Can't start nanoBTS properly.

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Nordin bouchtaoui at gmail.com
Tue Mar 30 15:56:29 UTC 2010


I downloaded and built the latest version of openbsc/libosmocore (that's 
today's version), but when running, it hangs on this part:
<0005> abis_nm.c:519 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff) 
IPACCESS(0xe1): RSL CONNECT ACK IP=10.100.1.22 PORT=3003 STREAM=0x00
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,00) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,01) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,02) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,03) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,04) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,05) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,06) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=CHANNEL(03) INST=(00,00,07) CHANGE 
ADMINISTRATIVE STATE NACK CAUSE=Message cannot be performed
<0005> abis_nm.c:519 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG: 
OP_STATE=Disabled AVAIL=Off line(03)
<0005> abis_nm.c:519 OC=RADIO CARRIER(02) INST=(00,00,ff) Software 
Activated Report
<0005> abis_nm.c:1770 Set TRX Attr (bts=0,trx=0)
<0005> abis_nm.c:519 OC=RADIO CARRIER(02) INST=(00,00,ff) Sending OPSTART
<0005> abis_nm.c:519 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG: 
OP_STATE=Disabled AVAIL=OK(ff) ADM=Unlocked
<0005> abis_nm.c:519 OC=RADIO CARRIER(02) INST=(00,00,ff) Sending OPSTART

It stops there and nanoBTS keeps blinking green light.
When running an older version (without libosmocore), it works well.
Is this a familiar behaviour, any idea?

Thnx.






More information about the OpenBSC mailing list