This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgHi all, JFYI: There's some progress on the nanoBTS multi-TRX configuration. It seems it was my mistake. Setting the TRX0 unit ID to 1801/0/0 and the TRX1 unit ID to 1801/0/1 works using ipaccess-config. If you then connect the TIB cable (TRX0 TIB out -> TRX1 TIB in) and reboot both nanoBTS, you will get a single A-bis OML connection from 1801/0/0 where you get software activate requests for both transceivers. Somehow we're not handling them correctly yet from our abis_nm code, but that should be easy to solve. I'm working at it. So Dieter and others: No need to worry about this at the moment, we're very close now and I think it is no problem for the 26C3. Regards, -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)