[op25-dev] Re: HELP lol

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.

allanjs1986 charmingajs007 at hotmail.com
Fri Apr 20 08:03:11 UTC 2012


Hi it comes from the sample op25 flowchart.
[IMG]http://i43.tinypic.com/6h5837.png[/IMG]
[IMG]http://i40.tinypic.com/534g8p.png[/IMG]

 
--- In op25-dev at yahoogroups.com, Balint <balint256 at ...> wrote:
>
> Hi,
> 
>  
> 
> I haven't encountered that error message before myself. Is that in a GRC
> flowgraph you fashioned, or when you run the sample one I have the
> gr-baz/samples directory?
> 
>  
> 
> That block output (with the 'msg' type) must be used with the Message
> Callback block (also in gr-baz) to handle auto-tuning messages sent by the
> FSK4 demodulator. Alternatively, you can choose to switch off that output
> port in the OP25 decoder block's properties.
> 
>  
> 
> Hopefully that helps - let me know!
> 
>  
> 
> PS: Regarding running audio_p25_rx.py, I have in the past used some variant
> of:
> 
>  
> 
> sudo ./audio_p25_rx.py -a -I hw:1,0 -g 15
> 
>  
> 
> 'sudo' was necessary for creating the 'tun' device so I could capture frames
> in Wireshark. '-I hw:1,0' was to select the second (non-default) sound card
> (you could leave this off if using the default), and '-g' would have been
> for the gain. YMMV!
> 
>  
> 
> I believe there is another example of a full command line you could specify
> on the OP25 wiki. (You can also just put an '-h' on the end to explore the
> available options.)
> 
>  
> 
> From: op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] On Behalf
> Of allanjs1986
> Sent: Wednesday, 11 April 2012 9:41 PM
> To: op25-dev at yahoogroups.com
> Subject: [op25-dev] Re: HELP lol
> 
>  
> 
>   
> 
> Hi thanks in the op25 decoder block in GRC there is an error msg
> >>> Source - tune(2):
> Type "msg" is not a possible type.
> 
> And how the hec do i run the ./audio_p25_rx.py -a command in terminal
> If you cant tell i am a complete noob.
>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20120420/aba9c89d/attachment.htm>


More information about the op25-dev mailing list