This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev at yahoogroups.comGot the ppm adjusted? Use kalibrate to find your offset -------------------------------------------- On Tue, 2/28/17, Apu apu at spfld.com [op25-dev] <op25-dev at yahoogroups.com> wrote: Subject: [op25-dev] Stay tuned? To: op25-dev at yahoogroups.com Received: Tuesday, February 28, 2017, 7:47 AM Any advice or hints on getting scope.py tuned and then to stay tuned? (I'm trying to listen to New Jersey Interoperability Communications System -- P25 Phase II -- in case it matters.) When I first played with op25 a few months ago, I stuck it on a spare computer with a NooElec SDR dongle. Took a little futzing but I had it up and running in a day or so and it actually stayed working perfectly for close to 6 weeks. But this was just a test so that computer wasn't on a UPS and shut down during a power failure. Same hardware and I haven't been able to get it to stay tuned for more than a few hours since. Figured maybe it was just the SDR dongle drifting so I bought a RTL-SDR dongle which is supposed to drift less but I'm still having problems getting the system to tune for more than 30 minutes or so. Your thoughts are appreciated. Thanks, -- Apu <apu at spfld.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20170301/beb5f026/attachment.htm>