This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Andreas.Eversberg Andreas.Eversberg at versatel.dethe registration did not work, the network was found. i did not test the sim card. i will do this in the future. -----Ursprüngliche Nachricht----- Von: Dieter Spaar [mailto:spaar at mirider.augusta.de] Gesendet: Freitag, 17. April 2009 14:54 An: Andreas.Eversberg Cc: openbsc at lists.gnumonks.org Betreff: Re: AW: BS-11 PLL clock source / calibration Hello Andreas, On Fri, 17 Apr 2009 12:05:16 +0200, "Andreas.Eversberg" <Andreas.Eversberg at versatel.de> wrote: > i tested external clock from isdn line yesterday. modern phones, like > the i-phone will not register to the base station. (tested it yesterday > together with other phones). no packet is received by openbsc. so i set > the clock to "locked" and retrieved the clock from my isdn line (layer 1 > up). it did not help at all. the phone found the base station id while > scanning for networks, but the registration did not work. > > is it possible that the provisioning (during startup) is faulty? If I remeber, several iPhones registered to the BS-11 during 25C3. So it should work (however I cannot test it here, but feel free to send my an iPhone for playing ;-) Do you see the test network with the iPhone or does the registration not work ? Have you tried to use the SIM card from a phone which has already registered to the test network ? This way the iPhone would look at the BS-11 first before trying to search for other netwoks. Best regards, Dieter -- Dieter Spaar, Germany spaar at mirider.augusta.de