BS-11 order

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

dexter zero-kelvin at gmx.de
Fri Aug 7 16:41:24 UTC 2009


Hi!

I had a very semilar problem!
> Specifically, it seems the SMU Safety load is installed and the minimal
> configuration exists, but no actual Software is installed.  Thus, 
> the MBCCU0 and MBCCU1 remains in "No Load", i.e. no firmware running.
>   
MBCCU0 and MBCCU1 will also remain in "No Load" when the oml objects are 
not created correctly. If the firmware is missing the power lamp lights 
up red. If it remains green the firmware should be ok - i think.

To verify if it is a problem with the oml objects you can activate the 
second trx with create-trx1. If MBCCU1 loads on the next startup it must 
be a problem with the initial, minimal configuration.

regards
Philipp




More information about the OpenBSC mailing list