This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgOn Sat, Feb 28, 2009 at 12:19:47PM +0000, Dieter Spaar wrote:
> Hello Holger,
>
> On Sat, 28 Feb 2009 11:53:23 +0100, "Holger Adams" <holger at kernreaktor.org> wrote:
> >
> > Maybe its important to mention:
> > - Both LEDs of the E-1 card are blinking red
> > - Used cables for the RJ45 plug (CAT5): orange/blue
>
> I can't help with Linux (I use Windows), however I noticed
> this in mISDN (hfc_multi.c) a while ago:
>
> case 1: /* HFC-E1 OEM */
> /* 2 red blinking: NT mode deactivate
> * 2 red steady: TE mode deactivate
> * left green: L1 active
> * left red: frame sync, but no L1
> * right green: L2 active
> */
>
> So I would guess that there is a synchronisation problem which is not
> related to the TEI setting. Maybe there is something wrong with the
> wire connection. If you can see the signal sent from the E1 card at
> the BS-11 and there is also a signal sent from the BS-11, than probably
> the signal from the BS-11 is not received by the E1 card so it could
> not synchronize on it.
the led's keep blinking red all the time during OpenBSC operation, seems to be
a hfcmulti driver bug that doesn't set the LED's correctly.
--
- Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20090301/e8951f8a/attachment.bin>