This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Nordin bouchtaoui at gmail.comHi Dieter, You are right about the arfcn number, I modified to 880, and now it is working! I can detect the network on my mobilephone! Thank you very much! Dieter Spaar schreef: > Hello Nordin, > > On Thu, 14 May 2009 17:26:22 +0200, "Nordin" <bouchtaoui at gmail.com> wrote: > >> Than I executed the bsc_hack for the nanoBTS (thus I give the >> appropriate parameters as described on the webpage), and I get the >> following error: >> DB: Database initialized. >> DB: Database prepared. >> mi_setup could not open socket Address family not supported by protocol >> > > Do you really provide the correct parameters to bsc_hack ? The > current version of bsc_hack requires the parameter "-t nanobts900" > or "-t nanobts1800", depending on the type of the nanoBTS you have. > If you don't specify the type, the BS-11 is used. > > Additionally be sure to specify the ARFCN for a nanoBTS 1800 because > otherwise the default GSM900 channel 123 will be used which does not > work for DCS1800. > > Best regards, > Dieter >