This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgOn Tue, Feb 02, 2010 at 06:54:08PM +0100, till wrote: > Hi, > > i have problems bringing up the second TRX. I used the following procedure: > > ./bs11_config -p /dev/ttyUSB0 disconnect > ./bs11_config -p /dev/ttyUSB0 create-trx1 > > > After reboot the query tells me: > > ./bs11_config -p /dev/ttyUSB0 query > LMT LOGON: ACK > > PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring THis "MBCCU1: Load" tells you that the second TRX object has been creted and it is active and loaded. > BS11 Power Amplifier 0 ATTRIBUTES: > TRX Power: 30mW (GSM) > Now i wondered where is the trx1, did anyone has a similar problem? I have > the BS-11 ESN PCB Serial Number: 001127 which should have two TRX. it might well be a bug in the bs11_config program that the second PA does not show. -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)