This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Omar Atia omar.atia at its.wsThanks It is clear for me !! just send me 1 pcap file to open it with the patched wireshark and it should have abis-oml protocol sniffed inside it , in order to make sure that the patch is okay as I have added the c file inside one place in Makefile.common I will copy the place below : Under : DISSECTOR_SRC= . . . . packet-gsm_a_common.c \ packet-gsm_a_dtap.c \ packet-gsm_a_gm.c \ packet-gsm_abis_oml.c \ packet-gsm_a_rp.c \ packet-gsm_a_rr.c \ packet-gsm_bsslap.c \ is this right ? shall I add it in different place ( C file and header are created under ) /epan/dissectors Thanks, Omar Aia -----Original Message----- From: openbsc-bounces at lists.gnumonks.org [mailto:openbsc-bounces at lists.gnumonks.org] On Behalf Of Holger Hans Peter Freyther Sent: Tuesday, January 11, 2011 5:41 PM To: openbsc at lists.gnumonks.org Subject: Re: Adding patches to wireshark... On 01/11/2011 10:01 AM, Omar Atia wrote: > Yes dear I worked git which I used to download the src for libosmocore and > opensbsc... :) > Patch -p1 (patch file) it raises a problem in Makefile.common , and didn't > patch the Makefile.common but it did create the C and header files for the > below patch abis_oml.patch under dissector, but the issue in the make file , > how can I add them to make file in order to be compiled ... Always hard to judge where the difficulty is. The GNU patch program is leaving a FILENAME.orig and a FILENAME.rej next to the file that failed to be patched. In your case you should have a Makefile.common.rej that shows you which 'hunk' (part of the patch) was not applied. You simply need to add the abis-oml c file to that... > > Any way I will google git svn tonight and check it , but if you have any > hint for the version of wireshark I should download the sources for it let > me know . I have rebased the patches, added a README with the svn version that these patches apply to to the OpenBSC git. everything clear now?