This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgHello Thomas, On Wed, Jan 12, 2011 at 02:45:17PM +0100, Thomas Ansorg wrote: > the misdn driver is nice configured now(dmask=0x00020002, > bmask=0x0000fffc,0xfffc0000) > bts1 (connected to the pc) is configured port 0 ts 1 tei 25 in multidrop > config bts2 is configured port 1 ts 6 tei 26 in line config Why do you configure your BTS to be in TS1 + TS6, and the E1 D channels in TS 1 and 17? Do you realize that 6 != 17 Your BTS2 will try to establish ISDN Layer2 and run OML on TS6, but your mISDN hfcmulti driver will try to establish that on TS17. The OML timeslot of BTS _and_ hfcmulti _and_ your openbsc.cfg need to match in order for it to work. Regards, Harald -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)