This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Dieter Spaar spaar at mirider.augusta.deHello Sergey, On Thu, 2 Dec 2010 21:08:09 +0300, "Sergey V. Efimoff" <risky at mail.ru> wrote: > > I had once or twice seen BTS stations which had working PLL value > very different from calibrated value. In order to get them close I had to > use E1 hardware with high precision oscillator, then switch the > hardware to the PLL-locked mode. This operation took me plenty > of time. > > Please tell, is it possible to set the working PLL value directly? Yes, bs11_config supports this. Its the "pll-workvalue" command. The way how the PLL workvalue could be set was not obvious so it took a while till we found out how this could be done. Thats the reason why it took quite long till this command was introduced. Best regards, Dieter -- Dieter Spaar, Germany spaar at mirider.augusta.de