This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Eric Cathelinaud e.cathelinaud at googlemail.comI just noticed something more: the red led are steady at reboot and when configuring bs11 (bs11_config) and when I launch the bsc_hack, the led start to blink. I followed the jumperplan from Beronet but I think there is something wrong cause if the card I can see on the following link is also a BN1E1 I don t have the same locations. http://bs11-abis.gnumonks.org/trac/attachment/wiki/HFC-E1/hfc_e1_evalbd_jumper.jpg I will try this one and let u know 2009/5/25 Eric Cathelinaud <e.cathelinaud at googlemail.com> > I have this in the /boot/grub/menu.lst and it doesn't display any error at > restart. > > title Debian GNU/Linux, kernel 2.6.27.4 > root (hd0,0) > kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro > quiet > initrd /boot/initrd.img-2.6.27.4 > > > 2009/5/25 Andreas.Eversberg <Andreas.Eversberg at versatel.de> > > did you load hfcmulti.ko with dslot=1 parameter? this is required to move >> dchannel slot from 16 to 1. >> >> >> > Mon May 25 16:07:39 2009 <1000> input/misdn.c:125 alen =6, dev(0) >> channel(0) sapi(63) tei(127) >> > Mon May 25 16:07:39 2009 <1000> input/misdn.c:128 <= len = 12, >> prim(0x8) id(0x7f3f): DL_INFORMATION_IND >> > Mon May 25 16:07:39 2009 <1000> input/misdn.c:135 DL_INFORMATION_IND: >> use channel(0) sapi(63) tei(127) for now >> > ISDN message for unknown sign_link >> > >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20090525/588ad243/attachment.htm>