This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Thomas Ansorg kobayashi_maru at onlinehome.dehello im still trying to make 2 bts work in multidrop mode. bts0, the one on the pc, tells that: LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: No Load Abis-link: Restoring BS11 ATTRIBUTES: BS-11 ESN PCB Serial Number: 001104 BS-11 ESN Hardware Code Number: 135-2044/03.07 BS-11 ESN Firmware Code Number: 135-2044/03.07 PLL Set Value=1006, Work Value=1038 SITE MANAGER ATTRIBUTES: E1 Channel: Port=0 Timeslot=1 (Full Slot) TEI: 25 BS11 Line Interface ATTRIBUTES: PLL Mode: Standalone BS11 CCLK ATTRIBUTES: CCLK Accuracy: High (1) CCLK Type=0 BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM) BPORT0 ATTRIBUTES: Line Configuration: Multi-Drop (1) BPORT1 ATTRIBUTES: Line Configuration: Multi-Drop (1) LMT LOGOFF: ACK this bs11 works pretty well as single config. but bts1 tells that: LMT LOGON: ACK PHASE: 3 Normal MBCCU0: No Load MBCCU1: Load Abis-link: Restoring BS11 ATTRIBUTES: BS-11 ESN PCB Serial Number: 001111 BS-11 ESN Hardware Code Number: 135-2044/03.03 BS-11 ESN Firmware Code Number: 135-2044/03.03 PLL Set Value=1042, Work Value=1221 SITE MANAGER ATTRIBUTES: E1 Channel: Port=1 Timeslot=17 (Full Slot) TEI: 25 BS11 Line Interface ATTRIBUTES: PLL Mode: Standalone BS11 CCLK ATTRIBUTES: CCLK Accuracy: Medium (0) CCLK Type=0 BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 2W (GSM) BPORT0 ATTRIBUTES: Line Configuration: Star (0) BPORT1 GET ATTR NACK LMT LOGOFF: ACK as you can see, i configured the 2nd bs11 with ts 17 on port 1, according the bmask and dmask settings(sorry for that yesterday, but sometimes there are so many trees you dont see the forest - german saying), and bsc_hack starts now without problems, but bootstrapping is only on bts0, bts1 isnt recognised. when i connect bts1 to the pc and run it in single mode(with line 1 timeslot 17 settings in openbsc.cfg), it is recogised with bootstrapping, but dont function. it isnt seen by any handy. i put 2 attachments in the mail, hope they arent dropped could the different pll and work values be the reason? is the BPORT1 GET ATTR NACK from bts1 a possible reason? what about the strange messages seen in the bts1_err.jpg? T. -- Wer Rechtschreibfehler findet, darf sie behalten! -------------- next part -------------- A non-text attachment was scrubbed... Name: bts1-2.jpg Type: image/jpeg Size: 730919 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20110113/a3b725b4/attachment.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: BTS1_err.JPG Type: image/jpeg Size: 752537 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20110113/a3b725b4/attachment.jpe>