2 >> > ... >> > > This code triggers the reject: > > if (!subscr) > return gsm48_tx_mm_serv_rej(conn, > GSM48_REJECT_IMSI_UNKNOWN_IN_HLR); > > So, have you inserted your IMSI into your OpenBSC HLR (sqlite database)? > > -- Lennart > Doh! Ok.. got the handset registered, it's working fine. Now an LCR question: I'm currently getting a voice error message "There is no extension created for your MSN number" followed by a SIT tone. Below is the log from LCR. 09.02.12 23:30:42.542 CH(7): MT_NEW_L3ID INDICATION port 1 callref new=0x80000007 09.02.12 23:30:42.543 CH(7): CHANNEL SELECTION (setup) port 1 channel reserved=0 conclusion 'channel available' connect channel=1 09.02.12 23:30:42.543 CH(7): BCHANNEL create socket port 1 channel 1 socket 15 09.02.12 23:30:42.543 CH(7): BCHANNEL activate port 1 channel 1 09.02.12 23:30:42.543 CH(7): MNCC_SETUP_IND LCR<->BSC port 1 calling number=40515 imsi=xxxxx dialing number=500 09.02.12 23:30:42.543 CH(7): unknown LCR<->BSC port 1 mode 0x01 09.02.12 23:30:42.543 CH(7): MNCC_CALL_PROC_REQ LCR<->BSC port 1 progress coding=3 location=1 descr=8 09.02.12 23:30:42.543 CH(7): unknown LCR<->BSC port 1 09.02.12 23:30:42.544 EP(7): SETUP from CH(7) caller id number=40515 present=allowed dialing 500 complete true 09.02.12 23:30:42.544 --: SCREEN (not found in MSN list) msn given=40515 used=1234567 09.02.12 23:30:42.544 --: SCREEN (not found in MSN list) msn given= used=1234567 09.02.12 23:30:42.544 EP(7): EXTENSION (not created) extension 1234567 09.02.12 23:30:42.544 EP(7): DISCONNECT to CH(7) cause value=21 location=1-Local-PBX 09.02.12 23:30:42.544 EP(7): TONE to CH(7) directory default name cause_80 09.02.12 23:30:42.544 CH(7): MNCC_DISC_REQ LCR<->BSC port 1 progress coding=3 location=1 descr=8 cause coding=3 location=1 value=21 09.02.12 23:30:42.545 CH(7): BCHANNEL control port 1 DSP-DTMF 1 09.02.12 23:30:52.751 CH(7): MNCC_REL_IND LCR<->BSC port 1 09.02.12 23:30:52.752 EP(7): RELEASE from CH(7) cause value=16 location=0-User 09.02.12 23:30:52.752 CH(7): BCHANNEL deactivate port 1 channel 1 09.02.12 23:30:52.752 CH: BCHANNEL remove socket port 1 channel 1 socket 15 So my next question is how do I create an extension for the mobile and link it to asterisk? Is there a way for LCR to automatically generate extensions? Thank you again! -Don -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20120209/cf66511a/attachment.htm>